DrakX 0.1 - en to unknown language translation catalogue (1666 entries)

en: 		 user name: %s
    		 on path: %s
target: 		 name user: %s
    		 di path: %s

en: 	-Network by FTP.
target: 	-Network dg FTP.

en: 	-Network by SSH.
target: 	-Network dg SSH.

en: 	Backups use tar and bzip2
target: 	Backup dengan tar dan bzip2

en: 	Backups use tar and gzip
target: 	Backup dengan tar dan gzip

en: 	Do not include System Files
target: 	Jangan masukkan File Sistem

en: 
    
    
    We are now going to configure the %s connection.
    
    
    Press OK to continue.
target: 
    
    
    Konfigurasi koneksi %s.
    
    
    Tekan OK utk mulai.

en: 
    
    (WARNING! You're using XFS for your root partition,
    creating a bootdisk on a 1.44 Mb floppy will probably fail,
    because XFS needs a very large driver).
target: 
    
    (PERINGATAN! Anda menggunakan XFS untuk partisi root,
    pembuatan bootdisk di disket 1.44 Mb mungkin gagal,
    karena XFS perlu driver amat besar).

en: 
    
    Please check whether Printerdrake did the auto-detection of your printer model correctly. Search the correct model in the list when the cursor is standing on a wrong model or on "Raw printer".
target: 
    
    Periksa apakah Printerdrake mendeteksi otomatis model printer Anda dengan benar. Cari model yang benar di daftar jika kursor menunjukkan model yang salah atau di "Printer telanjang".

en: 
                          DrakBackup Daemon Report
target: 
                          Laporan Daemon DrakBackup

en: 
                          DrakBackup Report
target: 
                          Laporan DrakBackup

en: 
                        DrakBackup Report Details
target: 
                        Detil Laporan DrakBackup

en: 
     Some errors during sendmail are caused by 
     a bad configuration of postfix. To solve it you have to
     set myhostname or mydomain in /etc/postfix/main.cf
target: 
     Beberapa error saat sendmail disebabkan oleh 
     konfigurasi buruk postfix. Utk mengatasinya 
     myhostname atau mydomain di /etc/postfix/main.cf harus diset

en: 
    (!) FTP connexion problem: It was not possible to send your backup files by FTP.
target: 
    (!) problem koneksi FTP: Gagal mengirim file backup dengan FTP.

en: 
    - Daemon (%s) include :
target: 
    - Cakupan daemon (%s) :

en: 
    - Options:
target: 
    - Opsi:

en: 
    - Other Files:
target: 
    - File Lain:

en: 
    - Save on FTP on host : %s
target: 
    - Simpan di FTP di host : %s

en: 
    - Save on Hard drive on path : %s
target: 
    - Simpan di Hard drive di path : %s

en: 
    - System Files:
target: 
    - File Sistem:

en: 
    - User Files:
target: 
    - File User:

en: 
    Also printers configured with the PPD files provided by their manufacturers or with native CUPS drivers cannot be transferred.
target: 
    Juga printer yg terkonfigurasi dengan file PPD dari pabrik atau driver CUPS asli tak dapat ditransfer.

en: 
    Backup Sources:
target: 
    Sumber Backup:

en: 
    Chances are, this partition is
    a Driver partition, you should
    probably leave it alone.
target: 
    Mungkin partisi ini adalah 
    partisi driver, jadi sebaiknya
    jangan diapa-apain deh.

en: 
    Congratulations, your printer is now installed and configured!
    
    You can print using the "Print" command of your application (usually in the "File" menu).
    
    If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select "Printer" in the "Hardware" section of the Mandrake Control Center.
target: 
    Selamat, printer Anda kini terinstal dan terkonfigurasi!
    
    Anda dapat mencetak dg perintah "Cetak" di aplikasi Anda (biasanya di menu "File").
    
    Jika Anda ingin menambah, menghapus atau mengubah nama printer, atau jika ingin mengubah opsi standar setting (tray kertas, kualitas cetak, ...), pilih "Printer" di bagian "Perangkat Keras" Pusat Kontrol Mandrake.

en: 
    If you have an ISA card, the values on the next screen should be right.
    
    If you have a PCMCIA card, you have to know the irq and io of your card.
target: 
    Bila Anda punya card ISA, konfigurasi pada layar berikut nanti harusnya sudah benar.
    
    Bila Anda punya card PCMCIA, Anda harus mengetahui irq dan io kartu Anda itu.

en: 
    Mark the printers which you want to transfer and click 
    "Transfer".
target: 
    Tandai printer yg ingin Anda transfer lalu klik"Transfer".

en: 
    Normally, CUPS is automatically configured according to your network environment, so that you can access the printers on the CUPS servers in your local network. If this does not work correctly, turn off "Automatic CUPS configuration" and edit your file /etc/cups/cupsd.conf manually. Do not forget to restart CUPS afterwards (command: "service cups restart").
target: 
    Biasanya CUPS terkonfigurasi otomatis sesuai jaringan Anda, sehingga Anda dapat mengakses printer di server CUPS jaringan lokal Anda. Jika tak jalan, matikan "Konfigurasi CUPS otomatis" dan edit /etc/cups/cupsd.conf secara manual. Jangan lupa restart CUPS selanjutnya (komando: "service cups restart").

en: 
    Please check all options that you need.
target: 
    Periksa semua opsi yang Anda inginkan.

en: 
    Printers on remote CUPS servers you do not have to configure here; these printers will be automatically detected.
target: 
    Printer pada server CUPS remote tak perlu dikonfigurasikan di sini; printer ini akan secara otomatis dideteksi.

en: 
    Restore Backup Problems:
    
    During the restore step, Drakbackup will verify all your
    backup files before restoring them.
    Before the restore, Drakbackup will remove 
    your original directory, and you will loose all your 
    data. It is important to be careful and not modify the 
    backup data files by hand.
target: 
    Problem Restore Backup:
    
    Saat tahap restore, Drakbackup akan mencek semua file
    backup sebelum menempatkannya kembali. Sebelum restore,
    Drakbackup akan menghapus direktori asli Anda, dan Anda
    akan kehilangan semua data. Hati-hati dan jangan mengubah
    file data backup secara manual.

en: 
    The "%s" and "%s" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. "%s <file>".
target: 
    Komando "%s" dan "%s" juga memungkinkan modifikasi setting opsi job cetak tertentu. Tambahkan setting yg diinginkan ke baris perintah, misalnya "%s <file>".

en: 
    The "%s" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. "%s <file>".
target: 
    Komando "%s" juga memungkinkan modifikasi setting job cetak tertentu. Tambahkan setting yang diinginkan ke baris perintah, mis. "%s <file>".

en: 
    This special Bootstrap
    partition is for
    dual-booting your system.
target: 
    partisi ini adalah partisi bootstrap
    yang khusus digunakan 
    oleh sistem dual boot.

en: 
    Warning
    
    Please read carefully the terms below. If you disagree with any
    portion, you are not allowed to install the next CD media. Press 'Refuse' 
    to continue the installation without using these media.
    
    
    Some components contained in the next CD media are not governed
    by the GPL License or similar agreements. Each such component is then
    governed by the terms and conditions of its own specific license. 
    Please read carefully and comply with such specific licenses before 
    you use or redistribute the said components. 
    Such licenses will in general prevent the transfer,  duplication 
    (except for backup purposes), redistribution, reverse engineering, 
    de-assembly, de-compilation or modification of the component. 
    Any breach of agreement will immediately terminate your rights under 
    the specific license. Unless the specific license terms grant you such
    rights, you usually cannot install the programs on more than one
    system, or adapt it to be used on a network. In doubt, please contact 
    directly the distributor or editor of the component. 
    Transfer to third parties or copying of such components including the 
    documentation is usually forbidden.
    
    
    All rights to the components of the next CD media belong to their 
    respective authors and are protected by intellectual property and 
    copyright laws applicable to software programs.
target: 
    Peringatan
    
    Mohon dibaca dulu semua ketentuan di bawah. Bila Anda tidak setuju dengan salah satu bagiannya
    Anda tidak dapat menginstal media CD berikutnya. Silakan tekan 'Tolak' untuk melanjutkan instalasi
    tanpa menggunakan media ini.
    
    
    Ada beberapa komponen yang ada di media CD berikutnya tidak dilepas dalam lisensi GPL atau perjanjian
    sejenis. Komponen-komponen itu diatur dalam ketentuan dan kondisi dalam lisensi yang bersangkutan.
    Baca dengan hati-hati dan penuhi setiap lisensi sebelum Anda menyebarkan komponen tersebut.
    Model lisensi tersebut akan melarang proses transfer, duplikasi (kecuali untuk alasan backup), penyebaran
    kembali, rekayasa ulang, de-assembly, de-kompilasi, atau modifikasi pada komponen tersebut.
    Tiap pelanggaran pada perjanjian akan segera mengakhiri hak-hak Anda dalam lisensi tersebut.
    Kecuali bila dibolehkan, Anda tidak dapat menginstall program ini dalam lebih dari satu sistem
    atau menggunakannya di jaringan. Bila Anda masih ragu, silakan huibungi langsung distributor
    atau editor komponen ini. Anda dilarang mentransfer komponen ini ke pihak ketiga atau mengkopinya.
    
    
    Semua hak pada komponen di media CD berikutnya dimiliki oleh pembuatnya masing-masing
    dan dilindungi oleh hukum hak cipta dan hak intelektual khusus untuk program komputer.

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard allows you to install local or remote printers to be used from this machine and also from other machines in the network.
    
    It asks you for all necessary information to set up the printer and gives you access to all available printer drivers, driver options, and printer connection types.
target: 
    Selamat Datang di Dukun Setup Printer
    
    Dukun ini dapat menginstal printer lokal atau remote utk digunakan dari mesin ini dan juga dari mesin lain di network.
    
    Dia akan menanyai semua info yg dibutuhkan utk menset up printer dan memberi Anda akses ke semua driver printer tersedia, opsi driver, dan tipe koneksi printer.

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard will help you to install your printer(s) connected to this computer.
    
    Please plug in your printer(s) on this computer and turn it/them on. Click on "Next" when you are ready, and on "Cancel" when you do not want to set up your printer(s) now.
    
    Note that some computers can crash during the printer auto-detection, turn off "Auto-detect printers" to do a printer installation without auto-detection. Use the "Expert Mode" of printerdrake when you want to set up printing on a remote printer if printerdrake does not list it automatically.
target: 
    Selamat Datang di Dukun Setup Printer
    
    Dukun ini membantu Anda menginstal printer terhubung dengan komputer ini.
    
    Hubungkan printer Anda ke komputer ini dan nyalakan. Klik "Lanjut" jika siap, atau "Batal" bila Anda tak ingin men-set up printer sekarang.
    
    Ingat bahwa beberapa komputer bisa crash saat deteksi otomatis printer, matikan "Deteksi otomatis printer" utk instalasi printer tanpa deteksi otomatis. Pakailah "Mode Ahli" printerdrake bila Anda ingin set up pencetakan di printer remote jika printerdrake tak otomatis menampilkannya.

en: 
    Welcome.
    
    The parameters of the auto-install are available in the sections on the left
target: 
    Selamat Datang.
    
    Parameter instalasi otomatis tersedia di bagian sebelah kiri

en: 
    You can connect to Internet or reconfigure your connection.
target: 
    Anda bisa sambungkan koneksi ke Internet atau mengkonfigurasikan ulang.

en: 
    You can disconnect or reconfigure your connection.
target: 
    Anda bisa putuskan atau konfigurasi koneksi yang ada sekarang.

en: 
    You can reconfigure your connection.
target: 
    Anda bisa mengkonfigurasikan ulang koneksi ini

en: 
    try to change some parameters
target: 
    coba ubah beberapa parameter

en:           All your selectionned data have been
target:           Semua data terpilih telah

en:           Successfuly Restored on %s
target:           Berhasil Disimpan Ulang di %s

en:          Restore Configuration
target:          Simpan Ulang Konfigurasi

en:   <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen
target:   <Tab>/<Alt-Tab> untuk pindah | <Spasi> untuk pilih | <F12> Layar berikut

en:  (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...).
target:  (Port Paralel: /dev/lp0, /dev/lp1, ..., sebanding dengan LPT1:, LPT2:, ..., printer USB pertama: /dev/usb/lp0, printer USB kedua: /dev/usb/lp1, ...).

en:  Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\@epita.fr>
target:  Haksalin (C) 2001 MandrakeSoft oleh DUPONT Sebastien <dupont_s\@epita.fr>

en:  This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2, or (at your option)
     any later version.
    
     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     GNU General Public License for more details.
    
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
target:  Program ini gratis; Anda dapat menyebar ulang dan/atau mengubah
     menurut Lisensi Publik Umum GNU dari the Free Software Foundation; baik
     versi 2, atau yang lebih baru.
    
     Program ini disebar agar dapat berguna, tapi TANPA GARANSI APAPUN; bahkan
     tanpa garansi sebagai implikasi DAGANG atau KELAYAKAN UNTUK KEGUNAAN
     TERTENTU. Info lebih lanjut ada di Lisensi Publik Umum GNU.
    
     Anda mestinya sudah menerima salinan Lisensi Publik Umum GNU dari program
     ini; jika tidak, tulis ke the Free Software
     Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

en:  on parallel port \/*%s
target:  di port paralel \/*%s

en: "Menu" key
target: Kunci "Menu"

en: %d minutes
target: %d menit

en: %d packages
target: %d paket

en: %d seconds
target: %d detik

en: %s formatting of %s failed
target: %s proses format dari %s gagal

en: %s found on %s, configure it ?
target: %s ditemukan di %s, konfigurasikan?

en: (!) Error during mail sending.
target: (!) Kesalahan saat pengiriman surat.

en: (This) DHCP Server IP
target: IP Server DHCP (Ini)

en: (already added %s)
target: (sudah ditambahkan %s)

en: (module %s)
target: (modul %s)

en: (on %s)
target: (di %s)

en: (on this machine)
target: (di mesin ini)

en: , %s sectors
target: , %s sektor

en: , TCP/IP host "%s", port %s
target: , host TCP/IP "%s", port %s

en: , USB printer \/*%s
target: , printer USB \/*%s

en: , multi-function device
target: , alat multifungsi

en: , multi-function device on HP JetDirect
target: , alat multifungsi di HP JetDirect

en: , multi-function device on USB
target: , alat multifungsi di USB

en: , multi-function device on parallel port \/*%s
target: , alat multifungsi di port paralel \/*%s

en: , printing to %s
target: , cetak ke %s

en: , using command %s
target: , menggunakan perintah %s

en: /File/Save _As
target: /File/Simpan _Dengan nama lain

en: /File/_New
target: /File/B_aru

en: /File/_Open
target: /File/_Buka

en: /File/_Quit
target: /File/_Keluar

en: /File/_Save
target: /File/_Simpan

en: /Options/Test
target: /Pilihan/Test

en: /_Options
target: /_Pilihan

en: 1 button
target: 1 tombol

en: 1 minute
target: 1 menit

en: 16 million colors (24 bits)
target: 16 juta warna (24 bits)

en: 2 buttons
target: 2 tombol

en: 256 colors (8 bits)
target: 256 warna (8 bits)

en: 256 kB
target: 256 kb

en: 3 buttons
target: 3 tombol

en: 32 thousand colors (15 bits)
target: 32 ribu warna (15 bits)

en: 4 billion colors (32 bits)
target: 4 milyar warna (32 bits)

en: 512 kB
target: 512 kb

en: 64 MB or more
target: 64 MB atau lebih

en: 65 thousand colors (16 bits)
target: 65 ribu warna (16 bits)

en: 8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)
target: 8514 Kompatibel, 1024x768 pada 87 Hz interlaced (no 800x600)

en: <- Previous
target: <- Tahap sebelumnya

en: => Notice, a label changed:
    %s
target: => Catatan, label berubah:
    %s

en: => There are many things to choose from (%s).
target: => Banyak yang dapat dipilih dari (%s).

en: A custom bootdisk provides a way of booting into your Linux system without
    depending on the normal bootloader. This is useful if you don't want to install
    LILO (or grub) on your system, or another operating system removes LILO, or LILO doesn't
    work with your hardware configuration. A custom bootdisk can also be used with
    the Mandrake rescue image, making it much easier to recover from severe system
    failures. Would you like to create a bootdisk for your system?
    %s
target: Bootdisk baru membantu Anda untuk melakukan boot sistem Linux tanpa
    tergantung pada bootloader. Kadang ini berguna bila Anda tidak mau install
    lilo (ataw grub) di sistem Anda, atau saat sistem operasi lain menghapus lilo, atau lilo
    tidak bisa digunakan pada konfigurasi hardware Anda. Bootdisk ini juga bisa digunakan
    dengan image rescue Mandrake, yang memudahkan kita untuk merecover sistem
    dari kegagalan. Sekarang, saya mau tanya nih... mau bikin bootdisk nggak ?
    %s

en: A custom bootdisk provides a way of booting into your Linux system without
    depending on the normal bootloader. This is useful if you don't want to install
    SILO on your system, or another operating system removes SILO, or SILO doesn't
    work with your hardware configuration. A custom bootdisk can also be used with
    the Mandrake rescue image, making it much easier to recover from severe system
    failures.
    
    If you want to create a bootdisk for your system, insert a floppy in the first
    drive and press "Ok".
target: Bootdisk baru membantu Anda untuk melakukan boot sistem Linux tanpa
    tergantung pada bootloader. Kadang ini berguna bila Anda tidak mau install
    SILO  di sistem Anda, atau saat sistem operasi lain menghapus SILO, atau SILO
    tidak bisa digunakan pada konfigurasi hardware Anda. Bootdisk ini juga bisa digunakan
    dengan image rescue Mandrake, yang memudahkan kita untuk merecover sistem
    dari kegagalan. Sekarang, saya mau tanya nih... mau bikin bootdisk nggak ?

en: A full range of Linux solutions, as well as special offers on products and 'goodies', are available online at our e-store
target: Solusi Linux lengkap, termasuk sajian khusus produk dan 'goodies', tersedia online di e-store kami

en: A graphical environment with user-friendly set of applications and desktop tools
target: Environment grafis dengan kumpulan aplikasi dan tool desktop yang mudah digunakan

en: A library which defends against buffer overflow and format string attacks.
target: Library penahan serangan string format dan overflow buffer

en: A printer named "%s" already exists under %s. 
    Click "Transfer" to overwrite it.
    You can also type a new name or skip this printer.
target: Printer bernama "%s" telah ada di %s. 
    Klik "Transfer" untuk menindihnya.
    Anda juga dapat menuliskan nama baru atau melewatkan printer ini.

en: A problem occured while restarting the network: 
    
    %s
target: Problem terjadi saat restart netword:
    
    %s

en: A tool to monitor your logs
target: Penampil log Anda

en: A valid URI must be entered!
target: Harus diisi URI valid!

en: ADSL connection
target: Koneksi ADSL

en: ALL existing partitions and their data will be lost on drive %s
target: SEMUA partisi yang ada beserta data pada drive %s akan hilang

en: Abort
target: Batal

en: Accept
target: Terima

en: Accept user
target: Buat user

en: Account Login (user name)
target: Login Account (username)

en: Account Password
target: Katasandi Account

en: Activates/Deactivates all network interfaces configured to start
    at boot time.
target: Aktif/nonaktifkan semua interface network yang terkonfigurasi nyala
    pada saat boot.

en: Add
target: Tambah

en: Add a new printer
target: Tambah printer baru

en: Add a user
target: Tambahkan user

en: Add an item
target: Tambah item

en: Add this printer to Star Office/OpenOffice.org
target: Tambah printer ini ke Star Office/OpenOffice.org

en: Add to LVM
target: Tambahkan ke LVM

en: Add to RAID
target: Tambahkan ke RAID

en: Add user
target: Tambah user

en: Adding printer to Star Office/OpenOffice.org
target: Penambahan printer ke Star Office/OpenOffice.org

en: Advanced
target: Tambahan

en: Advanced Configuration
target: Konfigurasi Lanjutan

en: Advanced Options
target: Opsi Lanjutan

en: After changing type of partition %s, all data on this partition will be lost
target: Setelah mengganti tipe partisi %s, semua data pada partisi ini akan hilang

en: After formatting partition %s, all data on this partition will be lost
target: Sehabis memformat partisi %s semua data pada partisi ini akan hilang

en: After resizing partition %s, all data on this partition will be lost
target: Sehabis meresize partisi %s, semua data pada partisi ini akan hilang

en: After this is done, we recommend that you restart your X environment to avoid any hostname-related problems.
target: Setelah itu, silakan restart X Anda agar bebas dari masalah pergantian
    nama host.

en: Albanian
target: Albania

en: Alcatel speedtouch usb
target: usb speedtouch Alcatel

en: All
target: Semua

en: All data on this partition should be backed-up
target: semua data pada partisi ini sebaiknya dibackup dulu

en: All primary partitions are used
target: Semua partisi primary telah digunakan

en: Allow all users
target: Izinkan semua user

en: Alt and Shift keys simultaneously
target: Kunci Alt dan Shift bersamaan

en: Alternative test page (A4)
target: Halaman tes alternatif (A4)

en: Alternative test page (Letter)
target: Halaman tes alternatif (Letter)

en: Amusement programs: arcade, boards, strategy, etc
target: Program permainan: arcade, board, strategi, dsb

en: An error has occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem
target: Error - tidak ada device yang valid untuk membuat filesystem baru. Periksa kembali hardware untuk mencari penyebabnya

en: An error has occurred, try to change some parameters
target: Ada kesalahan, coba ubah beberapa parameter

en: An error has occurred:
target: Ada error:

en: An error occurred
target: Ada error

en: An error occurred, but I don't know how to handle it nicely.
    Continue at your own risk.
target: Ada error nih, tapi aku tak tahu cara mengatasinya.
    Lanjutkan saja, tapi resiko tanggung sendiri yah.

en: Anacron a periodic command scheduler.
target: Skeduler command periodik, Anacron

en: Any partitions that have been newly defined must be formatted for use
    (formatting means creating a filesystem).
    
    At this time, you may wish to reformat some already existing partitions to
    erase any data they contain. If you wish to do that, please select those
    partitions as well.
    
    Please note that it is not necessary to reformat all pre-existing
    partitions. You must reformat the partitions containing the operating
    system (such as "/", "/usr" or "/var") but you do not have to
    reformat partitions containing data that you wish to keep (typically
    "/home").
    
    Please be careful when selecting partitions. After formatting, all data on
    the selected partitions will be deleted and you will not be able to recover
    any of it.
    
    Click on "OK" when you are ready to format partitions.
    
    Click on "Cancel" if you want to choose another partition for your new
    Mandrake Linux operating system installation.
    
    Click on "Advanced" if you wish to select partitions that will be checked
    for bad blocks on the disk.
target: Tiap-tiap partisi yang telah dibuat harus diformat agar dapat digunakan
    (format berarti membuat filesystem).
    
    Sekarang Anda bisa mem-format ulang partisi yg ada utk dihapus datanya.
    BIla ini hendak Anda lakukan, pilihlah partisi yang hendak diformat.
    
    Ingat, Anda tak perlu melakukan format ulang pada semua partisi yg ada.
    Anda perlu mem-format ulang partisi yg akan diisi sistem operasi (misalnya
    pada partisi "/", "./usr", atau "/var"), tapi tak perlu melakukannya
    pada partisi berisi data yang masih akan digunakan (misalnya "/home").
    
    Hati-hati dalam memilih partisi. Setelah diformat semua data akan hilang
    dan tak dapat dikembalikan ke kondisi semula.
    
    Klik "OK" bila Anda siap mem-format partisi.
    
    Klik "Batal" jika Anda ingin memilih partisi lain utk instalasi sistem
    operasi Mandrake Linux baru Anda.
    
    Klik "Tambahan" jika ingin memilih partisi yg akan dicek blok rusaknya
    di disk.

en: Apache is a World Wide Web server. It is used to serve HTML files and CGI.
target: Apache adalah server World Wide Web. Dia dipakai untuk menyediakan file
    HTML dan CGI.

en: Apache, Pro-ftpd
target: Apache dan Pro-ftpd

en: Append
target: Sambung

en: Apply
target: Pasang

en: Archiving, emulators, monitoring
target: Arsip, emulator, pemantauan

en: Are you running a POP or IMAP server here? This would
    be used to host non-web-based mail accounts for people via 
    this machine.
target: Apakah Anda menjalankan server POP atau IMAP ?
    Fasilitas ini bisa digunakan untuk menampung account email non web untuk
    umum.

en: Are you running a mail server here? If you're sending you 
    messages through pine, mutt or any other text-based mail client,
    you probably are.  Otherwise, you should firewall this off.
target: Apakah Anda menjalankan server mail ? Bila Anda mengirimkan email
    dengan menggunakan pine, mutt, atau klien mail teks, maka sebaiknya iya.
    Selainnya, matikan saja deh.

en: Are you running a name server on this machine? If you didn't set one
    up to give away IP and zone information to the whole Internet, please
    answer no.
target: Apakah Anda menjalankan Name server di komputer ini? Bila Anda
    tidak menjalankan nameserver untuk menjawab informasi IP dan zone untuk Internet
    silakan jawab TIDAK.

en: Are you running a web server on this machine that you need the whole
    Internet to see? If you are running a webserver that only needs to be
    accessed by this machine, you can safely answer NO here.
target: Apakah Anda ingin webserver Anda juga dapat diakses dari Internet ??
    Bila Anda ingin webserver Anda HANYA ingin diakses dari KOMPUTER INI SAJA
    maka jawab saja TIDAK di sini

en: Are you running an FTP server here that you need accessible to the
    Internet? If you are, we strongly recommend that you only use it for
    Anonymous transfers. Any passwords sent by FTP can be stolen by some
    attackers, since FTP also uses no encryption for transferring passwords.
target: Apakah Anda hendak membuka koneksi FTP yang ingin diakses dari Internet?
    Bila ya, silakan gunakan saja untuk transfer anonimous. Katasandi yang dikirimkan
    oleh FTP bisa dicuri oleh cracker, karena FTP tidak diacak saat pertukaran katasandi terjadi.

en: Armenian (old)
target: Armenia (lama)

en: Armenian (phonetic)
target: Armenia (fonetik)

en: Armenian (typewriter)
target: Armenia (mesintik)

en: Assign raw devices to block devices (such as hard drive
    partitions), for the use of applications such as Oracle
target: Tunjuk raw device ke block devices (misalnya partisi hard drive),
    utk digunakan oleg aplikasi semacam Oracle

en: At the time you are installing Mandrake Linux, it is likely that some
    packages have been updated since the initial release. Some bugs may have
    been fixed, and security issues solved. To allow you to benefit from these
    updates, you are now proposed to download them from the Internet. Choose
    "Yes" if you have a working Internet connection, or "No" if you prefer
    to install updated packages later.
    
    Choosing "Yes" displays a list of places from which updates can be
    retrieved. Choose the one nearest you. Then a package-selection tree
    appears: review the selection, and press "Install" to retrieve and
    install the selected package(s), or "Cancel" to abort.
target: Saat Mandrake Linux diinstal, nampaknya beberapa paket telah diupdate sejak
    rilis awal. Beberapa kutu mungkin telah diperbaiki, dan masalah keamanan
    dipecahkan. Untuk memanfaatkan update ini Anda dianjurkan men-download dari
    internet. Pilih "Ya" jika ada koneksi internet aktif, atau "Tidak" jika
    ingin mengupdate paket lain waktu.
    
    Jika "Ya", daftar sumber download update akan ditampilkan. Pilih yang
    dekat. Lalu muncul pohon seleksi paket: lihat lagi pilihan Anda, tekan
    "Instal" untuk mengambil/nstal paket atau "Batal" jika tak jadi.

en: At this point, it is time to choose the security level desired for the
    machine. As a rule of thumb, the more exposed the machine is, and the more
    the data stored in it is crucial, the higher the security level should be.
    However, a higher security level is generally obtained at the expense of
    easiness of use. Refer to the "msec" chapter of the ``Reference Manual''
    to get more information about the meaning of these levels.
    
