7.2.3. Area of Applicable Bit Operation Commads. (i) The commads SET1 (set memory bit) and CLR1 (clear memory bit) are applicable to one-bit data with the direct page. (ii) The commands TSET1 (test and set bit) and TCLR1 ( test and clear bit) are applicable to the total 64K byte region. (iii) The Boolean operation commands (AND1, OR1, EOR1, MOV1, NOT1) are applicable to the 8K byte region of 0000 - 1FFF. Fig. 7.2.3. Region of Applicable Bit Operation Commands. ---------------------------------------------------------- 0000 | | | | | | | | | SET1, CLR1 | | AND1,OR1,EOR1, | | TSET1,TCLR1 | | | applicable | | MOV1,NOT1 | | | | | to direct | | | | | 00FF | | page. | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 01FF | ------------- | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1FFF | ------------------ | | | | | | | | | | | | | | | | | | | | 7FFF | ------------- | | | | | Unusuable | FFBF | | | FFC0 | ------------- | | | | | IPL-ROM | | | | FFFF | | | ----------------------------------------------------------