7.2.4. Direct Page Addressing Since all of the addressing modes indicated in Table 7.2.4 are applicable to the data of the direct page (P=0: addresses 0000-00FF P=1: address 0000 - 01FF) designated by the direct page (P) flag. it is possible to manipulate the data in various ways. In additon byte efficiency also improves due to the fact that direct address designation is possible by one-byte data within the command words. Moreover, since effective commad cycles also decrease data can be accessed more rapidly. Table 7.2.4. Memory Access Addressing Effective Address -------------------------------------------------------------------- #of Effective Addr. Region Simbol | Addressing Bytes 0000-01FF 1FFF 1FFF -------------------------------------------------------------------- dp Direct Page 2 X X dp+X X-Indexed Direct Page 2 X X dp+Y Y-Indexed Direct Page 2 X X (X) Indirect 1 X X (X)+ Indirect Auto-increment 1 X X dp,dp Direct Page to D.P. 3 X X (X),(Y) Indirect Page to I.P. 1 X X dp Inm Inmediate Data to D.P. 3 X X dp, bit Direct Page Bit 2 X X dp,bit,rel Direct Page Bit Relative 3 X X mem, bit Absolute Boolean Bit 3 X X labs Absolute 3 X X X labs+X X-indexed Absolute 3 X X X labs+Y Y-indexed Absolute 3 X X X (dp+X) X-indexed Indirect 2 X X X (dp)+Y Indirect Y-indexed Indirect 2 X X X --------------------------------------------------------------------