    If you do not know what to choose, keep the default option.
target: Kini waktunya memilih tingkat keamanan mesin. Makin terbuka suatu mesin,
    dan makin penting data di dalamnya, tingkat keamanannya harus makin tinggi.
    Tapi, level keamanan yang tinggi umumnya mengorbankan kemudahan pemakaian.
    Info ttg level keamanan dapat dilihat bab MSEC pada ``Manual Referensi''.
    
    Jika Anda tak tahu apa yg dipilih, tetaplah pada opsi standar.

en: At this point, you need to choose where you want to install the Mandrake
    Linux operating system on your hard drive. If your hard drive is empty or
    if an existing operating system is using all the available space, you will
    need to partition it. Basically, partitioning a hard drive consists of
    logically dividing it to create space to install your new Mandrake Linux
    system.
    
    Because the partitioning process' effects are usually irreversible,
    partitioning can be intimidating and stressful if you are an inexperienced
    user. Fortunately, there is a wizard which simplifies this process. Before
    beginning, please consult the manual and take your time.
    
    If you are running the installation in Expert mode, you will enter
    DiskDrake, the Mandrake Linux partitioning tool, which allows you to
    fine-tune your partitions. See the DiskDrake section in the ``User Guide''.
    From the installation interface, you can use the wizards as described here
    by clicking the dialog's "Wizard" button.
    
    If partitions have already been defined, either from a previous
    installation or from another partitioning tool, simply select those to
    install your Linux system.
    
    If partitions are not defined, you will need to create them using the
    wizard. Depending on your hard drive configuration, several options are
    available:
    
     * "Use free space": this option will simply lead to an automatic
    partitioning of your blank drive(s). You will not be prompted further;
    
     * "Use existing partition": the wizard has detected one or more existing
    Linux partitions on your hard drive. If you want to use them, choose this
    option;
    
     * "Use the free space on the Windows; partition": if MicrosoftWindows is
    installed on your hard drive and takes all the space available on it, you
    have to create free space for Linux data. To do so, you can delete your
    MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert
    mode'' solutions) or resize your MicrosoftWindows partition. Resizing can
    be performed without the loss of any data, provided you previously
    defragment the Windows partition. Backing up your data won't hurt either..
    This solution is recommended if you want to use both Mandrake Linux and
    MicrosoftWindows on the same computer.
    
       Before choosing this option, please understand that after this procedure,
    the size of your MicrosoftWindows partition will be smaller than at the
    present time. You will have less free space under MicrosoftWindows to store
    your data or to install new software;
    
     * "Erase entire disk": if you want to delete all data and all partitions
    present on your hard drive and replace them with your new Mandrake Linux
    system, choose this option. Be careful with this solution because you will
    not be able to revert your choice after you confirm;
    
       !! If you choose this option, all data on your disk will be lost. !!
    
     * "Remove Windows": this will simply erase everything on the drive and
    begin fresh, partitioning everything from scratch. All data on your disk
    will be lost;
    
       !! If you choose this option, all data on your disk will be lost. !!
    
     * "Expert mode": choose this option if you want to manually partition
    your hard drive. Be careful it is a powerful but dangerous choice. You can
    very easily lose all your data. Hence, do not choose this unless you know
    what you are doing.
target: Pada tahap ini, pilihlah tempat Mandrake Linux akan diinstal di harddisk.
    Bila harddisk masih kosong / ada sistem operasi lain yg mengisi seluruhnya,
    Anda perlu melakukan proses partisi. Pada dasarnya, proses partisi harddisk
    adalah membagi harddisk, dg membuat ruang kosong utk instalasi sistem
    Mandrake Linux.
    
    Karena bersifat satu arah (tak dapat dikembalikan ke keadaan awal), proses
    partisi dapat membuat stres dan pusing kepala, apalagi jika Anda belum
    berpengalaman. Untungnya, ada wizard yang mempermudah proses ini.
    Sebelum mulai, baca dan pelajari dulu buku manual dengan baik.
    
    Jika Anda menggunakan mode Ahli, Anda akan masuk DiskDrake, alat partisi
    Mandrake Linux, yg memungkinkan fine-tuning partisi Anda. Lihat manual bab
    DiskDrake. Dari antarmuka instalasi, Anda dapat menggunakan wizard seperti
    dijelaskan di sini dg meng-klik tombol "Wizard".
    
    Bila partisi-partisi tsb sudah ada sebelumnya (hasil instal sebelumnya
    atau hasil program partisi lain), pilihlah partisi tsb utk tempat instalasi
    sistem Linux Anda.
    
    Jika belum ada partisi, Anda perlu membuatnya dengan program wizard. Ada
    bbrp opsi tergantung konfigurasi harddisk Anda:
    
     * "Pakai ruang kosong": opsi ini akan secara otomatis mem-partisi drive
    kosong Anda. Anda takkan ditanya lebih jauh.
    
     * "Pakai partisi yang sudah ada": wizard mendeteksi satu/lebih partisi
    Linux di hard drive Anda. Jika Anda ingin menggunakannya, pilih opsi ini.
    
     * "Pakai ruang kosong pada partisi Mindows": jika wicrosoft mindows
    terinstal dan menghabiskan seluruh kapasitas disk, Anda perlu membuat ruang
    kosong untuk data Linux dg menghapus partisi dan data wicrosoft mindows
    (lihat solusi "Hapus seluruh disk" atau mode "Ahli") atau dapat juga
    mengubah ukuran partisi wicrosoft mindows. Cara ini dapat digunakan tanpa
    harus kehilangan data. Cara ini disarankan bila Anda ingin memakai Linux
    Mandrake dan wicrosoft mindows dlm satu komputer.
    
       Sebelum memilih cara ini, mohon maklum bahwa partisi wicrosoft mindows
    sekarang berukuran lebih kecil. Ruang dlm wicrosoft mindows utk menyimpan
    data / menginstall software baru menjadi kecil.
    
     * "Hapus seluruh disk": jika Anda ingin hapus semua data dan partisi di
    harddisk Anda utk kemudian digantikan semuanya oleh sistem Mandrake Linux,
    pilih opsi ini. Hati-hati, Anda tak dapat kembali setelah konfirmasi.
    
       !! Jika Anda pilih opsi ini semua data di disk Anda akan hilang. !!
    
     * "Buang Mindows": ini akan menghapus semua di drive dan mulai proses
    partisi dari nol. Semua data di disk akan hilang.
    
       !! Jika Anda pilih opsi ini semua data di disk Anda akan hilang. !!
    
     * "Mode ahli": pilih jika Anda ingin secara manual mempartisi harddisk.
    Awas! Cara ini amat perkasa tapi juga berbahaya. Anda bisa kehilangan data
    dg mudah. Jangan pilih kecuali Anda tahu yg Anda lakukan.

en: At this point, you need to choose which partition(s) will be used for the
    installation of your Mandrake Linux system. If partitions have already been
    defined, either from a previous installation of GNU/Linux or from another
    partitioning tool, you can use existing partitions. Otherwise, hard drive
    partitions must be defined.
    
    To create partitions, you must first select a hard drive. You can select
    the disk for partitioning by clicking on ``hda'' for the first IDE drive,
    ``hdb'' for the second, ``sda'' for the first SCSI drive and so on.
    
    To partition the selected hard drive, you can use these options:
    
     * "Clear all": this option deletes all partitions on the selected hard
    drive;
    
     * "Auto allocate": this option enables to automatically create "Ext2"
    and swap partitions in free space of your hard drive;
    
     * "More": gives access to additional features:
    
        * "Save partition table": saves the partition table to a floppy. Useful
    for later partition-table recovery if necessary. It is strongly recommended
    to perform this step;
    
        * "Restore partition table": allows to restore a previously saved
    partition table from floppy disk;
    
        * "Rescue partition table": if your partition table is damaged, you can
    try to recover it using this option. Please be careful and remember that it
    can fail;
    
        * "Reload partition table": discards all changes and loads your initial
    partition table;
    
        * "Removable media automounting": unchecking this option will force users
    to manually mount and unmount removable medias such as floppies and
    CD-ROMs.
    
     * "Wizard": use this option if you wish to use a wizard to partition your
    hard drive. This is recommended if you do not have a good knowledge of
    partitioning;
    
     * "Undo": use this option to cancel your changes;
    
     * "Toggle to normal/expert mode": allows additional actions on partitions
    (type, options, format) and gives more information;
    
     * "Done": when you are finished partitioning your hard drive, this will
    save your changes back to disk.
    
    Note: you can reach any option using the keyboard. Navigate through the
    partitions using [Tab] and [Up/Down] arrows.
    
    When a partition is selected, you can use:
    
     * Ctrl-c to create a new partition (when an empty partition is selected);
    
     * Ctrl-d to delete a partition;
    
     * Ctrl-m to set the mount point.
    
    To get information about the different filesystem types available, please
    read the ext2fs chapter from the ``Reference Manual''.
    
    If you are installing on a PPC machine, you will want to create a small HFS
    ``bootstrap'' partition of at least 1MB, which will be used by the yaboot
    bootloader. If you opt to make the partition a bit larger, say 50MB, you
    may find it a useful place to store a spare kernel and ramdisk images for
    emergency boot situations.
target: Kini Anda perlu menentukan partisi yg akan dipakai utk instalasi sistem
    Mandrake Linux. Jika partisi telah didefinisikan, pada instalasi
    GNU/Linux sebelumnya atau dg alat partisi lain, Anda dapat memakai partisi
    yang ada. Jika tidak, partisi harddisk harus didefinisikan.
    
    Utk membuat partisi, pertama pilihlah harddisk. Anda dapat memilih disk utk
    dipartisi dg mengklik "hda" utk harddisk IDE pertama, "hdb" utk disk
    kedua, "sda" untuk drive SCSI pertama dst.
    
    Untuk mempartisi harddisk terpilih, opsi berikut dapat digunakan:
    
     * "Hapus semua": opsi ini menghapus semua partisi pd harddisk terpilih.
    
     * "Alokasi otomatis": opsi ini memungkinkan Anda secara otomatis membuat
    partisi Ext2 dan swap di ruang kosong hard drive Anda.
    
     * "Tambahan": akses ke fitur tambahan:
    
        * "Simpan tabel partisi": simpan tabel partisi ke floppy. Berguna
    untuk pemulihan tabel-partisi di kemudian hari bila perlu. Amat disarankan.
    
        * "Pulihkan tabel partisi": mengembalikan tabel partisi yg disimpan
    sebelumnya dari floppy.
    
        * "Selamatkan tabel partisi": jika tabel partisi Anda rusak, cobalah
    mengembalikannya dg opsi ini. Hati-hati dan ingat bhw ini bisa gagal.
    
        * "Muat ulang tabel partisi": buang semua perubahan dan muat tabel
    partisi semula.
    
        * "Mount otomatis media lepas": Jika opsi ini dilepas, user harus
    secara manual me-mount/unmount media lepas seperti disket dan CD-ROM.
    
     * "Wizard": pilih ini jika ingin memakai wizard utk mempartisi harddisk.
    Disarankan jika Anda tak faham ttg partisi.
    
     * "Kembali": untuk membatalkan perubahan.
    
     * "Ubah ke mode normal/ahli": aksi tambahan proses partisi (tipe, opsi,
    format) dan informasi lebih.
    
     * "Selesai": simpan perubahan ke harddisk bila Anda selesai mempartisi.
    
    Catatan: Anda dapat meraih semua opsi dg memakai keyboard. Gunakan [Tab]
    dan panah [Up/Down].
    
    Saat partisi dipilih, Anda dapat menggunakan:
    
     * Ctrl-c utk membuat partisi baru (bila partisi kosong dipilih);
    
     * Ctrl-d utk menghapus partisi;
    
     * Ctrl-m utk menset titik mount
    
    Jika Anda menginstal mesin PPC Anda perlu membuat partisi "bootstrap" HFS
    kecil setidaknya 1MB yg akan dipakai oleh bootloader yaboot. Jika dibuat
    lebih besar, katakan 50MB, Anda bisa memanfaatkannya utk menyimpan kernel
    cadangan dan image ramdisk utk situasi boot darurat.

en: Audio-related tools: mp3 or midi players, mixers, etc
target: Tool untuk audio: player mp3 atau midi, mixer, dsb

en: Authentication
target: Autentikasi

en: Authentication LDAP
target: Otentikasi LDAP

en: Authentication NIS
target: Otentikasi NIS

en: Auto Install
target: Instalasi Otomatis

en: Auto Install Configurator
target: Konfigurasi Instalasi Otomatis

en: Auto allocate
target: Alokasi otomatis

en: Auto-Detection of Printers
target: Deteksi Otomatis Printer

en: Auto-detect printers
target: Printer deteksi otomatis

en: Automated
target: Otomatis

en: Automatic CUPS configuration
target: Konfigurasi CUPS otomatis

en: Automatic IP
target: IP otomatis

en: Automatic Steps Configuration
target: Konfigurasi Step Otomatis

en: Automatic detection and configuration of hardware at boot.
target: Deteksi dan konfigurasi otomatis hardware saat boot.

en: Automatic reconfiguration
target: Konfigurasi ulang otomatis

en: Automatic regeneration of kernel header in /boot for
    /usr/include/linux/{autoconf,version}.h
target: Regenerasi otomatis header kernel di /boot utk
    /usr/include/linux/{autoconf,version}.h

en: Automatic time synchronization (using NTP)
target: sinkronisasi waktu otomatis (dg NTP)

en: Automatically switch on numlock key locker under console
    and XFree at boot.
target: Secara otomatis nyalakan numlock saat boot pada console/XFree.

en: Autoprobe
target: Probe otomatis

en: Azerbaidjani (latin)
target: Azerbaijan (latin)

en: Backup Now
target: Backup Sekarang

en: Backup Now from configuration file
target: Backup Sekarang dari file konfigurasi

en: Backup Other files...
target: Backup file lain...

en: Backup User files...
target: Backup file User...

en: Backup Users
target: Backup User

en: Backup files are corrupted
target: File backup rusak

en: Backup other files
target: Backup file lain

en: Backup system
target: Backup sistem

en: Backup system files
target: Backup file sistem

en: Backup system files...
target: Backup file sistem...

en: Backup the system files before:
target: Backup file sistem sebelum:

en: Backup user files
target: Backup file user

en: Backup your System files. ( /etc directory )
target: Backup file System Anda. ( direktori /etc )

en: Bad backup file
target: File backup rusak

en: Bad choice, try again
target: Pilihan salah, silakan ulangi

en: Bad package
target: Paket Error

en: Based on the previous level, but the system is entirely closed.
    Security features are at their maximum.
target: Sama dengan level sebelumnya, tapi sistem sepenuhnya ditutup.
    Fitur sekuriti maksimum.

en: Basic
target: Dasar

en: Be careful: this operation is dangerous.
target: Hati-hati nih: operasi ini sangat berbuahayyya

en: Because you are doing a network installation, your network is already configured.
    Click on Ok to keep your configuration, or cancel to reconfigure your Internet & Network connection.
target: Jaringan Anda sudah terkonfigurasi lho
    Silakan klik OK untuk rekonfigurasi ulang koneksi jaringan/internet ini, atau batal jika Anda berubah pikiran.

en: Before continuing, you should read carefully the terms of the license. It
    covers the whole Mandrake Linux distribution, and if you do not agree with
    all the terms in it, click on the "Refuse" button which will immediately
    terminate the installation. To continue with the installation, click on the
    "Accept" button.
target: Sebelum melanjutkan Anda bacalah lisensi dg baik . Itu mencakup seluruh
    distribusi Mandrake Linux, dan jika Anda tak setuju dg semua pasal di
    dalamnya, klik "Tolak" agar instalasi terhenti. Untuk melanjutkan, klik
    "Terima".

en: Before installing any fonts, be sure that you have the right to use and install them on your system.
    
    -You can install the fonts using the normal way. In rare cases, bogus fonts may hang up your X Server.
target: Sebelum menginstl font, Anda harus punya hak memakai dan menginstalnya di sistem Anda.
    
    -Anda dapat menginstal font dengan cara normal. Terkadang, font palsu dapat membuat server X Anda hang.

en: Belarusian
target: Belarusia

en: Belgian
target: Belgia

en: Belgium
target: Belgia

en: Books and Howto's on Linux and Free Software
target: Buku dan Howto untuk Linux dan Free Software

en: Boot Protocol
target: Protokol Boot

en: Boot Style Configuration
target: Konfigurasi Tipe Boot

en: Boot device
target: Device boot

en: Boot from DOS/Windows (loadlin)
target: Boot dari DOS/windows (loadlin)

en: Bootloader installation
target: Instalasi Bootloader

en: Bootloader main options
target: Parameter Bootloader utama

en: Bootloader to use
target: Bootloader yang hendak digunakan

en: Both Shift keys simultaneously
target: Kedua Shift bersamaan

en: Brazilian (ABNT-2)
target: Brazil (ABNT-2)

en: Bringing down the network
target: Matikan Jaringan

en: Bringing up the network
target: Up-kan Jaringan

en: Build Backup
target: Bangun Backup

en: Bulgarian (BDS)
target: Bulgaria (BDS)

en: Bulgarian (phonetic)
target: Bulagaria (fonetik)

en: Button 2 Emulation
target: Emulasi 2 tombol

en: Button 3 Emulation
target: Emulasi tombol 3

en: Button `%s': %s
target: Tombol `%s': %s

en: Buttons emulation
target: Emulasi tombol

en: C and C++ development libraries, programs and include files
target: Librari, program, dan file include untuk pemrograman C dan C++

en: C-Class Local Network
target: Jaringan Lokal Kelas-C

en: CUPS configuration
target: konfigurasi CUPS

en: CUPS does not support printers on Novell servers or printers sending the data into a free-formed command.
target: CUPS tak men-support printer server Novell atau printer yg mengirim data ke perintah format-bebas.

en: CUPS server IP
target: IP server CUPS

en: Cable connection
target: Konfigurasi jaringan kabel

en: Calendar
target: Kalender

en: Can't access kernel modules corresponding to your kernel (file %s is missing), this generally means your boot floppy in not in sync with the Installation medium (please create a newer boot floppy)
target: Gagal mengakses modul kernel yang cocok (file %s hilang), ini umumnya berarti bahwa disket boot Anda tak sinkron dengan  media instalasi (buatlah disket boot baru

en: Can't add a partition to _formatted_ RAID md%d
target: Tidak dapat menambah partisi ke RAID md%d yang terformat

en: Can't make screenshots before partitioning
target: Gagal membuat screenshot sebelum buat partisi

en: Can't open %s for writing: %s
target: error membuka file %s untuk ditulisi: %s

en: Can't open %s: %s
target: Tidak bisa buka %s: %s

en: Can't unset mount point as this partition is used for loop back.
    Remove the loopback first
target: Tak bisa unset mount point karena partisi ini sudah digunakan untuk
    loopback. Hapus dulu loopbacknya kalau mau begitu.

en: Can't use broadcast with no NIS domain
target: Tanpa domain NIS, broadcast tak dapat dipakai

en: Can't write file %s
target: Tidak bisa menulis ke file %s

en: Canada (cable)
target: Kanada (kabel)

en: Canadian (Quebec)
target: Kanada (Quebec)

en: Cancel
target: Batal

en: CapsLock key
target: Kunci CapsLock

en: Card IO
target: IO Card

en: Card IO_0
target: IO_0 card

en: Card IO_1
target: IO_1 card

en: Card IRQ
target: IRQ card

en: Card mem (DMA)
target: Mem card (DMA)

en: Cd-Rom labeled "%s"
target: Label CD-ROM "%s"

en: Change Cd-Rom
target: Ganti Cd-Rom

en: Change Graphic card
target: Ubah kartu grafis

en: Change Monitor
target: Ubah Monitor

en: Change Resolution
target: Ubah Resolusi

en: Change Server options
target: Ubah Parameter Server

en: Change partition type
target: Mengubah tipe partisi

en: Change the printing system
target: Ubah sistem cetak

en: Change type
target: Ubah tipe

en: Change your Cd-Rom!
    
    Please insert the Cd-Rom labelled "%s" in your drive and press Ok when done.
    If you don't have it, press Cancel to avoid installation from this Cd-Rom.
target: Ganti CDROM!
    
    Silakan masukkan CDROM berlabel "%s" di drive Anda dan tekan OK
    Kalau Anda tak punya CDROM ini, tekan Batal aja untuk membatalkan instalasi dari CD ini.

en: Check bad blocks?
target: Periksa bad blok?

en: Checking device and configuring HPOJ ...
target: Sedang mencek alat dan mengkonfigurasi HPOJ ...

en: Checking installed software...
target: Pemeriksaan perangkat lunak terinstal

en: China (bcast)
target: Cina (siaran)

en: Choose a X driver
target: Pilih driver X

en: Choose a X server
target: Pilih server X

en: Choose a file
target: Pilih file

en: Choose a mirror from which to get the packages
target: Pilih mirror tempat Anda ingin mengambil paket program

en: Choose a monitor
target: Pilih monitor

en: Choose a partition
target: Pilih partisi

en: Choose action
target: Pilih aksi

en: Choose an existing LVM to add to
target: Pilih LVM yang ada untuk ditambahkan ke

en: Choose an existing RAID to add to
target: Pilih RAID yang ada untuk ditambahkan ke

en: Choose another partition
target: Pilih partisi lain

en: Choose file
target: Pilih file

en: Choose options for server
target: Pilih opsi server

en: Choose packages to install
target: Paket yang akan diinstal

en: Choose security level
target: Pilih Tingkat Security

en: Choose the applications that will support the fonts :
target: Pilih aplikasi yang mensupport font :

en: Choose the connection you want to configure
target: Pilih koneksi yg hendak dikonfigurasi

en: Choose the default user:
target: Pilih user default:

en: Choose the floppy drive you want to use to make the bootdisk
target: Pilih drive floppy untuk membuat bootdisk

en: Choose the hard drive you want to erase in order to install your new
    Mandrake Linux partition. Be careful, all data present on it will be lost
    and will not be recoverable!
target: Pilih harddrive yg akan dihapus utk disediakan bagi partisi
    Linux Mandrake. Hati-hati, semua data di situ akan hilang dan
    tak dapat dikembalikan seperti semula!

en: Choose the mount points
target: Pilih lokasi mount

en: Choose the network interface
target: Pilih interface jaringan

en: Choose the new size
target: Pilih ukuran baru

en: Choose the packages you want to install
target: Pilih paket yang akan diinstal

en: Choose the partitions you want to format
target: Pilih partisi yang akan diformat

en: Choose the profile to configure
target: Pilih profil yang hendak Anda konfigurasikan

en: Choose the resolution and the color depth
target: Pilih resolusi dan kedalaman warna

en: Choose the sizes
target: Pilih ukurannya

en: Choose the tool you want to use
target: Pilih tool yang hendak digunakan

en: Choose the window manager to run:
target: Pilih manajer window yg akan dipakai:

en: Choose which services should be automatically started at boot time
target: Pilih service mana yang hendak dijalankan saat boot scr otomatis

en: Choose your country
target: Pilih negri Anda

en: Choose your filesystem encryption key
target: Pilih kunci sandi sistem file Anda

en: Choose your keyboard
target: Pilih keyboard

en: Choose your language
target: Pilih bahasa Anda

en: Chunk size %s
target: Ukuran chunk %s

en: Circular mounts %s
target: Mount melingkar %s

en: Clean /tmp at each boot
target: Hapus /tmp saat boot

en: Clear all
target: Hapus semua

en: Click here to launch the wizard ->
target: Klik di sini utk meluncurkan wizard ->

en: Click on "OK" if you want to delete all data and partitions present on
    this hard drive. Be careful, after clicking on "OK", you will not be able
    to recover any data and partitions present on this hard drive, including
    any Windows data.
    
    Click on "Cancel" to cancel this operation without losing any data and
    partitions present on this hard drive.
target: Klik "OK" bila Anda ingin menghapus semua data dan partisi yang ada di
    hard drive ini. Awas, setelah mengklik "OK" Anda tak dapat mengembalikan
    data dan partisi di drive ini termasuk data windows.
    
    Pilih "Batal" utk membatalkan aksi ini tanpa kehilangan data dan partisi
    yang ada dalam hard drive ini.

en: Clients for different protocols including ssh
target: Klien untuk berbagai protokol, termasuk ssh

en: Close
target: Tutup

en: Collapse Tree
target: Tutup Tree

en: Color depth: %s
target: Pilihan kedalaman warna: %s

en: Complete (%dMB)
target: Lengkap (%dMB)

en: Computing FAT filesystem bounds
target: Sedang menghitung bound filesystem fat

en: Computing Windows filesystem bounds
target: Sedang menghitung bound filesystem windows

en: Configuration
target: konfigurasi

en: Configuration complete.  May we write these changes to disk?
target: Konfigurasi tamat. Simpan perubahan ini ke disk?

en: Configuration of a remote printer
target: Konfigurasi printer remote

en: Configure
target: Konfigurasikan

en: Configure Internet Access...
target: Konfigurasi Akses Internet...

en: Configure Local Area Network...
target: Konfigurasi Local Area Network...

en: Configure X
target: Konfigurasi X

en: Configure all heads independently
target: Konfigurasikan semua head secara terpisah

en: Configure mouse
target: Konfigurasi mouse

en: Configure networking
target: Konfigurasi jaringan

en: Configure only card "%s" (%s)
target: Konfigurasi kartu "%s" (%s)

en: Configure services
target: Konfigurasi service

en: Configure the connection
target: Konfigurasikan koneksi

en: Configure the network now
target: Konfigurasikan jaringan sekarang

en: Configure the way the system will alert you
target: Konfigurasikan cara sistem memperingatkan Anda

en: Configuring IDE
target: konfigurasi IDE

en: Configuring PCMCIA cards...
target: Konfigurasikan card PCMCIA

en: Configuring applications...
target: Konfigurasi aplikasi...

en: Configuring network
target: Konfigureasi jaringan

en: Configuring network device %s
target: Konfigurasi perangkat jaringan %s

en: Configuring printer "%s" ...
target: Konfigurasi printer "%s" ...

en: Configuring scripts, installing software, starting servers...
target: Mengkonfigurasikan skrip, menginstall software, menjalankan server...

en: Configuring...
target: Konfigurasi...

en: Congratulations!
target: Selamat!

en: Congratulations, installation is complete.
    Remove the boot media and press return to reboot.
    
    
    For information on fixes which are available for this release of Mandrake Linux,
    consult the Errata available from:
    
    
    http://www.linux-mandrake.com/en/82errata.php3
    
    
    Information on configuring your system is available in the post
    install chapter of the Official Mandrake Linux User's Guide.
target: Selamat, instalasi selesai.
    Cabut media boot dan tekan Return/Enter untuk reboot.
    
    
    Untuk informasi perbaikan rilis Linux Mandrake ini,
    silakan lihat Errata di:
    
    
    http://www.linux-mandrake.com/en/82errata.php3
    
    
    Informasi untuk konfigurasi sistem juga tersedia di 
    bab Instalasi akhir di Buku Petunjuk Resmi Linux Mandrake.

en: Congratulations, the network and Internet configuration is finished.
    The configuration will now be applied to your system.
target: Selamat, jaringan dan internet telah dikonfigurasikan.
    
