Mike McBride Jost Schenck 01/02/2001 1.00.00 KDE KControl panel The &kde; panel (often referred to as &kicker;) is the bar that you'll usually find at the bottom of the screen when you start up &kde; for the first time. The panel gives you quick access to applications and makes it easier for you to organize your desktop. Using the &kde; panel you can for example launch applications using the K menu or the application buttons switch desktops using the panel's pager applet switch active windows, and minimize or maximize them browse directory using the browser menu functionality access panel applets that extend the panel's functionality, offering for example mixers, clocks or a system monitor In the General tab you can configure some basic functionality of the &kde; panel (&ie; functionality you'd find in other panel applications as well; later we'll come to the more interesting features). In the Panel Location frame you can choose which screen border the panel should be attached to. Please note that usually the available space is used more efficiently if the panel is aligned horizontally, &ie; attached to the top or bottom screen border. If you want to play around with different settings you can change the panel's position even easier by dragging the panel from one border to the other. The panel's size can be tiny, small, medium or large. Depending on which applets you use you may find that some applets work better at different panel sizes. Depending on your screen resolution you may find that the panel takes away too much of your precious screen real estate. To save screen space, the panel offers an auto hide feature. When this feature is enabled, the panel will hide when the mouse cursor has not been moved over it for a configurable amount of time. If you move the mouse to the panel's screen border it will show up again. Check the Enable automatic hide option in the Automatic Hide frame to enable this feature. Using the Delay in seconds slider you can configure the amount of time the panel will wait before it hides. Preferred terminal application is the default terminal program to be used by the QuickBrowser when you select Open in Terminal. It's very likely you don't need to change this option. Using the Look & Feel tab you can configure the panel's overall appearance. When the panel's hide buttons are enabled you'll see buttons on both sides of the panel, with arrows showing to the screen border. If you click on one of these buttons, the panel will slide away in that direction. After that, you'll see a remaining show button in that corner, which will make the panel show again. Check the Enable hide buttons option to enable this feature. Using the slider you can change the width of the buttons. Using the Manual Hide Animation (for the hide buttons) and Auto Hide Animation (for the auto hide functionality) options you can configure whether the panel will softly slide away or just disappear. You can enable or disable both animations using the Enable options and you can change the speed of the animation using the sliders. The Background Image is a picture that will be used to draw the panel's background, just like you can use a picture for the desktop background. Check the Enable background image option to enable this feature. You can specify an image file in the line edit box below or choose one by clicking on the Browse button. You'll see a preview of the selected picture on the right. In the Menus tab you can configure the panel menu's behavior. This affects the K menu you will often use to launch applications, the browser menus you can use to access directories and other menus like the recent documents menu. The K Menu Layout frame offers you some options to configure the K menu's functionality. The Show "Bookmarks" submenu and Show "Recent Documents" submenu options will enable submenus showing your konqueror bookmarks and the last documents you've opened using &kde; applications respectivly. The Show "Quick Browser" submenu option will enable a browser menu. Merge different menu locations will show all applications in the same directories, regardless of where the corresponding configuration files are stored: for example, enabling this option will show system wide applications in your Applications menu as well as you own ones. If you'd disable this option, there would be one applications menu for the whole system and one in a submenu containing only your personal entries. The menu cache is a feature that can make the panel's menus appear faster on screen: instead of reading the menu information from disk every time you access a menu, the panel will remember menu entries after accessing the menus for the first time. However, depending on the amount of memory available to your system, you might want this cache to be cleared after some time. Check the Clear menu cache option if you want the cache to be cleared after some time. You can configure the amount of time after which the cache will be cleared using the slider below. In the Browser Menus frame you can configure whether the panel's browser menus will show hidden files or not (hidden files on unix systems are those whose filenames begin with a dot) as well as how many files at most will be shown in a browser menu. The latter option may be especially useful if you have a rather small screen resolution, as then the browser menus will quickly fill up your screen when you browse directories containing many files. The quick start section in the K menu offers quick access to programs you have used often or recently. In the "Quick Start" section contains frame you can choose whether this section will show the most recently or the most frequently used programs. Using the option Max number of "Quick Start" entries you can configure how many programs the quick start section will remember. The &kde; panel supports so-called tiled buttons. This means that the buttons shown on the panel will be drawn using configurable images. To enable button tiling, check the Enable background tiles option in the Buttons tab. Then you can configure tiles for certain kinds of buttons. For every kind of panel button there's a frame offering an Enabled option to enable or disable tiled images. If tiles are enabled for this kind of button, you can choose a tile in the combo box below and the box on the right will show a preview of this tile. Applets are small plugins that extend the pager's functionality. &kde; comes with some applets but they may be provided by third parties as well. Panel applets can be started using two different ways: internal or externally. While internal is the preferred way to load applets, this can raise stability or security problems when you are using poorly programmed third-party applets. To address these problems, applets can be marked trusted. You might want to configure the panel to treat trusted applets different from untrusted ones. Your options are: Load only trusted applets internal: All applets but the ones marked trusted will be loaded using an external wrapper application. Load startup config applets internal: The applets shown on &kde; startup will be loaded internally, others will be loaded using an external wrapper application. Load all applets internal: will load all applets internally, regardless of whether they're trusted or not. For stability and security reasons, we recommend using one of the first two options and that you mark only those applets as 'trusted' that come with the &kde; base packages. To mark applets trusted or untrusted you can move them from one of the shown listboxes to the other. Just try selecting an applet in the list of trusted applets and click the >> button. This will move the selected applet to the other list, while clicking the << button will move the selected applet of the list of available applets to the list of trusted ones. This section written by: Jost Schenck jost@schenck.de Minor update by Mike McBride mpmcbride7@yahoo.com