    Konfigurasi akan diterapkan di sistem Anda.

en: Connect
target: Tersambung

en: Connect to the Internet
target: Hubungan ke Internet

en: Connect...
target: Sambungkan...

en: Connected
target: Tersambung

en: Connection Configuration
target: Konfigurasi Koneksi

en: Connection name
target: Nama koneksi

en: Connection speed
target: Laju koneksi

en: Connection timeout (in sec)
target: Timeout koneksi (detik)

en: Connection type:
target: Tipe koneksi

en: Console Tools
target: Alat konsol

en: Contacting Mandrake Linux web site to get the list of available mirrors
target: Mandrake Linux sedang dihubungi untuk mengambil daftar mirror

en: Contacting the mirror to get the list of available packages
target: Saya sedang mencek mirror untuk mengambil daftar paket yang tersedia

en: Content of the file
target: Isi file

en: Continue
target: Lanjut

en: Continue anyway?
target: Jalan terus?

en: Control Center
target: Pusat Kontrol

en: Control and Shift keys simultaneously
target: Kunci Control dan Shift bersamaan

en: Copy fonts on your system
target: Salin font di sistem Anda

en: Copying %s
target: Salin %s

en: Create
target: Buat

en: Create a bootdisk
target: Membuat bootdisk

en: Create a new partition
target: Membuat partisi baru

en: Creating and formatting file %s
target: Membuat dan memformat file %s

en: Creating auto install floppy
target: Lagi buat disket auto install

en: Creating bootdisk
target: Membuat bootdisk

en: Croatian
target: Kroasia

en: Ctrl and Alt keys simultaneously
target: Kunci Ctrl dan Alt bersamaan

en: Current configuration of `%s':
    
    Network: %s
    IP address: %s
    IP attribution: %s
    Driver: %s
target: Konfigurasi `%s':
    
    Network: %s
    Alamat IP: %s
    Atribut IP: %s
    Driver: %s

en: Custom
target: Customized

en: Custom Restore
target: Simpan ulang pilihan sendiri

en: Custom disk partitioning
target: Lakukan partisi disk secara custom

en: Cylinder %d to %d
target: Silinder %d sampai %d

en: Czech (QWERTY)
target: Ceko (QWERTY)

en: Czech (QWERTZ)
target: Ceko (QWERTZ)

en: Czech Republic
target: Republik Ceko

en: DHCP Client
target: Klien DHCP

en: DHCP client
target: Klien DHCP

en: DNS server
target: Server DNS

en: DOS drive letter: %s (just a guess)
target: DOS letter: %s (hanya tebakan)

en: Danish
target: Denmark

en: Data list to include on CDROM.
target: Daftar data utk dimasukkan ke CDROM.

en: Database
target: Server, Database

en: Database Server
target: Server Database

en: Default printer
target: Printer standar

en: Del profile...
target: Hapus profil...

en: Delay before booting default image
target: Delay sebelum boot ke image default

en: Delete
target: Hapus

en: Description
target: Keterangan

en: Description:
    
      Drakbackup is used to backup your system.
      During the configuration you can select 
    	- System files, 
    	- Users files, 
    	- Other files.
    	or All your system ...  and Other (like Windows Partitions)
    
      Drakbackup allows you to backup your system on:
    	- Harddrive.
    	- NFS.
    	- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).
    	- FTP.
    	- Rsync.
    	- Webdav.
    	- Tape.
    
      Drakbackup allows you to restore your system to
      a user selected directory.
    
      Per default all backup will be stored on your
      /var/lib/drakbackup directory
    
      Configuration file:
    	/etc/drakconf/drakbackup/drakbakup.conf
    
    Restore Step:
      
      During the restore step, Drakbackup will remove
      your original directory and verify that all
      backup files are not corrupted. It is recommended
      you do a last backup before restoring.
target: Penjelasan:
    
      Drakbackup digunakan utk mem-backup sistem Anda.
      Saat konfigurasi Anda dapat memilih 
    	- File Sistem, 
    	- File User, 
    	- File Lain-lain.
    	atau Seluruh sistem ...  dan Lain-lain (mis. partisi Windows)
    
      Drakbackup dapat mem-backup sistem di:
    	- Harddrive.
    	- NFS.
    	- CDROM (CDRW), DVDROM (dg autoboot, rescue dan autoinstall.).
    	- FTP.
    	- Rsync.
    	- Webdav.
    	- Tape.
    
      Drakbackup dapat menyimpan ulang sistem Anda ke
      direktori pilihan user.
    
      Per default semua backup akan ditempatkan di
      direktori /var/lib/drakbackup
    
      File konfigurasi:
    	/etc/drakconf/drakbackup/drakbakup.conf
    
    Tahapan Restore:
      
      Saat tahap restore, Drakbackup akan menghapus
      directory asli dan mencek bahwa semua file backup
      tak rusak. Disarankan Anda melakukan backup
      terakhir sebelum menyimpan ulang.

en: Description:
    
      Drakbackup is used to backup your system.
      During the configuration you can select: 
    	- System files, 
    	- Users files, 
    	- Other files.
    	or All your system ...  and Other (like Windows Partitions)
    
      Drakbackup allows you to backup your system on:
    	- Harddrive.
    	- NFS.
    	- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).
    	- FTP.
    	- Rsync.
    	- Webdav.
    	- Tape.
    
      Drakbackup allows you to restore your system to
      a user selected directory.
    
      Per default all backup will be stored on your
      /var/lib/drakbackup directory
    
      Configuration file:
    	/etc/drakconf/drakbackup/drakbakup.conf
    
    
    Restore Step:
      
      During the restore step, DrakBackup will remove 
      your original directory and verify that all 
      backup files are not corrupted. It is recommended 
      you do a last backup before restoring.
target: Penjelasan:
    
      Drakbackup digunakan untuk membackup system Anda.
      Selama konfigurasi Anda dapat memilih: 
    	- File System, 
    	- File User, 
    	- File Lain-lain.
    	atau Seluruh sistem ...  dan Lain-lain (mis. partisi Windows)
    
      Drakbackup dapat melakukan backup system di:
    	- Harddrive.
    	- NFS.
    	- CDROM (CDRW), DVDROM (dg autoboot, rescue dan autoinstall.).
    	- FTP.
    	- Rsync.
    	- Webdav.
    	- Tape.
    
      Drakbackup dapat menyimpan ulang (restore) sistem Anda ke
      direktori pilihan user.
    
      Per default semua backup ditempatkan di direktori
      /var/lib/drakbackup
    
      File konfigurasi:
    	/etc/drakconf/drakbackup/drakbakup.conf
    
    
    Tahap Restore:
      
      Saat tahap restore, DrakBackup akan menghapus 
      direktori asli Anda dan mencek bahwa semua file 
      backup tak rusak. Disarankan Anda melakukan 
      backup sebelum menyimpan ulang.

en: Detailed information
target: Info detil

en: Details
target: Detil

en: Detected %s
target: Terdeteksi %s

en: Detecting devices ...
target: Pendeteksian alat...

en: Detecting devices...
target: Mendeteksi alat...

en: Dialing mode
target: mode dial

en: Dialup options
target: Parameter Dialup

en: Did it work properly?
target: Bekerja dg baik?

en: Directory %s already contain some data
    (%s)
target: Direktori %s telah berisi data
    (%s)

en: Disabling servers...
target: Server-server sedang dimatikan

en: Disconnect
target: Putus

en: Disconnect...
target: Koneksi diputus

en: DiskDrake failed to read correctly the partition table.
    Continue at your own risk!
target: DiskDrake gagal membaca tabel partisi Anda.
    Lanjutkan tapi resiko tanggung sendiri!

en: Do auto-detection
target: Lakukan deteksi otomatis

en: Do it!
target: Kerjakan!

en: Do new backup before restore (only for incremental backups.)
target: Lakukan backup baru sebelum simpan ulang (hanya utk backup incremental.)

en: Do not include critical files (passwd, group, fstab)
target: Tidak memasukkan file penting (passwd, group, fstab)

en: Do not include the browser cache
target: Jangan masukkan cache browser

en: Do not print any test page
target: Jangan cetak halaman tes

en: Do not transfer printers
target: Jangan transfer printer

en: Do you have an ISA sound card?
target: Anda punya kartu suara ISA?

en: Do you have another one?
target: Anda punya lagi?

en: Do you have any %s interfaces?
target: Punya %s interface?

en: Do you really want to leave the installation?
target: Anda ingin tinggalkan instalasi?

en: Do you really want to remove the printer "%s"?
target: Anda ingin menghapus printer "%s"?

en: Do you want the BackSpace to return Delete in console?
target: Ingin membuat tombol BackSpace menjadi Delete dalam konsol?

en: Do you want to allow incoming Secure Shell (ssh) connections? This
    is a telnet-replacement that you might use to login. If you're using
    telnet now, you should definitely switch to ssh. telnet is not
    encrypted -- so some attackers can steal your password if you use
    it. ssh is encrypted and doesn't allow for this eavesdropping.
target: Apakah Anda ingin membuka koneksi Secure Shell (ssh) ?
    SSH adalah pengganti telnet yang mungkin hendak Anda gunakan.
    Bila Anda hanya menggunakan telnet sekarang, silakan ganti ke ssh.
    telnet tidak dienkripsi loh -- jadi orang lain bisa mencuri katasandi Anda
    saat telnet. SSH dienkripsi dan tidak bisa disadap.

en: Do you want to allow incoming telnet connections?
    This is horribly unsafe, as we explained in the previous screen. We
    strongly recommend answering No here and using ssh in place of
    telnet.
target: Apakah Anda ingin membuka koneksi telnet?
    Tapi ini sangatlah tidak aman sebagaimana dijelaskan pada layar sebelumnya.
    Ayo deh jawab TIDAK dan gunakan SSH saja.

en: Do you want to click on this button?
target: Anda ingin meng-klik tombol ini?

en: Do you want to configure another printer?
target: Ingin konfigurasikan printer lain?

en: Do you want to save /etc/fstab modifications
target: Ingin simpan modifikasi /etc/fstab

en: Do you want to set this printer ("%s")
    as the default printer?
target: Ingin menset printer ini ("%s")
    sbg printer standar?

en: Do you want to start the connection at boot?
target: Anda mau jalankan koneksi ini saat boot?

en: Do you want to test the configuration?
target: Anda ingin tes konfigurasi ini?

en: Do you want to try to connect to the Internet now?
target: Anda ingin tes koneksi Internet sekarang?

en: Do you want to use aboot?
target: Ingin pakai aboot?

en: Documentation
target: Dokumentasi

en: Domain Name and Network Information Server
target: Nama Domain dan Server Info Network (NIS)

en: Domain name
target: Nama domain

en: Don't Save
target: Jangan Simpan

en: Done
target: Selesai

en: DrakX generally detects the number of buttons your mouse has. If not, it
    assumes you have a two-button mouse and will set it up for third-button
    emulation. DrakX will automatically know whether it is a PS/2, serial or
    USB mouse.
    
    If you wish to specify a different type of mouse select the appropriate
    type from the provided list.
    
    If you choose a mouse other than the default, a test screen will be
    displayed. Use the buttons and wheel to verify that the settings are
    correct. If the mouse is not working well, press the space bar or [Return]
    to "Cancel" and choose again.
target: Secara standar DrakX berasumsi mouse Anda bertombol dua dan akan menset-up
    emulasi 3-tombol. DrakX otomatis tahu itu mouse PS/2, serial atau USB.
    
    Jika Anda ingin menunjuk tipe mouse lain, pilih tipe yg sesuai dari daftar
    yang disediakan.
    
    Jika Anda memilih mouse bukan standar, Anda akan dihadapkan pada layar tes
    mouse. Gunakan tombol dan roda untuk verifikasi setting. Jika mouse tak
    bekerja baik tekan spasi atau RETURN untuk "Batal" dan pilih lagi.

en: DrakX now detects any IDE device present in your computer. It will also
    scan for one or more PCI SCSI card(s) on your system. If a SCSI card is
    found, DrakX will automatically install the appropriate driver.
    
    Because hardware detection does not always detect a piece of hardware,
    DrakX will ask you to confirm if a PCI SCSI card is present. Click "Yes"
    if you know that there is a SCSI card installed in your machine. You will
    be presented a list of SCSI cards to choose from. Click "No" if you have
    no SCSI hardware. If you are unsure, you can check the list of hardware
    detected in your machine by selecting "See hardware info" and clicking
    "OK". Examine the list of hardware and then click on the "OK" button to
    return to the SCSI interface question.
    
    If you have to manually specify your adapter, DrakX will ask if you want to
    specify options for it. You should allow DrakX to probe the hardware for
    the card-specific options which the hardware needs to initialize. This
    usually works well.
    
    If DrakX is not able to probe for the options which need to be passed, you
    will need to provide options to the driver manually. Please review the
    ``User Guide'' (chapter 3, in the ``Collecting Information on Your
    Hardware'' section) for hints on retrieving the parameters required from
    hardware documentation, from the manufacturer's web site (if you have
    Internet access) or from MicrosoftWindows (if you used this hardware with
    Windows on your system).
target: DrakX sedang mendeteksi perangkat IDE komputer Anda, juga men-scan kartu
    SCSI PCI di sistem Anda. Jika kartu SCSI ditemukan DrakX akan otomatis
    meng-instal driver yang sesuai.
    
    Karena perangkat keras terkadang tak terdeteksi, DrakX akan bertanya apakah
    ada kartu SCSI PCI. Klik "Ya" jika Anda tahu ada kartu SCSI terinstal di
    mesin Anda. Akan disajikan list kartu SCSI utk dipilih. Klik "Tidak" jika
    tak ada hardware SCSI. Jika Anda tak yakin, periksa daftar perangkat keras
    yang terdeteksi di mesin Anda dg memilih "Lihat info hardware" lalu klik
    "OK". Periksa daftar hardware lalu klik "OK" utk kembali.
    
    Jika Anda harus menunjuk adaptor secara manual, DrakX akan bertanya apakah
    Anda ingin menunjuk opsi untuknya. Anda harus mengizinkan DrakX mem-probe
    hardware utk opsi spesifik-kartu yg diperlukan hardware utk inisiasi. Ini
    biasanya bekerja baik.
    
    Jika DrakX gagal mem-probe opsi yang harus diberikan, Anda perlu memberikan
    opsi ke driver secara manual. Baca ``User Guide'' (bab 3, bag. "Collecting
    information on your hardware") utk trik mendapat parameter yg dibutuhkan
    dari dokumentasi hardware, website pabrik (jika Anda punya akses Internet)
    atau wicrosoft mindows (jika Anda memakai hardware ini di windows).

en: DrakX now needs to know if you want to perform a default ("Recommended")
    installation or if you want to have greater control ("Expert"). You can
    also choose to do a new install or an upgrade of an existing Mandrake Linux
    system:
    
     * "Install": completely wipes out the old system. In fact, depending on
    what currently holds your machine, you will be able to keep some old (Linux
    or other) partitions unchanged;
    
     * "Upgrade": this installation class allows to simply update the packages
    currently installed on your Mandrake Linux system. It keeps the current
    partitions of your hard drives as well as user configurations. All other
    configuration steps remain available with respect to plain installation;
    
     * "Upgrade Packages Only": this brand new class allows to upgrade an
    existing Mandrake Linux system while keeping all system configurations
    unchanged. Adding new packages to the current installation is also
    possible.
    
    Upgrades should work fine for Mandrake Linux systems starting from "8.1"
    release.
    
    Depending on your knowledge of GNU/Linux, select one of the following
    choices:
    
     * Recommended: choose this if you have never installed a GNU/Linux
    operating system. The installation will be very easy and you will only be
    asked a few questions;
    
     * Expert: if you have a good knowledge of GNU/Linux, you can choose this
    installation class. The expert installation will allow you to perform a
    highly-customized installation. Answering some of the questions can be
    difficult if you do not have a good knowledge of GNU/Linux, so do not
    choose this unless you know what you are doing.
target: DrakX kini perlu tahu Anda ingin instalasi standar ("Disarankan") atau
    ingin punya kontrol lebih besar ("Ahli"). Anda juga punya pilihan utk
    melakukan instalasi baru atau upgrade sistem Mandrake Linux yg ada:
    
     * "Instal" Hapus total sistem lama. Tergantung isi mesin Anda saat ini,
    Anda dapat mempertahankan partisi lama (Linux atau lainnya).
    
     * "Upgrade" Kelas instalasi ini memungkinkan update paket yang terinstal
    di sistem Mandrake Linux Anda. Partisi dan konfigurasi user yang ada tetap
    dipertahankan. Semua tahapan konfigurasi lain tetap ada seperti layaknya
    instalasi biasa.
    
     * "Upgrade Paket Saja" Kelas instalasi baru yang memungkinkan upgrade
    sistem Mandrake Linux tanpa mengubah konfigurasi sistem. Penambahan paket
    juga dimungkinkan.
    
    Upgrade dapat dilakukan terhadap sistem Mandrake Linux mulai versi "8.1".
    
    Pilihlah opsi berikut sesuai pengetahuan Anda ttg GNU/Linux:
    
     * Disarankan: pilih ini bila Anda belum pernah menginstal OS GNU/Linux.
    Proses instalasi amat mudah dan Anda hanya ditanya sedikit pertanyaan.
    
     * Ahli: Anda dapat memiilih kelas instalasi ini jika tahu banyak tentang
    GNU/Linux. Instalasi ahli memungkinkan Anda melakukan instalasi bebas.
    Bbrp pertanyaan sulit dijawab jika Anda tak berpengetahuan kuat tentang
    GNU/Linux. Jangan pilih kelas ini kecuali Anda tahu apa yang Anda lakukan.

en: Drakbackup Configuration
target: Konfigurasi Drakbackup

en: Duplicate mount point %s
target: Lokasi mount %s ada dua

en: Dutch
target: Belanda

en: Dvorak (Norwegian)
target: Dvorak (Norwegia)

en: Dvorak (Swedish)
target: Dvorak (Swedia)

en: East Europe
target: Eropa Timur

en: Editors, shells, file tools, terminals
target: Editor, shell, tool untuk file, terminal

en: Either the server name or the server's IP must be given!
target: Harus ada nama/IP server!

en: Empty
target: Kosong

en: Empty label not allowed
target: Label tidak boleh kosong

en: Emulate third button?
target: Emulasikan tombol ketiga?

en: Enable CD Boot?
target: Aktifkan boot dari CD?

en: Enable OF Boot?
target: Aktifkan boot dari OF?

en: Enable multi profiles
target: Buat multi profil

en: Enabling servers...
target: Server-server akan dinyalakan

en: Encryption key
target: Kunci sandi

en: Encryption key (again)
target: Kunci sandi (lagi)

en: Enter a printer device URI
target: Masukkan URI device printer

en: Enter a user
    %s
target: Masukkan user
    %s

en: Entering step `%s'
target: Memulai langkah `%s'

en: Entries you'll have to fill:
    %s
target: Entri yang harus Anda penuhi:
    %s

en: Erase entire disk
target: Hapus seluruh disk

en: Error
target: Ada Kesalahan

en: Error durind sending file via FTP.
     Please correct your FTP configuration.
target: Error saat pengiriman file via FTP.
     Betulkan konfigurasi FTP Anda.

en: Error durind sendmail
      your report mail was not sent
      Please configure sendmail
target: Error saat sendmail
      surat laporan Anda tak terkirim
      Mohon konfigurasikan sendmail

en: Error installing aboot, 
    try to force installation even if that destroys the first partition?
target: Ada error saat install aboot,
    paksakan instalasi walau merusak partisi awal?

en: Error opening %s for writing: %s
target: error membuka file %s untuk ditulisi: %s

en: Error reading file %s
target: Error saat membaca file %s

en: Error writing to file %s
target: Error pada saat menulis file %s

en: Error!
target: Ada Kesalahan

en: Estimating
target: Perkiraan

en: Estonian
target: Estonia

en: Ethernet Card
target: Card Ethernet

en: Europe protocol
target: Protokol Eropa

en: Europe protocol (EDSS1)
target: Protokol Eropa (EDSS1)

en: Every printer needs a name (for example "printer"). The Description and Location fields do not need to be filled in. They are comments for the users.
target: Tiap printer perlu nama (misalnya "printer"). Kolom Penjelasan / Lokasi tak harus terisi. Itu komentar utk user.

en: Everything has been configured.
    You may now share Internet connection with other computers on your Local Area Network, using automatic network configuration (DHCP).
target: Semuanya sudah dikonfigurasikan.
    Anda sekarang bisa membagi koneksi Internet dengan komputer-komputer lain pada Local Area Network di tempat Anda, dengan menggunakan konfigurasi jaringan otomatis (DHCP).

en: Exit
target: Keluar

en: Exit install
target: Keluar dari proses instal

en: Expand Tree
target: Buka Tree

en: Expert
target: Ahli

en: Expert Mode
target: Mode Ahli

en: Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz
target: Extended Super VGA, 800x600 pada 60 Hz, 640x480 pada 72 Hz

en: Extended partition not supported on this platform
target: Partisi extended tak bisa dipakai di platform ini

en: External ISDN modem
target: Modem ISDN external

en: FAT resizing failed: %s
target: Resize FAT gagal: %s

en: FTP Connection
target: Koneksi FTP

en: FTP proxy
target: Proxy FTP

en: Failed to add the printer "%s" to Star Office/OpenOffice.org.
target: Gagal menambahkan printer "%s" ke Star Office/OpenOffice.org.

en: Failed to remove the printer "%s" from Star Office/OpenOffice.org.
target: Gagal menghapus printer "%s" dari Star Office/OpenOffice.org.

en: Failure installing the needed packages : %s and Bastille.
     Try to install them manually.
target: Gagal menginstal paket kebutuhan : %s dan Bastille.
     Coba instal secara manual.

en: File Selection
target: Pilihan File

en: File already exists. Use it?
target: File sudah ada. Gunakan file ini ?

en: File already used by another loopback, choose another one
target: File sudah digunakan loopback yang lain, pilih yang lainnya dong

en: File sharing
target: Pemakaian file bersama

en: Filesystem encryption key
target: Kunci sandi sistem file

en: Filesystem type:
target: Tipe filesystem:

en: Filesystem types:
target: Tipe filesystem:

en: Finally, depending on whether or not you selected individual packages, you
    will be presented a tree containing all packages classified by groups and
    subgroups. While browsing the tree, you can select entire groups,
    subgroups, or individual packages.
    
    Whenever you select a package on the tree, a description appears on the
    right. When your selection is finished, click the "Install" button which
    will then launch the installation process. Depending on the speed of your
    hardware and the number of packages that need to be installed, it may take
    a while to complete the process. An estimate of the time it will take to
    install everything is displayed on the screen, to help you gauge if there
    is sufficient time to enjoy a cup of coffee.
    
    !! If a server package has been selected, either intentionally or because
    it was part of a whole group, you will be asked to confirm that you really
    want those servers to be installed. Under Mandrake Linux, any installed
    servers are started by default at boot time. Even if they are safe and have
    no known issues at the time the distribution was shipped, it may happen
    that security holes are discovered after this version of Mandrake Linux was
    finalized. If you do not know what a particular service is supposed to do
    or why it is being installed, then click "No". Clicking "Yes" will
    install the listed services and they will be started automatically by
    default. !!
    
    The "Automatic dependencies" option simply disables the warning dialog
    which appears whenever the installer automatically selects a package. This
    occurs because it has determined that it needs to satisfy a dependency with
    another package in order to successfully complete the installation.
    
    The tiny floppy disk icon at the bottom of the list allows to load the
    package list chosen during a previous installation. Clicking on this icon
    will ask you to insert a floppy disk previously created at the end of
    another installation. See the second tip of last step on how to create such
    a floppy.
target: Akhirnya, tergantung apakah Anda memilih paket sendiri atau tidak, Anda
    akan diberi pohon berisi paket terkelompok dg grup/subgrup. Sambil meneliti
    pohon, Anda dapat memilih semua grup, subgrup, atau paket tersendiri.
    
    Tiap kali Anda memilih paket di pohon, penjelasan muncul di sisi kanan.
    Bila seleksi Anda selesai, klik tombol "Instal" utk memulai instalasi.
    Tergantung kecepatan hardware dan jumlah paket yg diinstal, mungkin
    dibutuhkan bbrp saat utk instalasi. Perkiraan waktu instalasi ditampilkan
    di layar utk membantu Anda memperkirakan waktu menikmati secangkir kopi.
    
    !! Jika paket server terpilih dg sengaja atau karena merupakan bagian suatu
    grup besar, akan ada pertanyaan konfirmasi instalasi paket tersebut. Pada
    Mandrake Linux, secara default semua server terinstal dijalankan saat boot.
    Meski aman saat distribusi diluncurkan, ada kemungkinan lubang keamanan
    ditemukan setelah versi Mandrake Linux ini rampung. Jika Anda tak tahu apa
    yg dilakukan oleh suatu servis atau mengapa ia diinstal, klik "Tidak".
    Jika Anda menekan "Ya" servis terdaftar akan diinstal dan secara standar
    akan dijalankan secara otomatis. !!
    
    Opsi "Ketergantungan otomatis" mematikan dialog yg muncul tiap kali
    instalator memilih suatu paket scr otomatis. Ini terjadi karena
    ketergantungan harus dipenuhi dg paket lain agar instalasi sukses.
    
    Ikon disket di dasar list memungkinkan pemuatan daftar paket ter-instal pd
    instalasi sebelumnya. Jika diklik, Anda akan diminta memasukkan disket yg
    dibuat pd akhir instalasi yg lalu. Lihat tip kedua di step terakhir utk
    membuat floppy tersebut.

en: Finally, you will be asked whether you want to see the graphical interface
    at boot. Note this question will be asked even if you chose not to test the
    configuration. Obviously, you want to answer "No" if your machine is to
    act as a server, or if you were not successful in getting the display
    configured.
target: Akhirnya, Anda akan ditanya apakah Anda ingin punya antarmuka grafis saat
    boot. Pertanyaan ini diajukan meski Anda memilih tidak mentes konfigurasi.
    Jelas, Anda ingin menjawab "Tidak" jika mesin Anda dijadikan server, atau
    jika Anda gagal mengkonfigurasi display.

en: Finding packages to upgrade
target: Mencari paket untuk diupgrade

en: Finish
target: Selesai

en: Finnish
target: Finland

en: Firewall Configuration Wizard
target: Dukun Konfigurasi Firewall

en: Firewall/Router
target: Server, Firewall/Router

en: Firewalling
    
    Click on Configure to set up a standard firewall
target: Firewall
    
    Silakan tekan Konfigurasikan untuk mensetup firewall standar

en: Firewalling
    
    You already have set up a firewall.
    Click on Configure to change or remove the firewall
target: Firewall
    
    Anda sudah ada firewall.
    Silakan tekan Konfigurasikan untuk mengganti atau menghapus firewall

en: Firewalling Configuration
target: konfigurasi firewall

en: Firewalling configuration
target: konfigurasi firewall

en: Firewalling configuration detected!
target: Konfigurasi firewall terdeteksi!

en: First DNS Server (optional)
target: Server DNS Primary (boleh diisi/tidak)

en: First floppy drive
target: Drive Disket Pertama

en: First sector of boot partition
target: Sektor pertama di partisi boot

en: First sector of drive (MBR)
target: Sektor pertama di drive (MBR)

en: Font List
target: Daftaf Font

en: Fonts Importation
target: Impor Font

en: Fonts conversion
target: Konversi font

en: Fonts copy
target: Copy font

en: For Security reason, it will be disconnected now.
target: Untuk alasan keamanan, sekarang akan diputus koneksinya

en: For all of your IT projects, our consultants are ready to analyze your requirements and offer a customized solution. Benefit from MandrakeSoft's vast experience as a Linux producer to provide a true IT alternative for your business organization
target: Untuk semua proyek IT, konsultan kami siap menganalisa kebutuhan Anda dan menyediakan solusi pilihan. Hasil pengalaman total MandrakeSoft sebagai produser Linux menyediakan Teknologi Informasi sesungguhnya untuk organisasi bisnis Anda

en: For more information on MandrakeSoft's Professional Services and commercial offerings, please see the following web page:
target: Untuk info lebih lanjut tentang Servis Profesional MandrakeSoft dan sajian komersial, lihat halaman web berikut:

en: Format partitions
target: Melakukan format partisi

en: Formatted
target: Telah diformat

en: Formatting
target: Sedang memformat

en: Formatting loopback file %s
target: Sekarang sedang memformat file loopback %s

en: Formatting partition %s
target: Melakukan format partisi %s

en: Formatting partitions
target: Melakukan format partisi

en: Found %s %s interfaces
target: Ketemu interface %s %s

en: France
target: Perancis

en: French
target: Perancis

en: GNU/Linux is a multiuser system, and this means that each user can have his
    own preferences, his own files and so on. You can read the ``User Guide''
    to learn more. But unlike "root", which is the administrator, the users
    you will add here will not be entitled to change anything except their own
    files and their own configuration. You will have to create at least one
    regular user for yourself. That account is where you should log in for
    routine use. Although it is very practical to log in as "root" everyday,
    it may also be very dangerous! The slightest mistake could mean that your
    system would not work any more. If you make a serious mistake as a regular
    user, you may only lose some information, but not the entire system.
    
    First, you have to enter your real name. This is not mandatory, of course
    as you can actually enter whatever you want. DrakX will then take the first
    word you have entered in the box and will bring it over to the "User
    name". This is the name this particular user will use to log onto the
    system. You can change it. You then have to enter a password here. A
    non-privileged (regular) user's password is not as crucial as "root"' one
    from a security point of view, but that is no reason to neglect it: after
    all, your files are at risk.
    
    If you click on "Accept user", you can then add as many as you want. Add
    a user for each one of your friends: your father or your sister, for
    example. When you finish adding all the users you want, select "Done".
    
    Clicking the "Advanced" button allows you to change the default "shell"
    for that user (bash by default).
target: GNU/Linux adalah sistem multiuser, artinya tiap user bisa punya kesukaan,
    file dll sendiri. Anda bisa membaca ``User Guide'' utk belajar lebih dalam.
    Tapi tak seperti "root", sang administrator, user di sini tak berhak
    mengubah apapun kecuali konfigurasi dan file mereka sendiri. Anda harus
    membuat setidaknya satu user reguler utk Anda sendiri. Account ini Anda
    pakai utk rutinitas. Meski Anda dapat login sbg "root" tiap hari, tapi
    itu amat berbahaya! Kesalahan terkecil dapat menyebabkan sistem Anda tak
    bekerja selamanya. Meski Anda melakukan kesalahan serius sbg user normal,
    Anda hanya akan kehilangan sebagian informasi, tidak seluruh sistem.
    
    Pertama, Anda harus mengisi nama. Ini tidak wajib, tentu saja - Anda dapat
    mengisinya sesuka Anda. DrakX akan mengambil kata pertama yg anda masukkan
    di kotak sbg "Nama user". Ini adalah nama user yg dipakai utk login ke
    sistem. Anda bisa mengubahnya. Lalu Anda harus mengisi katasandi. Katasandi
    user non-privileged (reguler) tak sepenting katasandi "root" dari segi
    keamanan, tapi tak ada alasan utk mengabaikannya - file Anda bisa beresiko.
    
    Klik "Buat user", selanjutnya Anda dapat menambahkan user sebanyak Anda
    mau. Misalnya, tambahkan user utk teman, ayah, atau saudara Anda. Bila Anda
    selesai menambahkan semua user, pilih "Selesai".
    
    Klik "Tambahan" memungkinkan Anda mengubah "shell" standar utk user
    terkait (standar: bash).

en: GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in
    local time according to the time zone you selected. It is however possible
    to deactivate this by deselecting "Hardware clock set to GMT" so that the
    hardware clock is the same as the system clock. This is useful when the
    machine is hosting another operating system like Windows.
    
    The "Automatic time synchronization" option will automatically regulate
    the clock by connecting to a remote time server on the Internet. In the
    list that is presented, choose a server located near you. Of course you
    must have a working Internet connection for this feature to work. It will
    actually install on your machine a time server which can be optionally used
    by other machines on your local network.
target: GNU/Linux mengatur waktu dlm GMT (Greenwich Mean Time) dan menerjemahkannya
    ke waktu lokal tergantung zona waktu yang Anda pilih. Dapat di-nonaktifkan
    dengan melepas tanda "Jam hardware diset ke GMT" sehingga jam hardware
    sama dengan jam sistem. Berguna bila mesin didiami OS lain seperti Mindows.
    
    Opsi "Sinkronisasi waktu otomatis" akan otomatis mengatur jam dengan
    menghubungi server waktu remote di internet. Pilihlah server terdekat saat
    daftar muncul. Tentu saja Anda harus punya koneksi internet agar fitur ini
    berfungsi. Server waktu akan diinstalkan di mesin Anda dan dapat dipakai
    oleh mesin lain di jaringan lokal Anda.

en: GPM adds mouse support to text-based Linux applications such the
    Midnight Commander. It also allows mouse-based console cut-and-paste operations,
    and includes support for pop-up menus on the console.
target: GPM memberikan akses ke mouse pada aplikasi Linux yang text based semacam
    Midnight Commander. Dia juga bisa bikin cut-and-paste dengan mouse pada konsol
    dan juga bikin menu pop-up di konsol.

en: Game station
target: Komputer Game

en: Games
target: Game

en: Gateway (e.g. %s)
target: Gateway (mis. %s)

en: Gateway device
target: Device Gateway

en: Generate auto install floppy
target: Buat floppy instalasi otomatis

en: Generic
target: Generik

en: Generic 2 Button Mouse
target: Mouse Generik 2 Tombol

en: Generic 3 Button Mouse
target: Mouse Generik 3 Tombol

en: Generic PS2 Wheel Mouse
target: Mouse PS2 wheel generik

en: Generic Printers
target: Printer Generik

en: Geometry: %s cylinders, %s heads, %s sectors
target: Ukuran: %s silinber, %s head, %s sektor

en: Georgian ("Latin" layout)
target: Georgia (layout "Latin")

en: Georgian ("Russian" layout)
target: Georgia (layout "Rusia")

en: German
target: Jerman

en: German (no dead keys)
target: Jerman (tanpa dead key)

en: Germany
target: Jerman

en: Get Windows Fonts
target: Ambil Font Windows

en: Get to know the Open Source community and become a member. Learn, teach, and help others by joining the many discussion forums that you will find in our "Community" webpages
target: Cari tahu tentang komunitas Sumber Bebas dan jadi anggota. Belajar, ajari, dan bantulah sesama dengan bergabung dalam banyak forum diskusi di halaman web "Komunitas" kami

en: Ghostscript referencing
target: referensi Ghostscript

en: Give a file name
target: Berikan nama file

en: Give the ram size in MB
target: Berikan jumlah RAM dalam satuan MB

en: Gnome Workstation
target: Workstation Gnome

en: Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc
target: Gnome, Icewm, Window Maker, Enlightenment, Fvwm, dsb

en: Go on anyway?
target: Cuek aja?

en: Go on without configuring the network
target: Jalan tanpa konfigurasi jaringan

en: Graphic card
target: Kartu grafis

en: Graphic card identification: %s
target: Identifikasi kartu grafis: %s

en: Graphic card not configured yet
target: Kartu grafis belum dikonfigurasi

en: Graphic card: %s
target: Kartu grafis: %s

en: Graphic card: %s
target: Kartu grafis: %s

en: Graphic memory: %s kB
target: Memori grafis: %s KB

en: Graphical Environment
target: Mode Grafis

en: Graphics programs such as The Gimp
target: Program Grafis, misalnya The Gimp

en: Greece
target: Yunani

en: Greek
target: Yunani

en: HTTP proxy
target: Proxy HTTP

en: Hard Disk Backup Progress...
target: Kemajuan Backup Hard Disk...

en: Hard Disk Backup files...
target: File Backup Hard Disk...

en: Hard drive detection
target: Deteksi hard disk

en: Hard drive information
target: Info hard drive

en: HardDrake runs a hardware probe, and optionally configures
    new/changed hardware.
target: HardDrake mendeteksi hardware, dan mengkonfigurasi yg baru/berubah bila perlu.

en: Hardware clock set to GMT
target: Jam hardware diset ke GMT

en: Help
target: Pertolongan

en: Here are presented various parameters concerning your machine. Depending on
    your installed hardware, you may or not, see the following entries:
    
     * "Mouse": check the current mouse configuration and click on the button
    to change it if necessary;
    
     * "Keyboard": check the current keyboard map configuration and click on
    the button to change that if necessary;
    
     * "Timezone": DrakX, by default, guesses your time zone from the language
    you have chosen. But here again, as for the choice of a keyboard, you may
    not be in the country for which the chosen language should correspond.
    Hence, you may need to click on the "Timezone" button in order to
    configure the clock according to the time zone you are in;
    
     * "Printer": clicking on the "No Printer" button will open the printer
    configuration wizard;
    
     * "Sound card": if a sound card is detected on your system, it is
    displayed here. No modification possible at installation time;
    
     * "TV card": if a TV card is detected on your system, it is displayed
    here. No modification possible at installation time;
    
     * "ISDN card": if an ISDN card is detected on your system, it is
    displayed here. You can click on the button to change the parameters
    associated with it.
target: Di sini disajikan macam-macam parameter mesin Anda. Tergantung hardware yg
    ter-instal, Anda dapat - atau tidak, melihat entri berikut:
    
     * "Mouse": cek konfigurasi mouse, klik tombol utk mengubahnya bila perlu
    
     * "Keyboard": cek konfigurasi map keyboard, klik tombol utk mengubahnya
    bila perlu.
    
     * "Zona waktu": DrakX menerka zona waktu Anda dari bahasa yg Anda pilih.
    Tapi sekali lagi seperti pilihan keyboard, Anda mungkin tak berada di negri
    yang selaras dg bahasa terpilih. Jadi Anda mungkin perlu menekan tombol
    "Zona waktu" utk mengkonfigurasikan jam sesuai zona waktu tempat Anda.
    
     * "Printer": klik "No Printer" utk membuka dukun konfigurasi printer.
    
     * "Kartu suara": kartu suara terdeteksi di sistem Anda akan ditampilkan
    di sini. Tiada modifikasi yg dapat dilakukan saat instalasi.
    
     * "Kartu TV": kartu TV yg terdeteksi di sistem Anda akan ditampilkan di
    sini. Tiada modifikasi yg dapat dilakukan saat instalasi.
    
     * "Kartu ISDN": kartu ISDN yg terdeteksi di sistem Anda akan ditampilkan
    di sini. Anda dapat meng-klik tombol utk mengubah parameternya.

en: Here are the different entries.
    You can add some more or change the existing ones.
target: Ini adalah entri yang lain lagi.
    Anda boleh tambahkan atau mengubah yang sudah ada.

en: Here is a list of all auto-detected printers. Please choose the printer you want to set up or enter a device name/file name in the input line
target: Daftar printer terdeteksi otomatis. Pilihlah printer yang ingin diset up atau masukkan nama alat/file di baris masukan

en: Here is a list of all auto-detected printers. Please choose the printer you want to set up. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on "Manual configuration".
target: Daftar printer terdeteksi otomatis. Pilihlah printer yang ingin diset up. Konfigurasi printer akan bekerja otomatis. Jika printer Anda tak terdeteksi dengan benar atau jika ingin Anda konfigurasi sendiri, jalankan "Konfigurasi manual".

en: Here is a list of the available printing options for the current printer:
target: Daftar opsi cetak tersedia untuk printer ini:

en: Here is the full list of keyboards available
target: Ini adalah daftar keyboard yang tersedia

en: Here, we select a printing system for your computer. Other OSs may offer
    you one, but Mandrake Linux offers three.
    
     * "pdq" which means ``print, don't queue'', is the choice if you have a
    direct connection to your printer and you want to be able to panic out of
    printer jams, and you do not have networked printers. It will handle only
    very simple network cases and is somewhat slow for networks. Pick "pdq"
    if this is your maiden voyage to GNU/Linux. You can change your choices
    after installation by running PrinterDrake from the Mandrake Control Center
    and clicking the expert button.
    
     * "CUPS"``Common Unix Printing System'', is excellent at printing to your
    local printer and also halfway-around the planet. It is simple and can act
    as a server or a client for the ancient "lpd" printing system. Hence, it
    is compatible with the systems that went before. It can do many tricks, but
    the basic setup is almost as easy as "pdq". If you need this to emulate
    an "lpd" server, you must turn on the "cups-lpd" daemon. It has
    graphical front-ends for printing or choosing printer options.
    
     * "lprNG"``line printer daemon New Generation''. This system can do
    approximately the same things the others can do, but it will print to
    printers mounted on a Novell Network, because it supports the IPX protocol,
    and it can print directly to shell commands. If you have need of Novell or
    printing to commands without using a separate pipe construct, use lprNG.
    Otherwise, CUPS is preferable as it is simpler and better at working over
    networks.
target: Kini kita pilih sistem cetak komputer Anda. OS lain mungkin punya satu,
    Mandrake menyediakan tiga.
    
     * "pdq" - artinya ``print, djangan nqantri'', adalah pilihan jika Anda
    punya koneksi langsung ke printer Anda dan ingin bebas dari panik kemacetan
    printer, serta tak punya printer jaringan. Ia akan meng-handle hanya kasus
    jaringan yg amat mudah dan agak lambat utk network. Ambil "pdq" jika ini
    kali pertama Anda mengenal GNU/Linux. Anda dapat mengubah pilihan setelah
    instalasi dg menjalankan PrinterDrake dari Pusat Kontrol Mandrake dan
    meng-klik tombol expert/ahli.
    
     * "CUPS"``Sistem Cetak Unix Umum'' canggih untuk mencetak ke printer
    lokal dan juga separuh planet. Mudah dan berfungsi spt server/klien utk
    sistem cetak kuno "lpd" jadi kompatibel dg sistem lama. Banyak trik dapat
    dilakukan, tapi setup awalnya hampir semudah "pdq". Jika Anda perlu ini
    utk emulasi server "lpd", Anda harus menyalakan daemon "cups-lpd".
    Front-end grafis disediakan utk pencetakan/pemilihan opsi printer.
    
     * "lprNG"``daemon printer baris Generasi Baru''. Sistem ini dapat
    melakukan hal yg mirip dg yg bisa dilakukan sistem lain, hanya saja ia akan
    mencetak ke printer yang terhubung dengan network Novell, karena mensupport
    protokol IPX, dan bisa mencetak langsung ke perintah shell. Jika Anda perlu
    Novell atau mencetak ke perintah tanpa memakai konstruksi pipa terpisah,
    gunakan lprNG. Jika tidak, pilihlah CUPS sebab lebih mudah dan bekerja baik
    di network.

en: Hide files
target: Sembunyikan file

en: High
target: Kuat

en: High Frequency SVGA, 1024x768 at 70 Hz
target: High Frequency SVGA, 1024x768 pada 70 Hz

en: Higher
target: Lebih Kuat

en: Horizontal refresh rate
target: Laju refresh horisontal

en: Host name
target: Nama Host

en: Hostname:
target: Nama Host:

en: How is the printer connected?
target: Bagaimana printer ini disambung ke komputer?

en: Hungarian
target: Hungaria

en: I can keep your current configuration and assume you already set up a DHCP server; in that case please verify I correctly read the C-Class Network that you use for your local network; I will not reconfigure it and I will not touch your DHCP server configuration.
    
    Else, I can reconfigure your interface and (re)configure a DHCP server for you.
target: Konfigurasi Anda dapat dipakai dengan anggapan Anda telah menset up server DHCP; tolong periksa apakah Network Kelas-C jaringan lokal Anda terbaca dengan benar; Konfigurasi ulang takkan dilakukan dan konfigurasi server DHCP takkan disentuh.
    
    Atau, antarmuka dan server DHCP dapat dikonfigurasikan (lagi).

en: I can set up your computer to automatically log on one user.
    Do you want to use this feature?
target: Komputer Anda dapat diset agar secara otomatis login dg satu user.
    Anda ingin pakai feature ini?

en: I can set up your computer to automatically start X upon booting.
    Would you like X to start when you reboot?
target: Saya bisa bikin komputermu akan menjalankan X saat booting.
    Anda mau fasilitas ini ?

en: I can't add any more partition
target: Partisi tak dapat ditambah

en: I can't find any room for installing
target: Aduh, ruangannya tak cukup nih untuk menginstall

en: I can't find needed image file `%s'.
target: File image `%s' tak ditemukan.

en: I can't read your partition table, it's too corrupted for me :(
    I can try to go on blanking bad partitions (ALL DATA will be lost!).
    The other solution is to disallow DrakX to modify the partition table.
    (the error is %s)
    
    Do you agree to loose all the partitions?
target: Saya tak bisa baca tabel partisi, udah hancur lebur nih :(
    Aku akan coba hapus partisi yg jeleknya (SEMUA DATA akan HILANG).
    Solusi lainnya adalah jangan biarkan saya memodifikasi tabel partisi.
    (pesan errornya adalah %s)
    
    Anda setuju untuk menghapus semua partisi?

en: I can't read your partition table, it's too corrupted for me :(
    I'll try to go on blanking bad partitions
target: Saya tak bisa baca tabel partisi, udah hancur lebur nih :(
    Aku akan coba hapus partisi yg jeleknya

en: I don't know
target: Saya tak tahu

en: I don't know how to format %s in type %s
target: tidak bisa melakukan format %s dengan tipe %s

en: I have detected an ISDN PCI Card, but I don't know the type. Please select one PCI card on the next screen.
target: Saya mendeteksi adanya sebuah card ISDN PCI, tapi saya tidak tahu tipenya. Silakan pilih card PCI tersebut pada layar berikutnya.

en: IP address
target: Alamat IP

en: IP address should be in format 1.2.3.4
target: Alamat IP harus dalam format 1.2.3.4

en: ISDN Configuration
target: konfigurasi ISDN

en: ISDN card
target: kartu ISDN

en: ISDN connection
target: Konfigurasi koneksi ISDN

en: Icelandic
target: Islandia

en: Icewm, Window Maker, Enlightenment, Fvwm, etc
target: Icewm, Window Maker, Enlightenment, Fvwm, dsb

en: Icon
target: Ikon

en: If you have all the CDs in the list below, click Ok.
    If you have none of those CDs, click Cancel.
    If only some CDs are missing, unselect them, then click Ok.
target: Kalau Anda punya semua CD pada daftar di bawah, tekan OK.
    Kalau tak punya sama sekali, click Cancel.
    Kalau cuma punya beberapa aja, pilih aja, trus klik Ok.

en: If you plan to use aboot, be carefull to leave a free space (2048 sectors is enough)
    at the beginning of the disk
target: Jika Anda ingin pakai aboot, sisakan ruang (cukup 2048 sektor) di awal disk

en: If you wish to install less than this size,
    select the percentage of packages that you want to install.
    
    A low percentage will install only the most important packages;
    a percentage of 100%% will install all selected packages.
target: Kalau Anda mau nginstall dengan ukuran yang lebih kecil dari ini,
    pilih dulu persentase paket yang hendak diinstall.
    
    Persentasi kecil berarti akan install paket yang penting-penting saja;
    dan sebaliknya persentase 100%% akan install semua paket yang tadi sudah
    dipilih

en: If your printer is not listed, choose a compatible (see printer manual) or a similar one.
target: Jika printer Anda tak terdaftar, pilih yang kompatibel (lihat manual) atau yang mirip.

en: Importance: %s
target: Derajat: %s

en: In addition, queues not created with this program or "foomatic-configure" cannot be transferred.
target: Antrian tak dibuat oleh program ini atau "foomatic-configure" tak dapat ditransfer.

en: In some cases, the %s driver needs to have extra information to work
    properly, although it normally works fine without. Would you like to specify
    extra options for it or allow the driver to probe your machine for the
    information it needs? Occasionally, probing will hang a computer, but it should
    not cause any damage.
target: Kadangkala, driver %s butuh informasi tambahan agar dapat bekerja normal
    walaupun kadangkala juga ini tidak perlu. Nah, apakah Anda ingin untuk
    memberikan parameter tambahan tadi atau biarkan saja drivernya melakukan
    deteksi sendiri parameternya? Biasanya, autodetek akan membuat kompputer
    jadi hengki (baca: hang), tapi biasanya sih tak ngerusak hardwarenya.

en: Individual package selection
target: Pilih paket sendiri

en: Init Message
target: Pesan Init

en: Initials tests
target: Tes Awal

en: Insert a FAT formatted floppy in drive %s
target: Masukkan disket yang sudah diformat dengan tipe FAT di drive %s

en: Insert a blank floppy in drive %s
target: Masukkan disket kosong di drive %s

en: Insert a floppy containing package selection
target: Masukkan disket yg berisi seleksi paket

en: Insert a floppy in %s
target: Masukkan disket di %s

en: Insert a floppy in drive
    All data on this floppy will be lost
target: Masukkan disket ke drive
    semua data di disket ini akan hilang

en: Install
target: Instal

en: Install & convert Fonts
target: Instal & konversikan Font

en: Install Class
target: Kelas Instal

en: Install List
target: Daftar Instalasi

en: Install system
target: Instal sistem

en: Install system updates
target: Instal update sistem

en: Install/Update
target: Instal/Update

en: Installation of %s failed. The following error occured:
target: Instalasi %s gagal. Ada kesalahan berikut:

en: Installation of bootloader failed. The following error occured:
target: Instalasi bootloader gagal. Ada kesalahan berikut:

en: Installing
target: Instalasi

en: Installing Foomatic ...
target: Instalasi Foomatic ...

en: Installing HPOJ package...
target: Instalasi paket HPOJ...

en: Installing SANE package...
target: Instalasi paket SANE...

en: Installing a printing system in the %s security level
target: Instalasi sistem cetak dalam level keamanan %s

en: Installing bootloader
target: Instalasi bootloader

en: Installing driver for %s card %s
target: Menginstall driver untuk card %s %s

en: Installing package %s
target: Sedang instal paket %s

en: Installing package %s
    %d%%
target: Sedang instal paket %s
    %d%%

en: Installing packages...
target: Instalasi paket...

en: Interface %s
target: Antarmuka %s

en: Interface %s (using module %s)
target: Interface %s (pakai module %s)

en: Internal ISDN card
target: card ISDN Internal

en: Internet Connection Configuration
target: konfigurasi koneksi Internet

en: Internet Connection Sharing
target: Pemakaian Bersama Koneksi Internet

en: Internet Connection Sharing currently disabled
target: Internet Connection Sharing masih dimatikan

en: Internet Connection Sharing currently enabled
target: Pemakaian Bersama Koneksi Internet telah aktif

en: Internet access
target: Akses Internet

en: Internet and Messaging
target: Internet dan Pesan

en: Internet configuration
target: Konfigurasi Internet

en: Internet connection
target: Koneksi Internet

en: Internet connection & configuration
target: Koneksi dan konfigurasi Internet

en: Internet connection configuration
target: konfigurasi koneksi Internet

en: Internet connection sharing configuration
target: Koneksi dan konfigurasi sharing Internet

en: Internet connection sharing is now disabled.
target: Internet Connection Sharing telah dimatikan

en: Internet connection sharing is now enabled.
target: Internet Connection Sharing sudah aktif

en: Internet gateway
target: Gerbang Internet

en: Internet station
target: Komputer Internet

en: Introduction
    
    The operating system and the different components available in the Mandrake Linux distribution 
    shall be called the "Software Products" hereafter. The Software Products include, but are not 
    restricted to, the set of programs, methods, rules and documentation related to the operating 
    system and the different components of the Mandrake Linux distribution.
    
    
    1. License Agreement
    
    Please read carefully this document. This document is a license agreement between you and  
    MandrakeSoft S.A. which applies to the Software Products.
    By installing, duplicating or using the Software Products in any manner, you explicitly 
    accept and fully agree to conform to the terms and conditions of this License. 
    If you disagree with any portion of the License, you are not allowed to install, duplicate or use 
    the Software Products. 
    Any attempt to install, duplicate or use the Software Products in a manner which does not comply 
    with the terms and conditions of this License is void and will terminate your rights under this 
    License. Upon termination of the License,  you must immediately destroy all copies of the 
    Software Products.
    
    
    2. Limited Warranty
    
    The Software Products and attached documentation are provided "as is", with no warranty, to the 
    extent permitted by law.
    MandrakeSoft S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,
    incidental, direct or indirect damages whatsoever (including without limitation damages for loss of 
    business, interruption of business, financial loss, legal fees and penalties resulting from a court 
    judgment, or any other consequential loss) arising out of  the use or inability to use the Software 
    Products, even if MandrakeSoft S.A. has been advised of the possibility or occurance of such 
    damages.
    
    LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES
    
    To the extent permitted by law, MandrakeSoft S.A. or its distributors will, in no circumstances, be 
    liable for any special, incidental, direct or indirect damages whatsoever (including without 
    limitation damages for loss of business, interruption of business, financial loss, legal fees 
    and penalties resulting from a court judgment, or any other consequential loss) arising out 
    of the possession and use of software components or arising out of  downloading software components 
    from one of Mandrake Linux sites  which are prohibited or restricted in some countries by local laws.
    This limited liability applies to, but is not restricted to, the strong cryptography components 
    included in the Software Products.
    
    
    3. The GPL License and Related Licenses
    
    The Software Products consist of components created by different persons or entities.  Most 
    of these components are governed under the terms and conditions of the GNU General Public 
    Licence, hereafter called "GPL", or of similar licenses. Most of these licenses allow you to use, 
    duplicate, adapt or redistribute the components which they cover. Please read carefully the terms 
    and conditions of the license agreement for each component before using any component. Any question 
    on a component license should be addressed to the component author and not to MandrakeSoft.
    The programs developed by MandrakeSoft S.A. are governed by the GPL License. Documentation written 
    by MandrakeSoft S.A. is governed by a specific license. Please refer to the documentation for 
    further details.
    
    
    4. Intellectual Property Rights
    
    All rights to the components of the Software Products belong to their respective authors and are 
    protected by intellectual property and copyright laws applicable to software programs.
    MandrakeSoft S.A. reserves its rights to modify or adapt the Software Products, as a whole or in 
    parts, by all means and for all purposes.
    "Mandrake", "Mandrake Linux" and associated logos are trademarks of MandrakeSoft S.A.  
    
    
    5. Governing Laws 
    
    If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this 
    portion is excluded from this contract. You remain bound by the other applicable sections of the 
    agreement.
    The terms and conditions of this License are governed by the Laws of France.
    All disputes on the terms of this license will preferably be settled out of court. As a last 
    resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.
    For any question on this document, please contact MandrakeSoft S.A.
target: Introduction
    
    The operating system and the different components available in the Linux-Mandrake distribution 
    shall be called the "Software Products" hereafter. The Software Products include, but are not 
    restricted to, the set of programs, methods, rules and documentation related to the operating 
    system and the different components of the Linux-Mandrake distribution.
    
    
    1. License Agreement
    
    Please read carefully this document. This document is a license agreement between you and  
    MandrakeSoft S.A. which applies to the Software Products.
    By installing, duplicating or using the Software Products in any manner, you explicitly 
    accept and fully agree to conform to the terms and conditions of this License. 
    If you disagree with any portion of the License, you are not allowed to install, duplicate or use 
    the Software Products. 
    Any attempt to install, duplicate or use the Software Products in a manner which does not comply 
    with the terms and conditions of this License is void and will terminate your rights under this 
    License. Upon termination of the License,  you must immediately destroy all copies of the 
    Software Products.
    
    
    2. Limited Warranty
    
    The Software Products and attached documentation are provided "as is", with no warranty, to the 
    extent permitted by law.
    MandrakeSoft S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,
    incidental, direct or indirect damages whatsoever (including without limitation damages for loss of 
    business, interruption of business, financial loss, legal fees and penalties resulting from a court 
    judgment, or any other consequential loss) arising out of  the use or inability to use the Software 
    Products, even if MandrakeSoft S.A. has been advised of the possibility or occurance of such 
    damages.
    
    LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES
    
    To the extent permitted by law, MandrakeSoft S.A. or its distributors will, in no circumstances, be 
    liable for any special, incidental, direct or indirect damages whatsoever (including without 
    limitation damages for loss of business, interruption of business, financial loss, legal fees 
    and penalties resulting from a court judgment, or any other consequential loss) arising out 
    of the possession and use of software components or arising out of  downloading software components 
    from one of Linux-Mandrake sites  which are prohibited or restricted in some countries by local laws.
    This limited liability applies to, but is not restricted to, the strong cryptography components 
    included in the Software Products.
    
    
    3. The GPL License and Related Licenses
    
    The Software Products consist of components created by different persons or entities.  Most 
    of these components are governed under the terms and conditions of the GNU General Public 
    Licence, hereafter called "GPL", or of similar licenses. Most of these licenses allow you to use, 
    duplicate, adapt or redistribute the components which they cover. Please read carefully the terms 
    and conditions of the license agreement for each component before using any component. Any question 
    on a component license should be addressed to the component author and not to MandrakeSoft.
    The programs developed by MandrakeSoft S.A. are governed by the GPL License. Documentation written 
    by MandrakeSoft S.A. is governed by a specific license. Please refer to the documentation for 
    further details.
    
    
    4. Intellectual Property Rights
    
    All rights to the components of the Software Products belong to their respective authors and are 
    protected by intellectual property and copyright laws applicable to software programs.
    MandrakeSoft S.A. reserves its rights to modify or adapt the Software Products, as a whole or in 
    parts, by all means and for all purposes.
    "Mandrake", "Linux-Mandrake" and associated logos are trademarks of MandrakeSoft S.A.  
    
    
    5. Governing Laws 
    
    If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this 
    portion is excluded from this contract. You remain bound by the other applicable sections of the 
    agreement.
    The terms and conditions of this License are governed by the Laws of France.
    All disputes on the terms of this license will preferably be settled out of court. As a last 
    resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.
    For any question on this document, please contact MandrakeSoft S.A.

en: Iranian
target: Iran

en: Ireland
target: Irlandia

en: Is this an install or an update?
target: Akan instal atau update?

en: Is this correct?
target: Sudah sesuai?

en: Is this the correct setting?
target: Setting sudah benar?

en: Is your computer getting time syncronized to another computer?
    Mostly, this is used by medium-large Unix/Linux organizations
    to synchronize time for logging and such.  If you're not part
    of a larger office and haven't heard of this, you probably 
    aren't.
target: Apakah komputer Anda mendapatkan informasi jam dari komputer lain?
    Biasanya, fasilitas ini digunakan oleh organisasi sedang/besar Unix/Linux
    untuk sinkronisasi waktu untuk logging dan sebagainya. Bila Anda
    tidak tergabung dari kantor yang besar atau belum pernah dengar ini sebelumnya.
    jawab TIDAK deh

en: Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, LaserJet 1100/1200/1220/3200/3300 with scanner)?
target: Apakah printer Anda adalah alat multifungsi dari HP (OfficeJet, PSC, PhotoSmart LaserJet 1100/1200/1220/3200/3300 dengan scanner)?

en: Israeli
target: Ibrani

en: Israeli (Phonetic)
target: Ibrani (fonetik)

en: It is now time to specify which programs you wish to install on your
    system. There are thousands of packages available for Mandrake Linux, and
    you are not supposed to know them all by heart.
    
    If you are performing a standard installation from a CD-ROM, you will first
    be asked to specify the CDs you currently have (in Expert mode only). Check
    the CD labels and highlight the boxes corresponding to the CDs you have
    available for installation. Click "OK" when you are ready to continue.
    
    Packages are sorted in groups corresponding to a particular use of your
    machine. The groups themselves are sorted into four sections:
    
     * "Workstation": if you plan to use your machine as a workstation, select
    one or more of the corresponding groups;
    
     * "Development": if your machine is to be used for programming, choose
    the desired group(s);
    
     * "Server": if your machine is intended to be a server, you will be able
    to select which of the most common services you wish to install on your
    machine;
    
     * "Graphical Environment": finally, this is where you will choose your
    preferred graphical environment. At least one must be selected if you want
    to have a graphical workstation!
    
    Moving the mouse cursor over a group name will display a short explanatory
    text about that group. If you deselect all groups when performing a regular
    installation (by opposition to an upgrade), a dialog will pop up proposing
    different options for a minimal installation:
    
     * "With X": install the fewer packages possible to have a working
    graphical desktop;
    
     * "With basic documentation": installs the base system plus basic
    utilities and their documentation. This installation is suitable for
    setting up a server;
    
     * "Truly minimal install": will install the strict minimum necessary to
    get a working Linux system, in command line only. This installation is
    about 65Mb large.
    
    You can check the "Individual package selection" box, which is useful if
    you are familiar with the packages being offered or if you want to have
    total control over what will be installed.
    
    If you started the installation in "Upgrade" mode, you can unselect all
    groups to avoid installing any new package. This is useful for repairing or
    updating an existing system.
target: Kini kita tentukan program yg akan diinstal di sistem Anda. Ribuan paket
    tersedia di Mandrake Linux, Anda tak perlu mengenal semuanya.
    
    Jika Anda menjalankan instalasi standar dari CDROM, Anda akan diminta
    menentukan CD yg Anda punya (hanya pd mode Ahli). Cek label CD dan
    tandai kotak yg sesuai dg CD yg Anda miliki utk instalasi. Klik "OK" jika
    Anda siap melanjutkan.
    
    Paket disortir menurut grup sesuai kegunaan mesin Anda.
    Grup diurutkan ke dalam empat bagian:
    
     * "Workstation": jika Anda ingin menggunakan mesin Anda sbg workstation, pilih
    satu/lebih grup yg sesuai.
    
     * "Development": jika mesin akan digunakan utk pemrograman, pilih grup
    yg diinginkan.
    
     * "Server": jika mesin diinginkan menjadi server, Anda dapat
    memilih servis paling umum yg akan diinstal.
    
     * "Lingkungan Grafis": akhirnya, di sini Anda memilih lingkungan
    grafis. Minimal Anda harus pilih satu jika ingin punya workstation grafis!
    
    Untuk melihat penjelasan singkat, gerakkan kursor mouse ke atas nama grup.
    Jika Anda tak memilih satu grup pun saat melakukan instalasi normal (bukan
    upgrade) popup dialog akan muncul dengan menu instalasi minimal:
    
     * "Dengan X" Instal paket minimal yang memungkinkan kerja dengan desktop
    grafis;
    
     * "Dengan dokumentasi dasar" Instal sistem plus peralatan dasar dan
    dokumentasinya. Instalasi ini cocok untuk setup server.
    
     * "Instalasi minimal sungguh" Hanya instal kebutuhan minimum sistem,
    dalam baris perintah saja. Butuh sekitar 65Mb.
    
    Anda dapat memilih "Pilih paket sendiri", berguna jika Anda tahu baik
    paket yg disediakan atau ingin mengontrol instalasi secara total.
    
    Jika Anda memulai instalasi dg mode "Upgrade", Anda dapat melepas seleksi
    semua group utk menghindari instalasi paket baru. Ini berguna utk reparasi
    atau update sistem yg ada.

en: Italian
target: Itali

en: Italy
target: Itali

en: Japan (bcast)
target: Jepang (siaran)

en: Japan (cable)
target: Jepang (kabel)

en: Japanese 106 keys
target: Jepang 106 tombol

en: Join the Free Software world
target: Gabung dunia Perangkat Lunak Bebas

en: Journalised FS
target: FS terjournal

en: KDE Workstation
target: Workstation KDE

en: Keep the changes?
    Current configuration is:
    
    %s
target: Lakukan perubahan?
    Konfigurasi sekarang adalah:
    
    %s

en: Kernel Boot Timeout
target: Timeout Kernel Boot

en: Keyboard layout: %s
target: Layout Keyboard: %s

en: Know how to use this printer
target: Cara penggunaan printer ini

en: Korean keyboard
target: Keyboard Korea

en: LAN Configuration
target: konfigurasi LAN

en: LAN configuration
target: konfigurasi LAN

en: LAN connection
target: konfigurasi LAN

en: LBA (doesn't work on old BIOSes)
target: LBA (tidak bisa dipakai pada BIOS kuno)

en: LDAP Base dn
target: Basis dn LDAP

en: LDAP Server
target: Server LDAP

en: LILO (the LInux LOader) and grub are bootloaders: they are able to boot
    either GNU/Linux or any other operating system present on your computer.
    Normally, these other operating systems are correctly detected and
    installed. If this is not the case, you can add an entry by hand in this
    screen. Be careful to choose the correct parameters.
    
    You may also not want to give access to these other operating systems to
    anyone. In which case, you can delete the corresponding entries. But then,
    you will need a boot disk in order to boot those other operating systems!
target: LILO (LInux LOader) dan Grub adalah pemuat boot. Dua-duanya dapat mem-boot
    GNU/Linux atau sistem operasi lain yang ada di komputer Anda.
    Biasanya, sistem operasi yang sudah ada akan dideteksi secara benar dan
    diinstallkan. Bila ternyata salah, Anda dapat menambahkan sendiri di layar
    ini. Hati-hati dalam memilih parameter yang benar.
    
    Anda mungkin ingin agar tak ada yg dapat mengakses sistem operasi lain ini.
    Anda dapat menghapus entrinya. Tapi untuk bisa masuk ke sistem operasi tsb.
    Anda perlu bootdisk nantinya.

en: LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally
    automated. In fact, DrakX analyzes the disk boot sector and acts
    accordingly, depending on what it finds here:
    
     * if a Windows boot sector is found, it will replace it with a grub/LILO
    boot sector. Hence, you will be able to load either GNU/Linux or another
    OS;
    
     * if a grub or LILO boot sector is found, it will replace it with a new
    one.
    
    If in doubt, DrakX will display a dialog with various options.
    
     * "Bootloader to use": you have three choices:
    
        * "GRUB": if you prefer grub (text menu).
    
        * "LILO with graphical menu": if you prefer LILO with its graphical
    interface.
    
        * "LILO with text menu": if you prefer LILO with its text menu interface.
    
     * "Boot device": in most cases, you will not change the default
    ("/dev/hda"), but if you prefer, the bootloader can be installed on the
    second hard drive ("/dev/hdb"), or even on a floppy disk ("/dev/fd0");
    
     * "Delay before booting the default image": when rebooting the computer,
    this is the delay granted to the user to choose in the bootloader menu,
    another boot entry than the default one.
    
    !! Beware that if you choose not to install a bootloader (by selecting
    "Cancel" here), you must ensure that you have a way to boot your Mandrake
    Linux system! Also, be sure you know what you do before changing any of the
    options. !!
    
    Clicking the "Advanced" button in this dialog will offer many advanced
    options, which are reserved to the expert user.
    
    After you have configured the general bootloader parameters, the list of
    boot options which will be available at boot time will be displayed.
    
    If there is another operating system installed on your machine, it will
    automatically be added to the boot menu. Here, you can choose to fine-tune
    the existing options. Select an entry and click "Modify" to modify or
    remove it; "Add" creates a new entry; and "Done" goes on to the next
    installation step.
target: LILO/GRUB adalah pemuat boot GNU/Linux. Step ini biasanya otomatis penuh.
    DrakX menganalisa sektor boot disk dan beraksi menurut apa yg ditemukan:
    
     * jika sektor boot Mindows ditemukan, ia akan menggantinya dg sektor boot
    GRUB/LILO. Jadi Anda akan dapat memuat baik GNU/Linux maupun OS lain;
    
     * jika sektor boot GRUB/LILO ditemukan, ia akan menggantinya dg yg baru;
    
    Jika ragu, DrakX akan menampilkan dialog dengan opsi bervariasi.
    
     * "Pemuat boot yang digunakan": ada tiga pilihan:
    
        * "GRUB": jika Anda suka GRUB (menu teks).
    
        * "LILO dengan menu grafis": jika Anda suka LILO dg antarmuka grafis.
    
        * "LILO dengan menu teks": jika suka LILO dengan antarmuka menu teks.
    
     * "Device boot": Umumnya Anda takkan mengubah standar ("/dev/hda"),
    tapi jika suka, bootloader dapat diinstal di harddisk kedua ("/dev/hdb"),
    ataupun disket ("/dev/fd0").
    
     * "Delay sebelum boot ke image default": delay yang diberikan di menu
    pemuat boot kepada user saat me-reboot komputer untuk memilih entri.
    
    !! Awas, jika pemuat boot tak diinstal (dg memilih "Cancel" di sini),
    pastikan Anda punya jalan memboot sistem Mandrake Linux Anda! Juga pastikan
    bahwa Anda tahu apa yang Anda lakukan sebelum mengubah opsi. !!
    
    Klik "Tambahan" untuk menampilkan opsi lain, yg disediakan utk user ahli.
    
    Setelah parameter pemuat-boot dikonfigurasikan, ditampilkan daftar opsi
    boot yang akan muncul saat boot.
    
    Jika ada OS lain terinstal di mesin Anda, itu akan otomatis ditambahkan ke
    menu boot. Di sini Anda dapat memperbaiki opsi yang ada. Pilih entri dan
    klik "Modifikasi" untuk mengubah atau menghapusnya; "Tambah"
    membuat masukan baru; dan "Selesai" membawa Anda ke tahap instalasi
    berikutnya.

en: LILO with graphical menu
target: LILO dengan menu grafis

en: LILO with text menu
target: LILO dengan menu teks

en: LILO/grub Installation
target: Instalasi LILO/grub

en: LPD and LPRng do not support IPP printers.
target: LPD and LPRng tak men-support printer IPP.

en: LVM name?
target: nama LVM?

en: LVM-disks %s
target: Disk LVM %s

en: Latin American
target: Amerika Latin

en: Latvian
target: Latvia

en: Launch Aurora at boot time
target: Jalankan aurora saat boot

en: Launch packet filtering for Linux kernel 2.2 series, to set
    up a firewall to protect your machine from network attacks.
target: Luncurkan filter paket Linux kernel seri 2.2, untuk set-up
    firewall yang melindungi mesin Anda dari serangan network.

en: Launch the ALSA (Advanced Linux Sound Architecture) sound system
target: Luncurkan sistem suara ALSA (Advanced Linux Sound Architecture)

en: Launch the X-Window system at start
target: Jalankan X-Window saat sistem dimulai

en: Launch the sound system on your machine
target: Aktifkan sistem suara

en: Launch userdrake
target: Luncurkan userdrake

en: Leaving in %d seconds
target: Tinggalkan dalam %d detik

en: Left "Windows" key
target: Kunci "Mindows" kiri

en: Lexmark inkjet configuration
target: Konfigurasi Lexmark inkjet

en: License agreement
target: Persetujuan Lisensi

en: Lilo/grub mode
target: mode Lilo/Grub

en: Linux Virtual Server, used to build a high-performance and highly
    available server.
target: Linux Virtual Server, digunakan utk membangun server dg performans dan
    kapasitas tinggi.

en: Linuxconf will sometimes arrange to perform various tasks
    at boot-time to maintain the system configuration.
target: Linuxconf kadang bekerja keras saat boot utk perawatan konfigurasi sistem.

en: List of data corrupted:
target: Daftar data rusak:

en: List of data to restore:
target: Daftar data simpan ulang:

en: Listed above are the existing Linux partitions detected on your hard drive.
    You can keep the choices made by the wizard, they are good for most common
    installations. If you make any changes, you must at least define a root
    partition ("/"). Do not choose too small a partition or you will not be
    able to install enough software. If you want to store your data on a
    separate partition, you will also need to create a partition for "/home"
    (only possible if you have more than one Linux partition available).
    
    Each partition is listed as follows: "Name", "Capacity".
    
    "Name" is structured: "hard drive type", "hard drive number",
    "partition number" (for example, "hda1").
    
    "Hard drive type" is "hd" if your hard drive is an IDE hard drive and
    "sd" if it is a SCSI hard drive.
    
    "Hard drive number" is always a letter after "hd" or "sd". For IDE
    hard drives:
    
     * "a" means "master hard drive on the primary IDE controller";
    
     * "b" means "slave hard drive on the primary IDE controller";
    
     * "c" means "master hard drive on the secondary IDE controller";
    
     * "d" means "slave hard drive on the secondary IDE controller".
    
    With SCSI hard drives, an "a" means "lowest SCSI ID", a "b" means
    "second lowest SCSI ID", etc.
target: Yang terdaftar di atas adalah partisi Linux terdeteksi pd hard drive Anda.
    Anda dapat memakai pilihan yg dibuat oleh wizard, itu baik utk instalasi
    umum. Bila Anda mengubah pilihan, setidaknya Anda perlu mendefinisikan
    partisi root ("/"). Jangan pilih partisi yg terlalu kecil agar dapat
    menginstal software dg leluasa. Bila Anda ingin menyimpan data pada partisi
    lain, Anda perlu membuat partisi "/home" (hanya mungkin jika punya lebih
    dari satu partisi Linux.)
    
    Tiap partisi terdaftar sbb: "Nama", "Kapasitas".
    
    "Nama" berstruktur: "tipe hard drive", "nomor hard drive",
    "nomor partisi" (misalnya "hda1").
    
    "Tipe hard drive" adalah "hd" utk drive IDE dan "sd" utk drive SCSI.
    
    "Nomor Hard Drive", selalu berupa huruf setelah "hd" atau "sd". Bila berupa IDE, maka:
    
       *"a" berarti "hard drive master pada kontroller IDE primer",
    
       *"b" berarti "hard drive slave pada kontroler IDE primer",
    
       *"c" berarti "hard drive master pada kontroler IDE sekunder",
    
       *"d" berarti "hard drive slave pada kontroler IDE sekunder",
    
    
    Pada drive SCSI, "a" berarti "hard drive utama, "b" berarti "hard drive kedua", dsb...

en: Lithuanian "number row" QWERTY
target: Lithuania "number row" QWERTY

en: Lithuanian "phonetic" QWERTY
target: Lithuania "phonetic" QWERTY

en: Lithuanian AZERTY (new)
target: Lithuania AZERTY (baru)

en: Lithuanian AZERTY (old)
target: Lithuania AZERTY (lama)

en: Load from floppy
target: Muat dari floppy

en: Load the drivers for your usb devices.
target: Muat driver piranti USB

en: Load/Save on floppy
target: Muat/Simpan di floppy

en: Loading from floppy
target: Memuat dari floppy

en: Loading module %s failed.
    Do you want to try again with other parameters?
target: Module %s gagal diload.
    Mau coba lagi dengan parameter yang lain?

en: Local Printer
target: Printer Lokal

en: Local Printers
target: Printer Lokal

en: Local files
target: File lokal

en: Local printer
target: Printer lokal

en: Location
target: Lokasi

en: Looking for available packages
target: Sedang mencari paket yang tersedia

en: Loopback file name:
target: Nama file loopback:

en: Loopback file name: %s
target: Nama file loopback: %s

en: Loopback file(s):
       %s
target: File loopback:
       %s

en: MOVE YOUR WHEEL!
target: gerakan rodanya!

en: Macedonian
target: Macedonia

en: Mail/Groupware/News
target: Server, Mail/Groupware/News

en: Mail/SMS alert
target: Peringatan Mail/SMS

en: Mail/SMS alert configuration
target: Konfigurasi peringatan Mail/SMS

en: Making printer port available for CUPS ...
target: Membuat port printer tersedia utk CUPS ...

en: Mandatory package %s is missing
target: Paket wajib %s hilang

en: Mandrake Control Center
target: Pusat Kontrol Mandrake

en: Mandrake Linux 8.2 is the ultimate development platform. Discover the power of the GNU gcc compiler as well as the best Open Source development environments
target: Mandrake Linux 8.2 adalah platform development terampuh. Temukan power compiler gcc GNU, juga lingkungan development Sumber Bebas terbaik

en: Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use the latest software to play music and audio files, edit and organize your images and photos, watch TV and videos, and much more
target: Mandrake Linux 8.2 memaksimalkan komputer multimedia Anda! Gunakan software mutakhir untuk memainkan file music dan audio, edit dan mengatur gambar dan foto, melihat TV dan video, dan banyak lagi

en: Mandrake Linux 8.2 provides 11 different graphical desktop environments and window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker 0.8, and the rest
target: Mandrake Linux 8.2 menyediakan 11 lingkungan desktop grafis dan manajer window termasuk GNOME 1.4, KDE 2.2.2, Window Maker 0.8, dan lain-lain

en: Mandrake Linux 8.2 provides the best Open Source games - arcade, action, cards, sports, strategy, ...
target: Mandrake Linux 8.2 menyediakan game terbaik Source Terbuka - arcade, aksi, kartu, olah raga, strategi, ...

en: Mandrake Linux 8.2 provides the best software to access everything the Internet has to offer: Surf the web & view animations with Mozilla and Konqueror, exchange email & organize your personal information with Evolution and Kmail, and much more
target: Mandrake Linux 8.2 menyajikan software terbaik untuk mengakses segala yang disediakan Internet: Jelajah web & lihat animasi dengan Mozilla dan Konqueror, tukar email & atur info pribadi Anda dengan Evolution dan Kmail, dan banyak lagi

en: Mandrake Linux Installation %s
target: Instalasi Linux Mandrake %s

en: Mandrake Tools Explanations
target: Penjelasan Piranti Mandrake

en: MandrakeCampus
target: KampusMandrake

en: MandrakeConsulting
target: KonsultasiMandrake

en: MandrakeExpert
target: AhliMandrake

en: MandrakeStore
target: TokoMandrake

en: Manual configuration
target: Konfigurasi manual

en: Messages
target: Pesan

en: Minimal install
target: Instalasi minimal

en: Modify
target: Modifikasi

en: Modify RAID
target: Ganti RAID

en: Modify printer configuration
target: Modifikasi konfigurasi printer

en: Module options:
target: Pilihan Modul:

en: Monitor HorizSync: %s
target: HorizSync Monitor: %s

en: Monitor VertRefresh: %s
target: VertRefresh Monitor: %s

en: Monitor not configured
target: Monitor tidak dikonfigurasi

en: Monitor that can do 1600x1200 at 70 Hz
target: Monitor yang dapat mencapai 1600x1200 pada 70 Hz

en: Monitor that can do 1600x1200 at 76 Hz
target: Monitor yang dapat mencapai 1600x1200 pada 76 Hz

en: More
target: Tambahan

en: More Graphical Desktops (Gnome, IceWM)
target: Desktop Grafis tambahan (Gnome, IceWM)

en: More Options
target: Opsi Tambahan

en: More than one Microsoft partition has been detected on your hard drive.
    Please choose the one you want to resize in order to install your new
    Mandrake Linux operating system.
    
    Each partition is listed as follows: "Linux name", "Windows name"
    "Capacity".
    
    "Linux name" is structured: "hard drive type", "hard drive number",
    "partition number" (for example, "hda1").
    
    "Hard drive type" is "hd" if your hard dive is an IDE hard drive and
    "sd" if it is a SCSI hard drive.
    
    "Hard drive number" is always a letter after "hd" or "sd". With IDE
    hard drives:
    
     * "a" means "master hard drive on the primary IDE controller";
    
     * "b" means "slave hard drive on the primary IDE controller";
    
     * "c" means "master hard drive on the secondary IDE controller";
    
     * "d" means "slave hard drive on the secondary IDE controller".
    
    With SCSI hard drives, an "a" means "lowest SCSI ID", a "b" means
    "second lowest SCSI ID", etc.
    
    "Windows name" is the letter of your hard drive under Windows (the first
    disk or partition is called "C:").
target: Ada lebih dari satu partisi wicrosoft mindows terdeteksi pada harddisk
    Anda. Pilih partisi yang hendak Anda ubah ukurannya untuk instalasi sistem
    operasi Linux Mandrake.
    
    Tiap partisi terdaftar sbb: "Nama Linux","Nama windows","Kapasitas".
    
    "Nama Linux" berstruktur: "tipe hard drive", "nomor hard drive",
    "nomor partisi" (misalnya "hda1").
    
    "Tipe hard drive" adalah "hd" bila drive bertipe IDE dan "sd" jika
    berupa drive SCSI.
    
    "Nomor Hard Drive", selalu berupa huruf setelah "hd" atau "sd". Jika
    berupa IDE, maka:
    
     * "a" berarti "hard drive master pada kontroller IDE primer",
    
     * "b" berarti "hard drive slave pada kontroler IDE primer",
    
     * "c" berarti "hard drive master pada kontroler IDE sekunder",
    
     * "d" berarti "hard drive slave pada kontroler IDE sekunder",
    
    Pada drive SCSI, "a" berarti "ID SCSI terkecil, "b" berarti "ID SCSI
    terkecil kedua", dst.
    
    "Nama windows" adalah huruf hard drive Anda pada windows (disk pertama
    pada partisi disebut "C:").

en: Mount options
target: Opsi mount

en: Mount point
target: Posisi mount

en: Mount point:
target: Posisi mount:

en: Mount points must begin with a leading /
target: Mount point harus diawali dengan /

en: Mounted
target: Telah di-mount

en: Mounts and unmounts all Network File System (NFS), SMB (Lan
    Manager/Windows), and NCP (NetWare) mount points.
target: Mount dan unmount semua Network File System (NFS), SMB (Lan
    Manager/windows), dan NCP (Netware).

en: Mouse Port
target: Port Mouse

en: Mouse Systems
target: Sistem Mouse (serial)

en: Mouse device: %s
target: Device Mouse: %s

en: Mouse type: %s
target: Jenis Mouse: %s

en: Move
target: Pindah

en: Move files to the new partition
target: Pindah file ke partisi baru

en: Moving
target: Pindah

en: Moving files to the new partition
target: Pindah file ke partisi baru

en: Moving partition...
target: Memindahkan partisi...

en: Multi-frequency that can do 1280x1024 at 60 Hz
target: Multi-frequency yang dapat mencapai 1280x1024 pada 60 Hz

en: Multi-frequency that can do 1280x1024 at 74 Hz
target: Multi-frequency yang dapat mencapai 1280x1024 pada 74 Hz

en: Multi-frequency that can do 1280x1024 at 76 Hz
target: Multi-frequency yang dapat mencapai 1280x1024 pada 76 Hz

en: Multi-head configuration
target: Konfigurasi head majemuk

en: Multimedia - Graphics
target: Multimedia - Grafis

en: Multimedia and Graphics
target: Multimedia dan Grafik

en: Multimedia station
target: Komputer Multimedia

en: NCP queue name missing!
target: Nama antrian NCP hilang!

en: NCP server name missing!
target: Nama server NCP hilang!

en: NFS is a popular protocol for file sharing across TCP/IP
    networks. This service provides NFS file locking functionality.
target: NFS adalah protokol populer untuk file sharing di TCP/IP
    Servis ini memberikan fungsi file lock pada NFS.

en: NFS is a popular protocol for file sharing across TCP/IP networks.
    This service provides NFS server functionality, which is configured via the
    /etc/exports file.
target: NFS adalah protokol populer untuk file sharing lewat network TCP/IP.
    Servis ini dinyalakan untuk membuat NFS server bisa jalan dengan menggunakan
    konfigurasi pada file /etc/exports.

en: NFS server, SMB server, Proxy server, ssh server
target: server NFS, SMB, Proxy, SSH

en: NIS Domain
target: Domain NIS

en: NIS Server
target: Server NIS

en: NTP Server
target: Server NTP

en: Name of printer
target: Nama Printer

en: Name of printer should contain only letters, numbers and the underscore
target: Nama printer harus hanya berupa huruf, angka, atau garisbawah

en: Name of the profile to create (the new profile is created as a copy of the current one) :
target: Nama profil yg akan dibuat (profil baru dibuat sbg salinan yg sekarang) :

en: Name:
target: Nama:

en: Name: %s
target: Nama: %s

en: NetWare Printer Options
target: Pilihan printer NetWare

en: Netherlands
target: Belanda

en: Network
target: Jaringan

en: Network Computer (client)
target: Komputer Jaringan (klien)

en: Network Computer server
target: Komputer Server Jaringan

en: Network Configuration
target: Konfigurasi Jaringan

en: Network Configuration Wizard
target: Wizard Konfigurasi Jaringan

en: Network configuration
target: Konfigurasi Jaringan

en: Network configuration (%d adapters)
target: Konfigurasi Jaringan (adapter %d)

en: Network functionality not configured
target: Fungsi network tak dikonfigurasi

en: Network interface
target: Antarmuka jaringan

en: Network interface already configured
target: Antarmuka network telah dikonfigurasi

en: Network printer (TCP/Socket)
target: Printer jaringan (TCP/Socket)

en: Network printers can only be installed after the installation. Choose "Hardware" and then "Printer" in the Mandrake Control Center.
target: Printer network hanya dapat diinstal setelah instalasi ini. Pilih "Hardware" lalu "Printer" di Pusat Kontrol Mandrake.

en: New configuration (isdn-light)
target: Konfigurasi baru (isdn-light)

en: New printer name
target: Nama printer baru

en: New profile...
target: Buat profil baru...

en: New size in MB:
target: Ukuran baru dalam MB:

en: NewStyle Categorizing Monitor
target: Kategori Monitor Gaya Baru

en: NewStyle Monitor
target: Monitor GayaBaru

en: Newzealand
target: Selandia Baru

en: Next
target: Lanjut

en: Next ->
target: Lanjutkan ->

en: No
target: Tidak

en: No (firewall this off from the internet)
target: Tidak (lindungi dari internet)

en: No I don't need DHCP
target: Tidak, tak perlu DHCP

en: No I don't need NTP
target: Tidak, tak perlu NTP

en: No ISDN PCI card found. Please select one on the next screen.
target: Tiada kartu PCI ISDN ditemukan. Pilihlah satu pd layar berikut.

en: No Internet Connection Sharing has ever been configured.
target: Internet Connection Sharing belum pernah dikonfigurasikan

en: No additional information
    about this service, sorry.
target: Mohon maaf, informasi lengkap
    tentang layanan ini tidak tersedia.

en: No configuration file found 
    please click Wizard or Advanced.
target: Tiada file konfigurasi 
    Mohon klik Dukun atau Lanjutan

en: No configuration, please click Wizard or Advanced.
target: Tiada konfigurasi, mohon klik Dukun atau Lanjutan.

en: No ethernet network adapter has been detected on your system.
    I cannot set up this connection type.
target: Tidak ada adapter jaringan ethernet yang terdeteksi di sistem ini.
    Saya jadinya tidak dapat mengkonfigurasikan tipe koneksi ini deh.

en: No ethernet network adapter has been detected on your system. Please run the hardware configuration tool.
target: Tiada adapter jaringan ethernet terdeteksi. Jalankan konfigurator hardware.

en: No floppy drive available
target: Wah maaf nih, tak ada floppy drive yah ?

en: No free space for 1MB bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake
target: Tiada ruang 1MB utk bootstrap! Instal akan berlanjut, tetapi utk mem-boot sistem, Anda perlu membuat partisi bootstrap di DiskDrake

en: No local printer found!
target: Tiada printer lokal ditemukan!

en: No local printer found! To manually install a printer enter a device name/file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...).
target: Printer tak ditemukan! Untuk menginstal printer secara manual masukkan nama alat / file di baris masukan (Port Parallel: /dev/lp0, /dev/lp1, ..., sebanding dg LPT1:, LPT2:, ..., printer USB pertama: /dev/usb/lp0, printer USB kedua: /dev/usb/lp1, ...).

en: No mouse
target: Tidak pakai mouse

en: No network adapter on your system!
target: Tidak ada adaptor jaringan di sistem ini!

en: No password
target: Tak berkatasandi

en: No printer
target: Tidak ada printer

en: No root partition found to perform an upgrade
target: Tiada partisi root tertemukam utk upgrade

en: No sharing
target: Tiada pemakaian bersama

en: No sound card detected. Try "harddrake" after installation
target: Kartu suara tak terdeteksi. Coba "harddrake" setelah instalasi

en: No test pages
target: Tiada halaman tes

en: No, I don't want autologin
target: Tidak, saya tak mau autologin

en: Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz
target: Non-Interlaced SVGA, 1024x768 pada 60 Hz, 800x600 pada 72 Hz

en: Normal Mode
target: Modus Normal

en: Normal modem connection
target: Konfigurasi koneksi modem biasa

en: Normally, DrakX selects the right keyboard for you (depending on the
    language you have chosen) and you won't even see this step. However, you
    might not have a keyboard that corresponds exactly to your language: for
    example, if you are an English speaking Swiss person, you may still want
    your keyboard to be a Swiss keyboard. Or if you speak English but are
    located in Quebec, you may find yourself in the same situation. In both
    cases, you will have to go back to this installation step and select an
    appropriate keyboard from the list.
    
    Click on the "More" button to be presented with the complete list of
    supported keyboards.
target: Normalnya, DrakX memilih papanketik utk Anda (sesuai bahasa yg Anda pilih)
    dan Anda bahkan takkan melihat tahap ini. Tapi Anda mungkin tak punya papan
    ketik yg persis cocok dg bhs Anda: misalnya, jika Anda orang Swis berbahasa
    Inggris, Anda mungkin masih ingin keyboard Swis. Atau jika Anda berbahasa
    Inggris tapi tinggal di Quebec, Anda mungkin menghadapi masalah sama. Dalam
    kedua kasus, Anda akan harus kembali ke tahap instalasi ini dan memilih
    keyboard yg sesuai dari daftar.
    
    Klik "Lagi" utk menampilkan daftar lengkap keyboard ter-support.

en: Norway
target: Norwegia

en: Norwegian
target: Norwegia

en: Not connected
target: Tak tersambung

en: Not enough free space for auto-allocating
target: Tak cukup ruangan untuk alokasi otomatis

en: Not enough free space to allocate new partitions
target: Tidak ada cukup ruangan untuk mengalokasikan partisi baru

en: Not enough partitions for RAID level %d
target: Partisi tidak cukup untuk level RAID %d

en: Not enough swap to fulfill installation, please add some
target: Instalasi tidak bisa diteruskan karena swap kurang, tambahin dong

en: Not formatted
target: Belum diformat

en: Nothing to do
target: Tiada yang dikerjakan

en: OK to restore the other files.
target: OK utk simpan ulang file lain.

en: OKI winprinter configuration
target: Konfigurasi winprinter OKI

en: Office
target: Aplikasi Perkantoran

en: Office Workstation
target: Komputer Kantor

en: Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc
target: Program office: pengolah kata (kword, abiword), spreadsheet (kspread, gnumeric), viewer pdf,dsb

en: Old configuration (isdn4net)
target: Konfigurasi lama (isdn4net)

en: On CUPS server "%s"
target: Di server CUPS "%s"

en: On boot
target: Saat boot

en: Open Firmware Delay
target: Delay Open Firmware

en: Option %s must be a number!
target: Opsi %s harus berupa bilangan!

en: Option %s must be an integer number!
target: Opsi %s harus berupa integer!

en: Option %s out of range!
target: Opsi %s keluar batas!

en: Option ``Restrict command line options'' is of no use without a password
target: Pilihan ``Batasi parameter command line'' tidak ada gunanya tanpa katasandi

en: Options
target: Pilihan

en: Options: %s
target: Pilihan: %s

en: Other
target: Lainnya

en: Other Graphical Desktops
target: Desktop Grafis lainnya

en: Other Media
target: Media Lain

en: Other OS (MacOS...)
target: OS Lain (MacOS...)

en: Other OS (SunOS...)
target: OS Lain (SunOS...)

en: Other OS (windows...)
target: OS Lain (windows...)

en: PCMCIA support is usually to support things like ethernet and
    modems in laptops.  It won't get started unless configured so it is safe to have
    it installed on machines that don't need it.
target: PCMCIA digunakan untuk menjalankan perangkat semacam ethernet atau modem pada laptop.
    Dia tak bisa jalan kecuali dikonfigurasikan di sini, jadi tak apa-apa
    kalau tak diinstall di mesin yang tak perlu PCMCIA.

en: PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel.
target: Support PCMCIA tak ada lagi utk kernel 2.2, pakailah kernel 2.4.

en: PDQ only supports local printers, remote LPD printers, and Socket/TCP printers.
target: PDQ hanya men-support printer lokal, LPD remote, dan Soket/TCP.

en: Package Group Selection
target: Pilihan Grup Paket

en: Package List to Install
target: Daftar Paket yang akan diinstal

en: Package selection
target: Pilihan paket

en: Parameters
target: Parameter

en: Paranoid
target: Pengecut

en: Partition booted by default
        (for MS-DOS boot, not for lilo)
target: Partisi di-boot secara default
        (untuk MS-DOS boot, bukan untuk lilo)

en: Partition table of drive %s is going to be written to disk!
target: Tabel partisi pada drive %s akan ditulis ke disk!

en: Partition table type: %s
target: Partisi tipe: %s

en: Partitioning failed: %s
target: Proses partisi gagal: %s

en: Password
target: Katasandi

en: Password (again)
target: Katasandi (lagi)

en: Password are now enabled, but use as a networked computer is still not recommended.
target: Katasandi akan diaktifkan, tapi mohon jangan disambungkan ke jaringan.

en: Percentage of packages to install
target: Persentase paket yang akan diinstall

en: Personal Finance
target: Keuangan Pribadi

en: Personal Information Management
target: Pengelolaan Informasi Pribadi

en: Phone number
target: Nomor telepon

en: Photo test page
target: Halaman tes foto

en: Pipe job into a command
target: Pipe job ke perintah

en: Please Build backup before to restore it...
     or verify that your path to save is correct.
target: Buatlah backup sebelum menyimpan ulang...
     atau pastikan path utk menyimpan sudah benar.

en: Please Wait... Applying the configuration
target: Tunggu ya, sedang mengaktifkan konfigurasi

en: Please Wait... Verifying installed packages
target: Tunggu, paket terinstal sedang diverifikasi

en: Please be patient. This operation can take several minutes.
target: Sabar... Proses ini akan makan waktu beberapa menit

en: Please be sure that the cron daemon is included in your services.
target: Pastikan daemon cron masuk dalam daftar servis.

en: Please check all users that you want to include in your backup.
target: Periksa semua user yang ingin Anda masukkan ke backup.

en: Please check if you are using CDRW media
target: Periksa apakah Anda menggunakan media CDRW

en: Please check if you want to erase your CDRW before
target: Cek apakah Anda ingin menghapus CDRW sebelum

en: Please check if you want to include
     install boot on your CD.
target: Cek jika Anda ingin memasukkan
     boot instalasi di CD Anda.

en: Please check if you want to include install boot on your CD.
target: Cek jika Anda ingin memasukkan boot instalasi ke CD

en: Please choose a language to use.
target: Pilih bahasan yg akan dipakai.

en: Please choose for each step whether it will replay like your install, or it will be manual
target: Pada tiap tahapan pilih apakah instalasi akan diulang, atau akan manual

en: Please choose load or save package selection on floppy.
    The format is the same as auto_install generated floppies.
target: Pilih muat/simpan seleksi paket di floppy.
    Formatnya sama dengan floppy buatan auto_install.

en: Please choose on which serial port your mouse is connected to.
target: Di serial port mana mouse Anda dicolokkan ?

en: Please choose one of the following classes of installation:
target: Pilihlah kelas instalasi berikut:

en: Please choose the
    media for backup.
target: Pilih media backup.

en: Please choose the first number of the 10-range you wish to edit,
    or just hit Enter to proceed.
    Your choice?
target: Pilihlah nomor pertama dari 10-range yang ingin Anda edit,
    atau tekan Enter untuk melanjutkan.
    Pilihan Anda?

en: Please choose the port where your printer is connected to or enter a device name/file name in the input line
target: Pilih port tempat printer Anda terhubung atau masukkan nama alat/file di baris masukan

en: Please choose the port where your printer is connected to.
target: Pilihlah port tempat printer Anda terhubung.

en: Please choose the time 
    interval between each backup
target: Pilih interval waktu backup

en: Please choose the type of your mouse.
target: Pilihlah tipe mouse Anda.

en: Please choose what network adapter will be connected to your Local Area Network.
target: Silakan pilih adapter jaringan yang hendak disambung ke Local Area Network Anda.

en: Please choose what you want to backup
target: Pilih apa yang akan di-backup

en: Please choose where you want to backup
target: Pilih tempat backup

en: Please choose which network adapter you want to use to connect to Internet
target: Pilih adapter jaringan yang akan digunakan untuk terhubung ke Internet

en: Please choose which serial port your modem is connected to.
target: Di serial port mana modem Anda terhubung?

en: Please choose your CD space
target: Pilih ruang CD Anda

en: Please choose your keyboard layout.
target: Pilih layout keyboard Anda

en: Please choose your preferred language for installation and system usage.
    
    Clicking on the "Advanced" button will allow you to select other
    languages to be installed on your workstation. Selecting other languages
    will install the language-specific files for system documentation and
    applications. For example, if you will host users from Spain on your
    machine, select English as the main language in the tree view and in the
    Advanced section click on the box corresponding to "Spanish|Spain".
    
    Note that multiple languages may be installed. Once you have selected any
    additional locales, click the "OK" button to continue.
target: Pilih bahasa kesukaan Anda utk instalasi dan penggunaan sistem.
    
    Klik "Tambahan" utk memilih bahasa-bahasa lain yg akan diinstal di
    workstation Anda. Hal ini akan menginstal file spesifik-bahasa dokumentasi
    sistem dan aplikasi. Misalnya jika Anda menginapkan user dari Spanyol di
    mesin Anda, pilih bhs Indonesia sbg bahasa utama di tampilan pohon dan di
    bagian Tambahan klik bintang abu-abu yg terkait dg "Spanyol".
    
    Anda dapat menginstal banyak bahasa. Setelah Anda selesai memilih tambahan
    bahasa (locale) klik "OK" untuk melanjutkan.

en: Please click on a media
target: Klik salah satu media

en: Please click on a partition
target: Silakan pilih partisi

en: Please enter proxy login and password, if any.
    Leave it blank if you don't want login/passwd
target: Ketik login proxy dan katasandinya, jika ada.
    Biarkan kosong jika tak ingin login/passwd

en: Please enter the IP configuration for this machine.
    Each item should be entered as an IP address in dotted-decimal
    notation (for example, 1.2.3.4).
target: Masukkan konfigurasi IP untuk mesin ini.
    Tiap item harus diberikan sebagai alamat IP dalam notasi decimal
    bertitik (misalnya 202.159.35.32).

en: Please enter the cd writer speed
target: Masukkan kecepatan penulis cd

en: Please enter the device name to use for backup
target: Masukkan nama alat utk backup

en: Please enter the directory to
     put the backup on this host.
target: Masukkan direktori utk
     meletakkan backup di host ini.

en: Please enter the directory to save:
target: Masukkan direktori utk penyimpanan:

en: Please enter the directory where backups are stored
target: Masukkan direktori tempat backup disimpan

en: Please enter the host name or IP.
target: Masukkan nama host atau IP.

en: Please enter the maximum size
     allowed for Drakbackup
target: Masukkan ukuran maximum
     yg diizinkan utk Drakbackup

en: Please enter your CD Writer device name
     ex: 0,1,0
target: Masukkan nama alat Penulis CD Anda
     mis: 0,1,0

en: Please enter your CD Writer device name (ex: 0,1,0)
target: Masukkan nama alat Penulis CD (mis: 0,1,0)

en: Please enter your host name if you know it.
    Some DHCP servers require the hostname to work.
    Your host name should be a fully-qualified host name,
    such as ``mybox.mylab.myco.com''.
target: Masukkan nama komputernya karena ada server DHCP yang mengharuskan adanya hostname ini.
    Hostname (nama komputer) sebaiknya merupakan nama host yg fully-qualified
    misalnya ``samson.ciawi.mdamt.net''.

en: Please enter your host name.
    Your host name should be a fully-qualified host name,
    such as ``mybox.mylab.myco.com''.
    You may also enter the IP address of the gateway if you have one
target: Masukkan nama komputernya.
    Hostname (nama komputer) sebaiknya merupakan nama host yg fully-qualified
    misalnya ``mdamt.fdns.net''.
    Anda juga bisa masukkan alamat IP gatewaynya kalau ada

en: Please enter your login
target: Masukkan login

en: Please enter your password
target: Masukkan katasandi

en: Please fill in the ftp proxy informations
    Leave it blank if you don't want an ftp proxy
target: Isilah info proxy ftp, kosongkan jika tak perlu

en: Please fill in the http proxy informations
    Leave it blank if you don't want an http proxy
target: Isilah info proxy http, kosongkan jika tak perlu

en: Please fill or check the field below
target: Silakan isi atau cek kolom berikut

en: Please give a user name
target: Silakan tulis nama user

en: Please insert the Boot floppy used in drive %s
target: Masukkan floppy boot ke drive %s

en: Please insert the Installation Cd-Rom in your drive and press Ok when done.
    If you don't have it, press Cancel to avoid live upgrade.
target: Masukkan CDROM Instalasi di drive Anda dan tekan OK
    Jika tak punya, tekan Batal untuk hindari upgrade live.

en: Please insert the Update Modules floppy in drive %s
target: Masukkan disket Update Modules ke drive %s

en: Please log out and then use Ctrl-Alt-BackSpace
target: Silakan log out dan tekan Ctrl-Alt-BackSpace

en: Please make a backup of your data first
target: Lebih dulu buatlah backup data Anda

en: Please relog into %s to activate the changes
target: Silakan masuk lagi ke %s untuk mengaktifkan perubahan

en: Please select data to backup...
target: Pilih data backup...

en: Please select data to restore...
target: Pilih data utk disimpan ulang...

en: Please select media for backup...
target: Pilih media backup...

en: Please select the correct port. For example, the "COM1" port under
    Windows is named "ttyS0" under GNU/Linux.
target: Pilih port yang benar. Misalnya "COM1" di Mindows bernama "ttyS0" di 
    GNU/Linux.

en: Please select the test pages you want to print.
    Note: the photo test page can take a rather long time to get printed and on laser printers with too low memory it can even not come out. In most cases it is enough to print the standard test page.
target: Pilihlah halaman tes yang ingin Anda cetak.
    Ingat: halaman tes photo perlu waktu lama untuk dicetak. Di printer laser bermemori rendah itu bahkan takkan muncul. Umumnya cukup halaman tes standar.

en: Please test the mouse
target: Silakan di test mousenya

en: Please try again
target: Silakan ulangi

en: Please uncheck or remove it on next time.
target: Mohon uncheck atau hapus nanti.

en: Please wait
target: Tunggulah

en: Please wait, preparing installation
target: Tunggu ya, saya sedang menyiapkan instalasi

en: Please,
    type in your tv norm and country
target: Tolong,
    tuliskan standar dan daerah tv Anda

en: Please, choose the type of your mouse.
target: Tipe mouse yang anda punya?

en: Please, choose your keyboard layout.
target: Pilih keyboard Anda

en: Polish
target: Polandia

en: Polish (qwerty layout)
target: Polandia (layout qwerty)

en: Polish (qwertz layout)
target: Polandia (layout qwertz)

en: Poor
target: Lemah

en: Portuguese
target: Portugis

en: Post Install
target: Instalasi Akhir

en: Post Uninstall
target: Un-Instalasi Akhir

en: Post-install configuration
target: Konfigurasi Instalasi akhir

en: Postfix is a Mail Transport Agent, which is the program that moves mail from one machine to another.
target: Postfix adalah Mail Transport Agent, program pengantar surat dari satu ke lain mesin.

en: Postfix mail server, Inn news server
target: Server mail Postfix, server news Inn

en: PostgreSQL or MySQL database server
target: Server database PostgreSQL atau MySQL

en: Potential LAN address conflict found in current config of %s!
target: Ada potensi konflik alamat LAN pada konfigurasi %s!

en: Precise RAM size if needed (found %d MB)
target: Ukuram RAM yg tepat (saya nemu %d MB)

en: Preference:
target: Kesukaan:

en: Preparing PrinterDrake ...
target: Persiapan PrinterDrake ...

en: Preparing X-Window configuration
target: Siap-siap konfigurasikan X

en: Preparing bootloader
target: Membuat bootloader

en: Preparing installation
target: Sedang menyiapkan instalasi

en: Preparing printer database ...
target: Persiapan database printer ...

en: Press enter to boot the selected OS, 'e' to edit the
target: Tekan enter untuk memboot OS yang terpilih, atau tekan 'e' untuk edit

en: Previous
target: Sebelumnya

en: Print
target: Cetak

en: Print Queue Name
target: Nama antrian printer

en: Print option list
target: Daftar opsi cetak

en: Print test pages
target: Cetak halaman tes

en: Printer %s
    What do you want to modify on this printer?
target: Printer %s
    Apa yg Anda inginkan utk modifikasi printer ini?

en: Printer Device URI
target: Device Printer URI

en: Printer Server
target: Server Printer

en: Printer connection type
target: Tipe koneksi printer

en: Printer default settings
    
    You should make sure that the page size and the ink type/printing mode (if available) and also the hardware configuration of laser printers (memory, duplex unit, extra trays) are set correctly. Note that with a very high printout quality/resolution printing can get substantially slower.
target: Setting standar printer
    
    Cek ukuran halaman dan jenis tinta/mode cetak (jika ada) juga konfigurasi perangkat keras printer laser (memori, unit duplex, tray extra). Ingat, pencetakan dg kualitas tinggi berjalan amat lambat.

en: Printer host name
target: Nama host printer

en: Printer host name missing!
target: Nama host printer hilang!

en: Printer manufacturer, model
target: Pembuat, model printer

en: Printer manufacturer, model, driver
target: Pembuat, model, driver printer

en: Printer model selection
target: Seleksi model printer

en: Printer name, description, location
target: Nama, penjelasan, lokasi printer

en: Printer on NetWare server
target: Printer di server NetWare

en: Printer on SMB/Windows 95/98/NT server
target: Printer di server SMB/windows 95/98/NT

en: Printer on parallel port \/*%s
target: Printer di port paralel \/*%s

en: Printer on remote CUPS server
target: Printer di server CUPS remote

en: Printer on remote lpd server
target: Printer di server lpd remote

en: Printer options
target: Opsi printer

en: Printerdrake has compared the model name resulting from the printer auto-detection with the models listed in its printer database to find the best match. This choice can be wrong, especially when your printer is not listed at all in the database. So check whether the choice is correct and click "The model is correct" if so and if not, click "Select model manually" so that you can choose your printer model manually on the next screen.
    
    For your printer Printerdrake has found:
    
    %s
target: Printerdrake telan membandingkan nama model printer terdeteksi dengan daftar model di database untuk menemukan yang paling cocok. Ini mungkin salah, khususnya jika printer Anda tak terdaftar di semua database. Periksa apakah pilihan sudah benar dan klik "Model sudah benar", jika salah, klik "Pilih model secara manual" sehingga Anda dapat memilih model printer Anda secara manual di layar berikut.
    
    Printerdrake telah menemukan:
    
    %s

en: Printerdrake is able to auto-detect your locally connected parallel and USB printers for you, but note that on some systems the auto-detection CAN FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON YOUR OWN RISK!
    
    Do you really want to get your printers auto-detected?
target: Printerdrake dapat mendeteksi otomatis printer paralel dan USB yang terkoneksi lokal, tapi ingat di beberapa sistem deteksi otomatis DAPAT MEMBEKUKAN SISTEM ANDA DAN MEMBUAT SISTEM FILE ANDA RUSAK! Jadi kerjakan ATAS RESIKO ANDA!
    
    Anda ingin deteksi otomatis printer?

en: Printing
target: Pencetakan

en: Printing on the printer "%s"
target: Pencetakan di printer "%s"

en: Printing system:
target: Sistem cetak:

en: Printing test page(s)...
target: Pencetakan halaman tes...

en: Printing/Scanning on "%s"
target: Cetak/Scan di "%s"

en: Problems installing package %s
target: Problem instalasi paket %s

en: Problems occured during configuration.
    Test your connection via net_monitor or mcc. If your connection doesn't work, you might want to relaunch the configuration
target: Problem konfigurasi.
    Tes koneksi Anda via net_monitor atau mcc. Jika koneksi tak berjalan, Anda mungkin perlu jalankan konfigurasi dari awal lagi

en: Profile to delete:
target: Profil yang hendak dihapus:

en: Profile:
target: Profil:

en: Programs to manage your finance, such as gnucash
target: Program untuk mengelola keuangan, misalnya gnucash

en: Protocol
target: Protokol

en: Protocol for the rest of the world
target: Protokol lain

en: Protocol for the rest of the world 
     no D-Channel (leased lines)
target: Protokol lain 
     tanpa D-Channel (leased lines)

en: Provider dns 1 (optional)
target: DNS Provider 1 (boleh diisi boleh tidak)

en: Provider dns 2 (optional)
target: DNS Provider 2 (boleh diisi boleh tidak)

en: Provider name (ex provider.net)
target: Nama provider (misalnya provider.net.id)

en: Provider phone number
target: Nomor telepon provider

en: Proxies configuration
target: Konfigurasi proxy

en: Proxy configuration
target: Konfigurasi proxy

en: Proxy should be ftp://...
target: Proxy biasanya ftp://...

en: Proxy should be http://...
target: Proxy biasanya http://...

en: Quality support from the Linux Community, and from MandrakeSoft, is just around the corner. And if you're already a Linux veteran, become an "Expert" and share your knowledge at our support website
target: Support kualitas dari Komunitas Linux, dan dari MandrakeSoft, ada di sekitar pojok. Jika Anda veteran Linux, jadilah "Ahli" dan bagilah pengetahuan Anda di situs web support kami

en: Quit
target: Keluar

en: Quit without saving
target: Keluar tanpa menyimpan

en: Quit without writing the partition table?
target: Keluar dari program tanpa menyimpan dalam tabel partisi?

en: RAID-disks %s
target: Disk RAID %s

en: Raw printer
target: Printer telanjang

en: Raw printer (No driver)
target: Printer telanjang (tanpa driver)

en: Re-configure interface and DHCP server
target: Konfigurasi ulang antarmuka dan server DHCP

en: Re-submit
target: Kirim ulang

en: Read carefully!
target: Baca dengan seksama!

en: Reading printer data ...
target: Pembacaan data printer...

en: Reading printer database ...
target: Pembacaan database printer...

en: Real name
target: Nama Lengkap

en: Recommended
target: Disarankan

en: Recommended (%dMB)
target: Disarankan (%dMB)

en: Refresh printer list (to display all available remote CUPS printers)
target: Penyegaran daftar printer (utk menampilkan semua printer CUPS remote)

en: Refreshing printer data ...
target: Penyegaran data printer...

en: Refuse
target: Tolak

en: Reload partition table
target: Muat ulang tabel partisi

en: Remember this password
target: Ingat katasandi ini

en: Remote Administration
target: Administrasi remote

en: Remote CUPS server
target: server CUPS remote

en: Remote Printers
target: Printer Remote

en: Remote host name
target: Nama host remote

en: Remote host name missing!
target: Nama host remote hilang!

en: Remote lpd Printer Options
target: Pilihan printer lpd remote

en: Remote printer
target: printer remote

en: Remote printer name
target: Nama printer remote

en: Remote printer name missing!
target: Nama printer remote hilang!

en: Removable media automounting
target: Mount otomatis media lepas

en: Remove List
target: Hapus Daftar

en: Remove Selected
target: Hapus Pilihan

en: Remove Windows(TM)
target: Buang windows

en: Remove entry
target: Hapus entri

en: Remove fonts on your system
target: Hapus font di sistem Anda

en: Remove from LVM
target: Hapus dari LVM

en: Remove from RAID
target: Hapus dari RAID

en: Remove printer
target: Hapus printer

en: Remove the last item
target: Hapus item terakhir

en: Remove the logical volumes first
target: Hapus dulu volume logiknya

en: Remove the loopback file?
target: Hapus file loopback?

en: Remove this printer from Star Office/OpenOffice.org
target: Hapus printer ini dari Star Office/OpenOffice.org

en: Remove user directories before restore.
target: Hapus direktori user sebelum simpan ulang.

en: Removing %s
target: Hapus %s

en: Removing LPD...
target: Hapus LPD...

en: Removing LPRng...
target: Hapus LPRng...

en: Removing old printer "%s" ...
target: Menghapus printer lama "%s" ...

en: Removing printer "%s" ...
target: Menghapus printer "%s" ...

en: Removing printer from Star Office/OpenOffice.org
target: Hapus printer dari Star Office/OpenOffice.org

en: Replay
target: Ulang

en: Rescue partition table
target: Selamatkan tabel partisi

en: Reselect correct fonts
target: Pilih ulang font yg benar

en: Resize
target: Ubah ukuran

en: Resizing
target: Sedang mengubah ukuran

en: Resolution
target: Resolusi

en: Resolution: %s
target: Resolusi: %s

en: Resolutions
target: Resolusi

en: Resolutions not chosen yet
target: Resolusi belum ditentukan

en: Restart XFS
target: Jalankan ulang XFS

en: Restarting printing system ...
target: Mulai ulang sistem cetak ...

en: Restore
target: Simpan ulang

en: Restore Other
target: Simpan ulang Lain-lain

en: Restore Users
target: Simpan ulang User

en: Restore all backups
target: Simpan ulang semua backup

en: Restore from Hard Disk.
target: Simpan ulang dari Hard Disk.

en: Restore partition table
target: Kembalikan tabel partisi

en: Restore system
target: Simpan ulang sistem

en: Restoring from file %s failed: %s
target: Proses restore dari file %s gagal: %s

en: Restrict command line options
target: Batasi parameter command line

en: Right "Windows" key
target: Kunci "Mindows" kanan

en: Right Alt key
target: kunci Alt Kanan

en: Root Partition
target: Partisi root

en: Root partition size in MB:
target: Ukuran partisi root dalam MB:

en: Run "sndconfig" after installation to configure your sound card
target: Jalankan "sndconfig" setelah instalasi untuk konfigurasi kartu suara

en: Runs commands scheduled by the at command at the time specified when
    at was run, and runs batch commands when the load average is low enough.
target: Menjalankan perintah terjadwal dengan perintah at pada waktu tertentu
    saat at dijalankan, dan memulai perintah secara batch waktu rata-rata load
    sedang rendah.

en: Russian
target: Rusia

en: Russian (Yawerty)
target: Rusia (Yawerty)

en: SILO Installation
target: Instalasi SILO

en: SMB (Windows 9x/NT) Printer Options
target: Pilihan printer SMB (windows 95/NT)

en: SMB server IP
target: IP server SMB

en: SMB server host
target: Host server SMB

en: Samba share name missing!
target: Nama share Samba hilang!

en: Save
target: Simpan

en: Save & Quit
target: Simpan & Keluar

en: Save as..
target: Simpan di...

en: Save on floppy
target: Simpan di floppy

en: Save packages selection
target: Simpan pilihan paket

en: Save partition table
target: Simpan tabel partisi

en: Saves and restores system entropy pool for higher quality random
    number generation.
target: Menyimpan dan mengembalikan pool entropi sistem untuk membuat
    angka acak dengan kualitas sangat acak.

en: Scanning for TV channels
target: Men-scan kanal TV

en: Scanning for TV channels in progress ...
target: Kanal TV sedang di-scan ...

en: Scanning on your HP multi-function device
target: Alat multifungsi HP sedang di-scan

en: Scanning partitions to find mount points
target: Mendeteksi partisi untuk mencari lokasi mount

en: Scientific Workstation
target: Aplikasi Ilmu pengetahuan

en: Screenshots will be available after install in %s
target: Screenshot akan tersedia setelah instal di %s

en: Search fonts in installed list
target: Cari font di daftar instalasi

en: Search installed fonts
target: Cari font terinstal

en: Search servers
target: Cari Server

en: Second DNS Server (optional)
target: Server DNS Sekondari (boleh tidak diisi)

en: Second floppy drive
target: Drive disket kedua

en: Sector
target: Sektor

en: Secure Connection
target: Koneksi Aman

en: Security
target: Keamanan

en: Security level
target: Tingkat keamanan

en: See hardware info
target: Lihat info hardware

en: Select Printer Connection
target: Pilih koneksi Printer

en: Select Printer Spooler
target: Pilih spooler printer

en: Select a graphic card
target: Pilih kartu grafis

en: Select a scanner
target: Pilih scanner

en: Select another media to restore from
target: Pilih media lain utk disimpan ulang

en: Select file
target: Pilih file

en: Select installation class
target: Pilih kelas instalasi

en: Select model manually
target: Pilih model secara manual

en: Select the files or directories and click on 'Add'
target: Pilih file atau direktori dan klik 'Tambah'

en: Select the font file or directory and click on 'Add'
target: Pilih file font atau direktori dan klik 'Tambah'

en: Select the memory size of your graphic card
target: Pilih memori kartu grafis Anda

en: Select user manually
target: Pilih user secara manual

en: Select your provider.
     If it's not in the list, choose Unlisted
target: Pilih provider Anda.
    Bila tidak ada dalam daftar, pilih Tidak Terdaftar

en: Selected All
target: Semua Dipilih

en: Selected size is larger than available space
target: Ukuran terpilih melebihi area yg ada

en: Send mail report after each backup to :
target: Kirim laporan mail setelah tiap backup ke :

en: Sending files...
target: Kirim file...

en: Serbian (cyrillic)
target: Serbia (cyrillic)

en: Server Software
target: Piranti Lunak Server

en: Services
target: Servis

en: Services and deamons
target: Services dan daemon

en: Services: %d activated for %d registered
target: Servis: %d diaktifkan utk %d tercatat

en: Set of tools for mail, news, web, file transfer, and chat
target: Kumpulan tool untuk mail, news, web, transfer file, dan chat

en: Set of tools to read and send mail and news (pine, mutt, tin..) and to browse the Web
target: Kumpulan tool untuk membaca dan mengirimkan email dan news (pine, mutt, tin..) dan untuk membrowse Web

en: Set root password
target: Set katasandi root

en: Set this printer as the default
target: Set printer ini sebagai standar

en: Set up printer manually
target: Setup printer secara manual

en: Setting security level
target: Pilih tingkat keamanan

en: Settings
target: Setting

en: Setup filesystems
target: Setup filesystem

en: Share name
target: Nama share

en: Show all
target: Tunjukan seluruhnya

en: Show automatically selected packages
target: Tunjukkan paket yang sudah dipilih secara otomatis

en: Show current interface configuration
target: Tampilkan konfigurasi antarmuka

en: Show information
target: Lihat info

en: Show only for the selected day
target: Tampilkan hari terpilih saja

en: Size in MB:
target: Ukuran dalam MB:

en: Size: %d KB
target: Ukuran: %d KB

en: Size: %s
target: Ukuran: %s

en: Size: %s
target: Ukuran: %s

en: Skip
target: Lewatkan

en: Slovakian (QWERTY)
target: Slovakia (QWERTY)

en: Slovakian (QWERTZ)
target: Slovakia (QWERTZ)

en: Slovenian
target: Slovenia

en: Some hardware on your computer needs ``proprietary'' drivers to work.
    You can find some information about them at: %s
target: Ada hardwaare di komputer ini yang membutuhkan driver ``proprietary''.
    Anda bisa mencari informasinya di: %s

en: Some important packages didn't get installed properly.
    Either your cdrom drive or your cdrom is defective.
    Check the cdrom on an installed computer using "rpm -qpl Mandrake/RPMS/*.rpm"
target: Ada paket yang penting tak benar diinstalnya.
    Mungkin saja drive cdrom atau cdromnya yang rusak.
    Cek dulu cdromnya di komputer yang sudah terinstall Linux dengan
    perintah "rpm -qpl Mandrake/RPMS/*.rpm" dulu gih

en: Some steps are not completed.
    
    Do you really want to quit now?
target: Ada tahapan yang tidak diselesaikan.
    
    Anda ingin keluar sekarang?

en: Something bad is happening on your drive. 
    A test to check the integrity of data has failed. 
    It means writing anything on the disk will end up with random trash
target: Ada sesuatu yang buruk terjadi pada drive Anda,
    hal ini saya ketahui saat gagal mengecek integritas data di situ.
    Artinya, data apapun yang ditulis ke situ akan gagal.

en: Sorry I won't accept to create /boot so far onto the drive (on a cylinder > 1024).
    Either you use LILO and it won't work, or you don't use LILO and you don't need /boot
target: Maaf, Saya tidak mau membuat /boot di drive ini (silindernya > 1024).
    Kalau Anda pakai LILO dan tak jalan, atau Anda tak mau LILO dan tak mau /boot juga

en: Sorry, no floppy drive available
target: Tiada floppy drive tersedia

en: Sound and video playing/editing programs
target: Program untuk memainkan/mengedit suara dan video

en: Sound card
target: Sound Card

en: South Africa
target: Afrika Selatan

en: Spanish
target: Spanyol

en: Specify CUPS server
target: Tentukan server CUPS

en: Specify options
target: Tentukan opsi

en: Standard
target: Standar

en: Standard VGA, 640x480 at 60 Hz
target: VGA Standar, 640x480 pada 60 Hz

en: Standard test page
target: Halaman tes standar

en: Start
target: Mulai

en: Start sector:
target: Sektor awal:

en: Start: sector %s
target: Mulai: sektor %s

en: Started on boot
target: Dijalankan saat boot

en: Starting network ...
target: Pemulaian network...

en: Starting the printing system at boot time
target: Inisiasi sistem cetak pada saat boot

en: Starts the X Font Server (this is mandatory for XFree to run).
target: Aktifkan Server Font X (agar XFree dapat berjalan)

en: State
target: Status

en: Summary
target: Ringkasan

en: Sun - Mouse
target: Mouse Sun

en: Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz
target: Super VGA, 1024x768 pada 87 Hz interlaced, 800x600 pada 56 hz

en: Super VGA, 800x600 at 56 Hz
target: VGA Super, 800x600 pada 56 Hz

en: Support the OKI 4w and compatible winprinters.
target: Support OKI 4w and winprinter kompatibel.

en: Suppress Fonts Files
target: Sembunyikan File Font

en: Suppress temporary Files
target: Sembunyikan file temporer

en: Swap partition size in MB:
target: Ukuran partisi swap dalam MB:

en: Sweden
target: Swedia

en: Swedish
target: Swedia

en: Swiss (French layout)
target: Swis (layout Prancis)

en: Swiss (German layout)
target: Swis (layout Jerman)

en: Switching from ext2 to ext3
target: Pindah dari ext2 ke ext3

en: Syslog is the facility by which many daemons use to log messages
    to various system log files.  It is a good idea to always run syslog.
target: Syslog adalah fasilitas yang digunakan para daemon untuk mencatat
    pesan log sistem di file. Hidupkan aja deh syslognya.

en: System
target: Sistem

en: System mode
target: Mode sistem

en: TCP/Socket Printer Options
target: Opsi Printer TCP/Soket

en: TV card
target: TV Card

en: TV norm :
target: standar TV :

en: Table
target: Tabel

en: Tajik keyboard
target: Papanketik Tajik

en: Test again
target: Tes lagi

en: Test of the configuration
target: Tes konfigurasi

en: Test page(s) have been sent to the printer.
    It may take some time before the printer starts.
target: Halaman test telah dikirim ke printer.
    Akan butuh waktu sebentar untuk mulai mencetak.

en: Test page(s) have been sent to the printer.
    It may take some time before the printer starts.
    Printing status:
    %s
target: Halaman test telah dikirim ke printer.
    Akan butuh waktu sebentar untuk mulai mencetak.
    Status cetak:
    %s

en: Test pages
target: Halaman tes

en: Test ports
target: Tes port

en: Testing your connection...
target: Tes koneksi Anda...

en: Thai keyboard
target: Papanketik Muangthai

en: Thank you for choosing Mandrake Linux 8.2
target: Terima kasih memilih Mandrake Linux 8.2

en: The DrakX Partitioning wizard found the following solutions:
target: Wizard partisi DrakX menemukan solusi berikut:

en: The FAT resizer is unable to handle your partition, 
    the following error occured: %s
target: Saya tidak dapat mengubah ukuran partisi FAT ini,
    Ada error ini yang terjadi: %s

en: The IP address should look like 192.168.1.20
target: Alamat IP harus seperti 192.168.1.20

en: The K Desktop Environment, the basic graphical environment with a collection of accompanying tools
target: The K Desktop Environment, lingkungan grafis dasar dg kumpulan tool-tool yang menyertainya

en: The Local Network did not finish with `.0', bailing out.
target: Jaringan Lokal tak berakhiran `.0', keluar.

en: The Mandrake Linux 8.2 Control Center is a one-stop location for fully customizing and configuring your Mandrake system
target: Pusat Kontrol Mandrake Linux 8.2 adalah tempat terpadu untuk mengkonfigurasi sistem Mandrake Anda

en: The Mandrake Linux installation is spread out over several CD-ROMs. DrakX
    knows if a selected package is located on another CD-ROM and will eject the
    current CD and ask you to insert a different one as required.
target: Instalasi Mandrake Linux terdiri atas bbrp CDROM. DrakX tahu jika paket
    terpilih berada di CDROM lain dan akan mengeluarkan CD yg ada utk kemudian
    meminta Anda memasukkan CD yg diperlukan.

en: The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by
    booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<
    at the prompt. But in case your computer cannot boot from the CD-ROM, you
    should come back to this step for help in at least two situations:
    
     * when installing the bootloader, DrakX will rewrite the boot sector (MBR)
    of your main disk (unless you are using another boot manager), to allow you
    to start up with either Windows or GNU/Linux (assuming you have Windows in
    your system). If you need to reinstall Windows, the Microsoft install
    process will rewrite the boot sector, and then you will not be able to
    start GNU/Linux!
    
     * if a problem arises and you cannot start up GNU/Linux from the hard disk,
    this floppy disk will be the only means of starting up GNU/Linux. It
    contains a fair number of system tools for restoring a system, which has
    crashed due to a power failure, an unfortunate typing error, a typo in a
    password, or any other reason.
    
    When you click on this step, you will be asked to enter a disk inside the
    drive. The floppy disk you will insert must be empty or contain data which
    you do not need. You will not have to format it since DrakX will rewrite
    the whole disk.
target: CDROM Mandrake Linux punya mode pertolongan built-in, yg bisa diakses dg
    mem-boot dari CDROM, tekan >>F1<< dan ketik >>rescue<< di prompt. Tapi jika
    komputer Anda tak dapat mem-boot dari CDROM, kembalilah ke tahap ini untuk
    pertolongan dalam setidaknya 2 situasi:
    
     * saat instalasi bootloader, DrakX akan menulis ulang sektor boot (MBR)
    disk utama Anda (kecuali jika Anda memakai manajer boot lain) sehingga Anda
    dapat menjalankan GNU/Linux atau Mindows (jika Anda punya Mindows di sistem
    Anda). Jika Anda menginstal Mindows lagi, proses instal micro$oft akan
    menulis ulang sektor boot, dan Anda takkan dapat menjalankan GNU/Linux!
    
     * jika ada masalah sehingga Anda tak dapat menjalankan GNU/Linux dari hard
    disk, disket ini adalah jalan satu-satunya utk menjalankan GNU/Linux. Ini
    berisi sejumlah alat utk mereparasi sistem yg rusak karena kegagalan power,
    salah ketik, alpa kata sandi, dan lain-lain.
    
    Bila step ini diklik, Anda akan diminta memasukkan disket ke drive. Disket
    harus kosong / berisi data yg tak Anda perlukan. Tak perlu diformat sebab
    DrakX akan menulis ulang seluruh disket.

en: The auto install can be fully automated if wanted,
    in that case it will take over the hard drive!!
    (this is meant for installing on another box).
    
    You may prefer to replay the installation.
target: Bila Anda mau, auto install bisa dilakukan secara otomatis penuh,
    jadi instalasinya akan mengusai hard drive!
    (ini dimaksudkan untuk menginstall pada komputer lain)
    
    Mungkin Anda perlu mengulangi instalasinya.

en: The backup partition table has not the same size
    Still continue?
target: Backup tabel partisi tidak memiliki ukuran yg sama
    Jalan terus?

en: The change is done, but to be effective you must logout
target: Perubahan telah dilakukan, Anda harus logout agar perubahan berlaku

en: The encryption keys do not match
target: Kunci sandi tak cocok

en: The first time you try the X configuration, you may not be very satisfied
    with its display (screen is too small, shifted left or right...). Hence,
    even if X starts up correctly, DrakX then asks you if the configuration
    suits you. It will also propose to change it by displaying a list of valid
    modes it could find, asking you to select one.
    
    As a last resort, if you still cannot get X to work, choose "Change
    graphics card", select "Unlisted card", and when prompted on which
    server, choose "FBDev". This is a failsafe option which works with any
    modern graphics card. Then choose "Test again" to be sure.
target: Pertama kali mencoba konfigurasi X, Anda mungkin tak puas dg tampilannya
    (layar terlalu kecil, tergeser ke kiri/kanan...). Jadi walau X jalan dengan
    baik, DrakX akan bertanya apakah konfigurasi ini memuaskan. Mode valid yang
    ditemukan juga akan disajikan untuk dipilih.
    
    Jika Anda tetap gagal menjalankan X, pilih "Ubah kartu grafis", lalu
    "Kartu tak terdaftar", dan saat ditanya server apa yg Anda inginkan,
    pilih "FBDev". Ini adalah opsi failsafe yg jalan di kartu grafis modern.
    Lalu pilih "Tes lagi" agar yakin.

en: The floppy has been successfully generated.
    You may now replay your installation.
target: Floppy sukses dibuat. Instalasi bisa direplikasi.

en: The following packages are going to be installed
target: Paket ini yang akan diinstall

en: The following packages are going to be removed
target: Paket berikut adalah yang akan dihapus

en: The following printer was auto-detected, if it is not the one you want to configure, enter a device name/file name in the input line
target: Printer berikut terdeteksi otomatis, jika bukan yang ingin dikonfigurasikan, masukkan nama alat/file di baris masukan

en: The following printer was auto-detected. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on "Manual configuration".
target: Printer berikut terdeteksi otomatis. Konfigurasi printer akan bekerja otomatis. Jika printer Anda tak terdeteksi dengan benar atau jika ingin Anda konfigurasi sendiri, jalankan "Konfigurasi manual".

en: The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; or to view information about it.
target: Printer berikut telah dikonfigurasikan. Klik-dobel printer utk memodifikasi setting; membuatnya printer default; atau melihat info tentangnya.

en: The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; to view information about it; or to make a printer on a remote CUPS server available for Star Office/OpenOffice.org.
target: Printer berikut telah dikonfigurasikan. Klik-dobel printer utk memodifikasi setting; membuatnya printer default; atau melihat info tentangnya; atau membuat printer di server CUPS remote dapat dipakai oleh Star Office/OpenOffice.org.

en: The highlighted entry will be booted automatically in %d seconds.
target: Entri yang dipilih akan diboot secara otomatis dalam %d detik.

en: The inkjet printer drivers provided by Lexmark only support local printers, no printers on remote machines or print server boxes. Please connect your printer to a local port or configure it on the machine where it is connected to.
target: Driver printer inkjet yg disediakan Lexmark hanya men-support printer lokal, bukan printer di mesin remote atau kotak server cetak. Hubungkan printer Anda ke port lokal atau konfigurasikan di mesin yang terhubung dengannya.

en: The internet superserver daemon (commonly called inetd) starts a
    variety of other internet services as needed. It is responsible for starting
    many services, including telnet, ftp, rsh, and rlogin. Disabling inetd disables
    all of the services it is responsible for.
target: daemon superserver internet (biasa dipanggil inetd) bertugas untuk
    menjalankan servis-servis internet yang dibutuhkan. Dia bertanggung jawab
    atas banyak server, misalnya telnet, ftp, rsh, dan rlogin. Menonaktifkan
    inetd berarti menonaktifkan semua servis-servis tadi.

en: The model is correct
target: Model sudah benar

en: The most common way to connect with adsl is pppoe.
    Some connections use pptp, a few ones use dhcp.
    If you don't know, choose 'use pppoe'
target: Cara yang umum untuk terkoneksi ke adsl adalah dengan menggunakan pppoe.
    Namun ada juga yang menggunakan pptp, dan ada yang pakai dhcp saja.
    Bila ragu, pilih saja 'gunakan pppoe'

en: The network access was not running and could not be started. Please check your configuration and your hardware. Then try to configure your remote printer again.
target: Akses network tak jalan dan tak dapat dimulai. Cek konfigurasi dan hardware Anda, lalu coba konfigurasikan printer remote Anda lagi.

en: The network configuration done during the installation cannot be started now. Please check whether the network gets accessable after booting your system and correct the configuration using the Mandrake Control Center, section "Network & Internet"/"Connection", and afterwards set up the printer, also using the Mandrake Control Center, section "Hardware"/"Printer"
target: Konfigurasi network yang dilakukan saat instalasi kini tak dapat jalan. Tolong cek apakah network dapat diakses setelah sistem diboot dan betulkan konfigurasi dengan Pusat Kontrol Mandrake, bagian "Network & Internet"/"Koneksi", lalu set printer juga dg Pusat Kontrol Mandrake, bagian "Hardware"/"Printer"

en: The network needs to be restarted
target: Network perlu di-start ulang

en: The package %s needs to be installed. Do you want to install it?
target: Paket %s perlu diupgrade. Anda ingin instal?

en: The partition you've selected to add as root (/) is physically located beyond
    the 1024th cylinder of the hard drive, and you have no /boot partition.
    If you plan to use the LILO boot manager, be careful to add a /boot partition
target: Anda menambahkan partisi root di luar silinder 1024,
    dan Anda tidak memiliki partisi /boot. Apabila Anda akan menggunakan lilo
    (boot manager), hati-hati dalam menambahkan partisi /boot

en: The passwords do not match
target: Katasandi tidak sama

en: The passwords don't match. Try again!
target: Katasandi tak sama, coba lagi!

en: The per-user sharing uses the group "fileshare". 
    You can use userdrake to add a user in this group.
target: Sharing per-user menggunakan grup "fileshare". 
    Anda dapat memakai userdrake utk menambah user di grup ini.

en: The port number should be an integer!
target: Nomor port harus berupa bilangan bulat

en: The port part should be numeric
target: Bagian port harus berupa angka

en: The portmapper manages RPC connections, which are used by
    protocols such as NFS and NIS. The portmap server must be running on machines
    which act as servers for protocols which make use of the RPC mechanism.
target: Portmapper mengelola koneksi RPC, yang digunakan oleh protokol seperti
    NFS dan NIS. Server portmap harus jalan di mesin yang bertindak sebagai
    server untuk protokol yang menggunakan mekanisme RPC.

en: The printer "%s" already exists,
    do you really want to overwrite its configuration?
target: Sudah ada printer "%s", Anda benar ingin menindih konfigurasinya?

en: The printer "%s" is set as the default printer now.
target: Printer "%s" kini diset sbg printer standar.

en: The printer "%s" was successfully added to Star Office/OpenOffice.org.
target: Printer "%s" sukses ditambahkan ke Star Office/OpenOffice.org.

en: The printer "%s" was successfully removed from Star Office/OpenOffice.org.
target: Printer "%s" sukses dihapus dari Star Office/OpenOffice.org.

en: The printing system (%s) will not be started automatically when the machine is booted.
    
    It is possible that the automatic starting was turned off by changing to a higher security level, because the printing system is a potential point for attacks.
    
    Do you want to have the automatic starting of the printing system turned on again?
target: Sistem cetak (%s) takkan otomatis jalan saat mesin diboot.
    
    Sebabnya mungkin auto-start dimatikan sbg implikasi level sekuriti tinggi, karena sistem cetak potensial diserang.
    
    Anda ingin auto-start sistem cetak dinyalakan lagi?

en: The routed daemon allows for automatic IP router table updated via
    the RIP protocol. While RIP is widely used on small networks, more complex
    routing protocols are needed for complex networks.
target: Daemon routed digunakan untuk update tabel routing IP otomatis liwat
    protokol RIP. RIP dipakai di jaringan kecil, dan semakin besar jaringannya
    maka protokol routing yang canggih pun semakin dibutuhkan.

en: The rstat protocol allows users on a network to retrieve
    performance metrics for any machine on that network.
target: Protokol rstat digunakan pada jaringan untuk mengambil
    ukuran kinerja sistem di network.

en: The rusers protocol allows users on a network to identify who is
    logged in on other responding machines.
target: Protokol ruser digunakan di jaringan untuk mengidentifikasi siapa
    yang lagi login di jaringan.

en: The rwho protocol lets remote users get a list of all of the users
    logged into a machine running the rwho daemon (similiar to finger).
target: Protokol rwho digunakan untuk melihat daftar user yang sedang login
    di suatu sistem yang juga menjalankan daemon rwho (mirip dengan finger).

en: The setup has already been done, and it's currently enabled.
target: Konfigurasi telah selesai.Namun sekarang sudah aktif.

en: The setup has already been done, but it's currently disabled.
target: Konfigurasi telah seleasi.Namun sekarang masih dimatikan.

en: The setup of Internet connection sharing has already been done.
    It's currently disabled.
    
    What would you like to do?
target: Konfigurasi Internet Connection Sharing telah seleasi.
    Namun sekarang masih dimatikan.
    
    Apa yang ingin Anda lakukan?

en: The setup of Internet connection sharing has already been done.
    It's currently enabled.
    
    What would you like to do?
target: Konfigurasi Internet Connection Sharing telah seleasi.
    Namun sekarang sudah aktif.
    
    Apa yang ingin Anda lakukan?

en: The success of MandrakeSoft is based upon the principle of Free Software. Your new operating system is the result of collaborative work on the part of the worldwide Linux Community
target: Sukses MandrakeSoft berdasar prinsip Perangkat Lunak Bebas. OS baru Anda adalah hasil kerja kolaborasi Komunitas Linux seluruh dunia

en: The system doesn't seem to be connected to internet.
    Try to reconfigure your connection.
target: Sistem ini sepertinya tidak terhubung ke Internet deh.
    Cobalah konfigurasikan ulang koneksinya.

en: The system is now connected to Internet.
target: Sistem ini sekarang terhubung ke Internet.

en: The total size for the groups you have selected is approximately %d MB.
target: Ukuran total grup yang dipilih kira-kira %d MB.

en: The two critical parameters are the vertical refresh rate, which is the rate
    at which the whole screen is refreshed, and most importantly the horizontal
    sync rate, which is the rate at which scanlines are displayed.
    
    It is VERY IMPORTANT that you do not specify a monitor type with a sync range
    that is beyond the capabilities of your monitor: you may damage your monitor.
     If in doubt, choose a conservative setting.
target: Ada dua parameter penting, yaitu laju refresh vertikal, yaitu laju
    kecepatan saat seluruh layar direfresh, dan yang lebih penting lagi adalah
    laju sync horisontal, yaitu laju kecepatan saat menanyangkan scan line.
    
    Anda TIDAK BOLEH mengisi parameter yang tidak dapat
    diimbangi dengan kemampuan monitor Anda, karena monitor
    Anda akan rusak berat.
    Kalau Anda ragu, gunakan setting yang umum.

en: The user name must contain only lower cased letters, numbers, `-' and `_'
target: Nama user hanya boleh terdiri dari huruf, angka, `-' dan `_'

en: There are already some restrictions, and more automatic checks are run every night.
target: Sudah ada beberapa batasan, dan beberapa pengecekan otomatis berjalan tiap malam.

en: There is already a partition with mount point %s
target: Partisi dengan titik mount %s sudah ada

en: There is no FAT partitions to resize or to use as loopback (or not enough space left)
target: Tidak ada partisi FAT untuk diubah ukurannya atau untuk digunakan sebagai loopback (atau tidak ada cukup ruangan)

en: There is no existing partition to use
target: Tidak ada partisi yang bisa digunakan

en: There is only one configured network adapter on your system:
    
    %s
    
    I am about to setup your Local Area Network with that adapter.
target: Hanya ada satu adapter jaringan yang dikonfigurasikan di sistem ini:
    
    %s
    
    Apakah Anda mau melakukan setup Local Area Network untuk adapter itu?

en: There was an error installing packages:
target: Ada error saat menginstall paket

en: There was an error ordering packages:
target: Ada error mengurutkan paket

en: There you are. Installation is now complete and your GNU/Linux system is
    ready to use. Just click "OK" to reboot the system. You can start
    GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as
    soon as the computer has booted up again.
    
    The "Advanced" button (in Expert mode only) shows two more buttons to:
    
     * "generate auto-install floppy": to create an installation floppy disk
    which will automatically perform a whole installation without the help of
    an operator, similar to the installation you just configured.
    
       Note that two different options are available after clicking the button:
    
        * "Replay". This is a partially automated installation as the
    partitioning step (and only this one) remains interactive;
    
        * "Automated". Fully automated installation: the hard disk is completely
    rewritten, all data is lost.
    
       This feature is very handy when installing a great number of similar
    machines. See the Auto install section on our web site;
    
     * "Save packages selection"(*): saves the package selection as done
    previously. Then, when doing another installation, insert the floppy inside
    the drive and run the installation going to the help screen by pressing on
    the [F1] key, and by issuing >>linux defcfg="floppy"<<.
    
    (*) You need a FAT-formatted floppy (to create one under GNU/Linux, type
    "mformat a:")
target: Oke, instalasi kini selesai dan sistem GNU/Linux Anda siap dipakai. Klik
    "OK" utk reboot sistem. Anda dapat menjalankan GNU/Linux atau Windows,
    tergantung pilihan Anda (jika Anda memakai dual-boot).
    
    Tombol "Tambahan" (hanya di mode Ahli) menampilkan 2 tombol utk:
    
     * "Membuat floppy instalasi otomatis": utk membuat disket instalasi yang
    akan secara otomatis melakukan instalasi tanpa bantuan operator, sama dg
    instalasi yang baru Anda konfigurasikan.
    
       Ada dua opsi setelah tombol di-klik:
    
        * "Ulang". Instalasi semi-otomatis, hanya proses partisi yang tetap
    interaktif.
    
        * "Otomatis". Instalasi otomatis penuh: harddisk ditulis ulang
    seluruhnya, semua data hilang.
    
       Fitur ini amat praktis utk instalasi banyak mesin dg spesifikasi sama.
    Lihat pasal Auto install di website kami.
    
     * "Menyimpan pilihan paket"(*): simpan pilihan paket seperti yang dibuat
    sebelumnya. Lalu saat mengerjakan instalasi lain, masukkan floppy ke driver
    dan arahkan instalasi ke layar pertolongan dg menekan kunci [F1] lalu ketik
    >>linux defcfg="floppy"<<.
    
    (*) Anda perlu floppy berformat FAT (utk membuatnya di GNU/Linux, jalankan
    "mformat a:")

en: These commands you can also use in the "Printing command" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.
target: Komando ini dapat Anda pakai dalam kotak "Perintah cetak" dialog cetak di banyak aplikasi, tapi jangan berikan nama file di sini karena file yang dicetak akan diberikan oleh aplikasi.

en: These options can backup and restore all files in your /etc directory.
target: Opsi ini memungkinkan backup / simpan ulang semua file di direktori /etc.

en: This %s scanner is unsupported
target: Scanner %s ini tak disupport

en: This %s scanner must be configured by printerdrake.
    You can launch printerdrake from the Mandrake Control Center in Hardware section.
target: Scanner %s ini harus dikonfigurasikan oleh printerdrake.
    Anda dapat meluncurkan printerdrake dari Pusat Kontrol Mandrake bagian Hardware.

en: This command you can also use in the "Printing command" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
target: Perintah ini digunakan di kotak "Perintah cetak" di dialog cetak beberapa aplikasi. Tapi jangan berikan nama file di sini karena file yg dicetak akan diberikan oleh aplikasi.

en: This directory should remain within the root filesystem
target: Direktori ini harus ada di filesystem root

en: This encryption key is too simple (must be at least %d characters long)
target: Katasandi ini terlalu mudah (harus paling tidak %d karakter)

en: This floppy is not FAT formatted
target: Disketnya belum diformat dengan sistem FAT

en: This interface has not been configured yet.
    Launch the configuration wizard in the main window
target: Antarmuka ini belum dikonfigurasikan.
    Luncurkan dukun konfigurasi di window utama

en: This is a mandatory package, it can't be unselected
target: Paket ini harus diinstall, tak bisa dibuang

en: This is the most crucial decision point for the security of your GNU/Linux
    system: you have to enter the "root" password. "root" is the system
    administrator and is the only one authorized to make updates, add users,
    change the overall system configuration, and so on. In short, "root" can
    do everything! That is why you must choose a password that is difficult to
    guess DrakX will tell you if it is too easy. As you can see, you can choose
    not to enter a password, but we strongly advise you against this if only
    for one reason: do not think that because you booted GNU/Linux that your
    other operating systems are safe from mistakes. Since "root" can overcome
    all limitations and unintentionally erase all data on partitions by
    carelessly accessing the partitions themselves, it is important for it to
    be difficult to become "root".
    
    The password should be a mixture of alphanumeric characters and at least 8
    characters long. Never write down the "root" password it makes it too
    easy to compromise a system.
    
    However, please do not make the password too long or complicated because
    you must be able to remember it without too much effort.
    
    The password will not be displayed on screen as you type it in. Hence, you
    will have to type the password twice to reduce the chance of a typing
    error. If you do happen to make the same typing error twice, this
    ``incorrect'' password will have to be used the first time you connect.
    
    In Expert mode, you will be asked if you will be connecting to an
    authentication server, like NIS or LDAP.
    
    If your network uses the LDAP (or NIS) protocol for authentication, select
    "LDAP" (or "NIS") as authentication. If you do not know, ask your
    network administrator.
    
    If your computer is not connected to any administrated network, you will
    want to choose "Local files" for authentication.
target: Ini adalah poin terpenting penentuan sekuriti sistem GNU/Linux Anda: Anda
    harus mengisi katasandi "root". "root" adalah administrator sistem dan
    hanya dia yg berhak melakukan update, menambah user, mengubah konfigurasi
    sistem, dll. Singkatnya, "root" dapat melakukan apapun! Karena itu Anda
    harus memilih katasandi yang sulit ditebak - DrakX akan memberitahu jika
    terlalu mudah. Seperti Anda lihat, Anda dapat memilih utk tak memasukkan
    katasandi, tapi amat kami anjurkan tidak melakukannya jika alasannya hanya:
    tidak mengira bhw jika GNU/Linux di-boot, sistem operasi lain aman dari
    kesalahan. Karena "root" dapat melampaui semua batasan dan secara tidak
    sengaja menghapus semua data di partisi, menjadi "root" harus dipersulit.
    
    Katasandi harus berupa campuran nomor dan huruf minimal 8 karakter. Jangan
    pernah mencatat katasandi "root" - itu membuat sistem mudah dibajak.
    
    Tapi katasandi juga jangan terlalu panjang/rumit karena Anda harus ingat
    tanpa banyak usaha.
    
    Katasandi takkan muncul di layar seperti yg diketikkan. Anda harus dua kali
    mengisi katasandi utk mengurangi kemungkinan salah ketik. Jika Anda 2 kali
    melakukan kesalahan yg sama, katasandi "salah" ini akan dipakai pertama
    kali anda login.
    
    Pada mode ahli, Anda akan ditanya apakah akan berhubungan dengan server
    otentikasi seperti NIS atau LDAP.
    
    Jika jaringan Anda memakai protokol otentikasi LDAP/NIS, pilih "LDAP"
    (atau "NIS") utk otentikasi. Tanyalah admin jaringan Anda jika tak tahu.
    
    Jika komputer Anda tak terhubung dengan jaringan terkelola, pilihlah
    "File lokal" untuk otentikasi.

en: This is the standard security recommended for a computer that will be used to connect to the Internet as a client.
target: Ini adalah sekuriti standar, dianjurkan untuk komputer yang akan
    terkoneksi ke Internet sebagai klien.

en: This label is already used
target: Label ini sudah dipakai

en: This level is to be used with care. It makes your system more easy to use,
    but very sensitive: it must not be used for a machine connected to others
    or to the Internet. There is no password access.
target: Level ini harus hati-hati. Level ini akan membuat sistem Anda akan mudah
    digunakan, tapi sangat sensitif: mesin ini tidak boleh digunakan untuk
    mesin yang terhubung ke mesin lain atau ke ke Internet. Tidak akan ada
    akses katasandi.

en: This package loads the selected keyboard map as set in
    /etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.
    You should leave this enabled for most machines.
target: Paket ini akan meload map keyboard yang dipilih di file
    /etc/sysconfig/keyboard. Mapnya bisa dipilih dari utility kbdconfig.
    Mending Anda aktifkan aja deh ini.

en: This package must be upgraded
    Are you sure you want to deselect it?
target: Paket ini mesti diupgrade
    Benar tak mau dipilih?

en: This partition can't be used for loopback
target: Partisi ini tak bisa dipakai sebagai loopback

en: This partition is not resizeable
target: Ukuran partisi ini tidak dapat diubah

en: This password is too simple
target: Katasandi ini terlalu sederhana

en: This password is too simple (must be at least %d characters long)
target: Katasandinya terlalu mudah (harus paling tidak %d karakter)

en: This user name is already added
target: User ini sudah ada sebelumnya

en: Time remaining
target: Sisa waktu

en: To activate the mouse,
target: Untuk mengaktifkan mouse,

en: To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Go to the US site and click on the "Drivers" button. Then choose your model and afterwards "Linux" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with "lexmarkmaintain" and adjust the head alignment settings with this program.
target: Agar dapat mencetak dg Lexmark inkjet Anda dan konfigurasi ini, Anda perlu driver printer inkjet yg disediakan Lexmark (http://www.lexmark.com/). Masuklah ke situs US dan klik tombol "Drivers". Pilih model Anda lalu sistem operasi "Linux". Driver disediakan berupa paket RPM atau shell script dg instalasi grafis interaktif. Anda tak perlu melakukan konfigurasi dg frontend grafis. Batalkan langsung setelah persetujuan lisensi.Lalu cetak halaman printhead alignment dg "lexmarkmaintain" dan cocokkan setting head alignmentdd dg program ini.

en: To get a list of the options available for the current printer click on the "Print option list" button.
target: Untuk mendapat daftar opsi printer klik "Daftar opsi cetak".

en: To get access to printers on remote CUPS servers in your local network you do not have to configure anything; the CUPS servers inform your machine automatically about their printers. All printers currently known to your machine are listed in the "Remote printers" section in the main window of Printerdrake. When your CUPS server is not in your local network, you have to enter the CUPS server IP address and optionally the port number to get the printer information from the server, otherwise leave these fields blank.
target: Untuk mengakses printer di server CUPS remote dari jaringan lokal, Anda tak perlu mengkonfigurasi apapun; server CUPS otomatis memberi tahu mesin Anda ttg printer mereka. Semua printer yg dikenal mesin Anda terdaftar di bagian "Printer remote" di window utama Printerdrake. Bila server CUPS Anda ada di jaringan lain, Anda harus menyodorkan alamat IP dan nomor port server CUPS utk mendapat info printer dari server. Jika tidak, biarkan kosong.

en: To have more partitions, please delete one to be able to create an extended partition
target: Untuk menambahkan partisi, hapus satu agar dapat membuat partisi extended

en: To install network printers, click "Cancel", switch to the "Expert Mode", and click "Add a new printer" again.
target: Untuk menginstal printer network, klik "Batal", pindah ke "Mode Ahli", dan klik "Tambah printer baru" lagi.

en: To know about the options available for the current printer read either the list shown below or click on the "Print option list" button.%s
target: Untuk mengetahui opsi printer bacalah daftar di bawah atau klik tombol "Daftar opsi cetak".%s

en: To print a file from the command line (terminal window) use the command "%s <file>" or "%s <file>".
target: Utk mencetak file dari baris komando (jendela terminal) gunakan komando "%s <file>" atau "%s <file>".

en: To print a file from the command line (terminal window) use the command "%s <file>".
target: Utk mencetak file dari baris komando (window terminal) gunakan perintah "%s <file>".

en: To print a file from the command line (terminal window) you can either use the command "%s <file>" or a graphical printing tool: "xpp <file>" or "kprinter <file>". The graphical tools allow you to choose the printer and to modify the option settings easily.
target: Utk mencetak file dari baris perintah (window terminal) pakailah komando komando "%s <file>" atau alat cetak grafis: "xpp <file>" atau "kprinter <file>". Alat grafis memungkinkan Anda memilih printer dan memodifikasi setting dengan mudah.

en: To print on a NetWare printer, you need to provide the NetWare print server name (Note! it may be different from its TCP/IP hostname!) as well as the print queue name for the printer you wish to access and any applicable user name and password.
target: Jika ingin mencetak pakai printer NetWare, berikan nama server printer NetWare (tak selalu sama dengan nama TCP/IPnya) juga nama antrian printer yang ingin digunakan beserta nama user dan katasandinya.

en: To print to a SMB printer, you need to provide the SMB host name (Note! It may be different from its TCP/IP hostname!) and possibly the IP address of the print server, as well as the share name for the printer you wish to access and any applicable user name, password, and workgroup information.
target: Untuk mencetak ke printer SMB, berikan nama host SMB (Catatan! Mungkin berbeda dengan nama host TCP/IP) dan mungkin alamat IP server printer, nama share printer yang ingin Anda akses, juga nama user, katasandi, dan info workgroup.

en: To print to a TCP or socket printer, you need to provide the host name of the printer and optionally the port number. On HP JetDirect servers the port number is usually 9100, on other servers it can vary. See the manual of your hardware.
target: Untuk mencetak ke printer soket, berikan nama host printer (dan nomor portnya). Nomor port server HP JetDirect biasanya 9100, server lain bervariasi. Lihat manual perangkat keras Anda.

en: To use a remote lpd printer, you need to supply the hostname of the printer server and the printer name on that server.
target: Untuk memakai printer lpd remote, berikan nama host
    server printer dan nama printer di server tsb.

en: To use this saved packages selection, boot installation with ``linux defcfg=floppy''
target: Untuk menggunakan pilihan paket yang sudah disimpan sebelumnya, bootlah instalasi dengan pilihan ''linux defcfg=floppy''

en: Toggle between flat and group sorted
target: Togel tampilan rata dan terurut grupnya

en: Toggle to expert mode
target: Ubah ke modus ahli

en: Toggle to normal mode
target: Ubah ke modus normal

en: Tools for your Palm Pilot or your Visor
target: Tool untuk Palm Pilot ataupun Visor

en: Tools to create and burn CD's
target: Tool untuk membuat dan memburn CD

en: Tools to ease the configuration of your computer
target: Tools untuk memudahkan konfigurasi komputer.

en: Total Progress
target: Total Kemajuan

en: Total size: %d / %d MB
target: Ukuran total: %d / %d MB

en: Track network card id (usefull for laptops)
target: Lacak ID kartu network (berguna di laptop)

en: Traditional Gtk+ Monitor
target: Monitor Biasa Gtk+

en: Traditional Monitor
target: Monitor Biasa

en: Transfer printer configuration
target: Transfer konfigurasi printer

en: Transferring %s ...
target: Pemindahan %s ...

en: Transform your machine into a powerful server with just a few clicks of the mouse: Web server, email, firewall, router, file and print server, ...
target: Jadikan mesin Anda server powerful dengan hanya beberapa klik mouse: server Web, email, firewall, router, server file dan cetak, ...

en: True Type fonts installation
target: Instalasi font True Tupe

en: True Type install done
target: Instalasi True Type selesai

en: Truly minimal install (especially no urpmi)
target: Sungguh instalasi minimal (khususnya tanpa urpmi)

en: Trying to rescue partition table
target: Sedang mencoba menyelamatkan tabel partisi

en: Turkish (modern "Q" model)
target: Turki (model "Q" modern)

en: Turkish (traditional "F" model)
target: Turki (model "F" tradisional)

en: Type
target: Tipe

en: Type of install
target: Tipe instalasi

en: Type:
target: Tipe:

en: Type:
target: Tipe:

en: UK keyboard
target: Keyboard UK

en: US keyboard
target: Keyboard US

en: US keyboard (international)
target: Keyboard US (internasional)

en: USA (bcast)
target: AS (siaran)

en: USA (cable)
target: AS (kabel)

en: USA (cable-hrc)
target: AS (kabel-hrc)

en: USB printer \/*%s
target: printer USB \/*%s

en: Ukrainian
target: Ukraina

en: Unable to start live upgrade !!!
target: Gagal memulai upgrade live !!!

en: Under Devel ... please wait.
target: Sedang dibangun ... tunggu.

en: Undo
target: Kembali

en: Uninstall Fonts
target: Buang Font

en: United States
target: Amerika Serikat

en: Unknown model
target: Model tak dikenal

en: Unsafe
target: Tak aman

en: Unselect fonts installed
target: Lepas pilih font terinstal

en: Unselected All
target: Semua tak dipilih

en: Updating package selection
target: Update pilihan paket

en: Upgrade packages only
target: Hanya upgrade paket

en: Url should begin with 'ftp:'
target: Url harus berformat 'ftp:'

en: Url should begin with 'http:'
target: Url harus berformat 'http:'

en: Use CD/DVDROM to backup
target: Pakai CD/DVDROM utk backup

en: Use FTP connection to backup
target: Pakai koneksi FTP utk backup

en: Use FTP with daemon
target: Pakai FTP dg daemon

en: Use Hard Disk to backup
target: Pakai Hard Disk utk backup

en: Use Hard Drive with daemon
target: Pakai Hard Drive dg daemon

en: Use Incremental Backups  (do not replace old backups)
target: Pakai Backup Incremental (tidak menghapus backup lama)

en: Use Xinerama extension
target: Gunakan ekstensi Xinerama

en: Use ``%s'' instead
target: Gunakan ``%s'' saja

en: Use ``Unmount'' first
target: Gunakan ``unmount'' terlebih dahulu

en: Use auto detection
target: Gunakan deteksi otomatis

en: Use daemon
target: Pakai daemon

en: Use existing partition
target: Pakai partisi yang sudah ada

en: Use fdisk
target: gunakan fdisk

en: Use for loopback
target: digunakan untuk loopback

en: Use free space
target: Pakai ruang kosong

en: Use incremental backup  (do not replace old backups)
target: Pakai backup incremental (tidak menghapus backup lama)

en: Use libsafe for servers
target: Gunakan libsafe utk server

en: Use quota for backup files.
target: Pakai quota utk file backup.

en: Use tape to backup
target: Gunakan pita utk backup

en: Use the %c and %c keys for selecting which entry is highlighted.
target: Gunakan tombol %c dan %c untuk memilih entri yang disorot

en: Use the Windows partition for loopback
target: Gunakan partisi windows untuk loopback

en: Use the free space on the Windows partition
target: Pakai ruang kosong pada partisi windows

en: User interfaces
target: Antarmuka user

en: User list to restore (only the most recent date per user is important)
target: Daftar user simpan ulang (hanya tanggal terakhir per user yg penting)

en: User name
target: Nama user

en: Users
target: User

en: Utilities
target: Peralatan

en: Various
target: Macam-macam

en: Version: %s
target: Versi: %s

en: Vertical refresh rate
target: Laju refresh vertikal

en: Video mode
target: Mode video

en: Video players and editors
target: Editor dan Player Video

en: Vietnamese "numeric row" QWERTY
target: Vietnam "numeric row" QWERTY

en: View Backup Configuration.
target: Lihat Konfigurasi Backup.

en: WARNING!
    
    DrakX will now resize your Windows partition. Be careful:
    this operation is dangerous. If you have not already done
    so, you should first exit the installation, run scandisk
    under Windows (and optionally run defrag), then restart the
    installation. You should also backup your data.
    When sure, press Ok.
target: AWAS!
    
    DrakX sekarang hendak mengubah ukuran partisi Mindows Anda. Hati-hati:
    proses ini amat berbahaya. Bila Anda belum melakukannya, silakan
    keluar dari proses instalasi ini, lalu reboot ke windows
    jalankan scandisk (dan defrag juga) di partisi ini lalu backup datanya.
    Setelah yakin, tekan Ok.

en: WARNING: This device has been previously configured to connect to the Internet.
    Simply accept to keep this device configured.
    Modifying the fields below will override this configuration.
target: AWAS: device ini sebelumnya telah dikonfigurasikan untuk terhubung ke Internet.
    Tekan OK untuk tetap menggunakan konfigurasi lama.
    Bila ingin menggantinya, silakan ganti isi pada kolom-kolom di konfigurasi ini.

en: Wait please
target: Tunggu

en: Warning
target: Awas

en: Warning! An existing firewalling configuration has been detected. You may need some manual fix after installation.
target: Awas! Ada konfigurasi firewall yang sudah ada nih. Anda nanti perlu mengecek dan membetulkan dengan cara manual setelah instalasi.

en: Warning, another Internet connection has been detected, maybe using your network
target: Awas, koneksi Internet lain terdeteksi, mungkin memakai jaringan Anda

en: Warning, the network adapter (%s) is already configured.
    
    Do you want an automatic re-configuration?
    
    You can do it manually but you need to know what you're doing.
target: Awas, adaptor network (%s) telah terkonfigurasikan.
    
    Anda ingin konfigurasi ulang otomatis?
    
    Anda dapat melakukannya secara manual tapi Anda perlu tahu yg Anda kerjakan.

en: Warning: testing this graphic card may freeze your computer
target: Awas: tes kartu grafis ini dapat membekukan komputer Anda

en: We are now going to configure the %s connection.
target: Kita akan mengkonfigurasi koneksi %s.

en: We'll now ask you questions about which services you'd like to allow
    the Internet to connect to.  Please think carefully about these
    questions, as your computer's security is important.
    
    Please, if you're not currently using one of these services, firewall
    it off.  You can change this configuration anytime you like by
    re-running this application!
target: Sekarang saya akan tanyakan layanan mana saja yang hendak Anda bolehkan
    untuk dapat diakses dari Internet. Silakan fikirkan dulu masak-masak akan
    hal ini, karena keamanan komputer Anda sangat penting kan.
    
    Ayo, bila Anda tidak pakai layanan-layanan ini, matikan saja lewat firewall.
    Anda bisa ubah konfigurasikan lagi kapan-kapan dengan menjalankan
    aplikasi ini lagi nantinya.

en: Web/FTP
target: Server, Web/FTP

en: Welcome To Crackers
target: Selamat Datang di Crackers

en: Welcome to %s
target: Selamat Datang di %s

en: Welcome to %s the operating system chooser!
    
    Choose an operating system in the list above or
    wait %d seconds for default boot.
target: Selamat datang di Sang Pemilih Sistem Operasi, %s!
    
    pilih sistem operasi pada daftar di atas atau tunggu %d detik untuk boot ke default.

en: Welcome to GRUB the operating system chooser!
target: Selamat datang di sang pemilih sistem operasi, GRUB

en: Welcome to The Network Configuration Wizard
    
    We are about to configure your internet/network connection.
    If you don't want to use the auto detection, deselect the checkbox.
target: Selamat Datang di Wizard Koneksi Jaringan
    
    Sekarang kita akan mengkonfigurasikan internet/jaringan.
    Bila Anda tidak mau menggunakan deteksi otomatis, mohon untuk tidak memilih checkbox.

en: Welcome to the Internet Connection Sharing utility!
    
    %s
    
    Click on Configure to launch the setup wizard.
target: Selamat datang di utiliti Internet Connection Sharing!
    
    %s
    
    Silakan pencet Konfigurasikan untuk mulai.

en: Welcome to the Open Source world
target: Selamat datang di dunia Source Terbuka

en: Welcome to the mail/SMS configuration utility.
    
    Here, you'll be able to set up the alert system.
target: Selamat datang di konfigurator mail/SMS.
    
    Anda dapat mengeset sistem peringatan.

en: Welcome to the proxy configuration utility.
    
    Here, you'll be able to set up your http and ftp proxies
    with or without login and password
target: Selamat datang di konfigurator proxy.
    
    Anda dapat mengeset proxy http/ftp dengan/tanpa login dan katasandi

en: West Europe
target: Eropa Barat

en: What
target: Apa

en: What do you want to do?
target: Apa yang akan Anda mau?

en: What is the root partition (/) of your system?
target: Manakah partisi root (/) di sistem Anda?

en: What kind is your ISDN connection?
target: Tipe koneksi ISDN apa yang Anda miliki?

en: What kind of card do you have?
target: Tipe card mana yang Anda punya?

en: What type of partitioning?
target: Tipe partisi apa yang hendak digunakan?

en: Wheel
target: wheel

en: When
target: Kapan

en: Where
target: Mana

en: Where do you want to install the bootloader?
target: Bootloader akan diinstall di mana?

en: Where do you want to mount device %s?
target: Mount device %s akan di mount ke mana?

en: Where do you want to mount loopback file %s?
target: Device loopback %s akan di mount ke mana?

en: Which %s driver should I try?
target: Driver %s mana yang hendak saya coba?

en: Which ISDN configuration do you prefer?
    
    * The Old configuration uses isdn4net. It contains powerfull
      tools, but is tricky to configure, and not standard.
    
    * The New configuration is easier to understand, more
      standard, but with less tools.
    
    We recommand the light configuration.
target: Konfigurasi ISDN mana yg Anda suka?
    
    * Konfigurasi lama menggunakan isdn4net, berisi alat perkasa,
      tetapi tricky bagi pemula, dan tidak standar.
    
    * Konfigurasi baru lebih mudah dimengerti, lebih standar,
      tapi dg alat lebih sedikit.
    
    Kami sarankan konfigurasi ringan.

en: Which configuration of XFree do you want to have?
target: Konfigurasi XFree mana yang Anda inginkan?

en: Which dhcp client do you want to use?
    Default is dhcpcd
target: Klien dhcp mana yang ingin Anda pakai?
    defaultnya adalah dhcpcd

en: Which disk do you want to move it to?
target: Disk mana yang hendak dipindah?

en: Which filesystem do you want?
target: Filesystem apa yang Anda inginkan?

en: Which installation class do you want?
target: Kelas instalasi yang anda diinginkan?

en: Which is your ISDN card ?
target: Manakah card ISDN Anda?

en: Which is your timezone?
target: Pilih timezone Anda

en: Which partition do you want to resize?
target: partisi mana yang mau Anda ubah ukurannya?

en: Which partition do you want to use for Linux4Win?
target: Partisi mana yang hendak dipakai oleh Linux4Win?

en: Which printer model do you have?
target: Anda punya model printer mana?

en: Which printing system (spooler) do you want to use?
target: Sistem (spooler) printer mana yang ingin digunakan?

en: Which protocol do you want to use ?
target: Protokol apa yang ingin Anda gunakan?

en: Which sector do you want to move it to?
target: Sektor mana yang hendak dipindah

en: Which size do you want to keep for windows on
target: Tentukan ukuran untuk menyimpan windows

en: Which type of entry do you want to add?
target: Tipe entri mana yang hendak ditambahkan

en: With X
target: Dengan X

en: With basic documentation (recommended!)
target: Dengan dokumentasi dasar (disarankan!)

en: With this option you will be able to restore any version
     of your /etc directory.
target: Dengan opsi ini Anda dapat menyimpan ulang semua versi direktori /etc.

en: With this security level, the use of this system as a server becomes possible.
    The security is now high enough to use the system as a server which accept
    connections from many clients. Note: if your machine is only a client on the Internet, you should better choose a lower level.
target: Dengan level sekuriti ini, sistem akan dapat digunakan sebagai server.
    Sekuriti kini cukup tinggi untuk dapat melayani koneksi banyak klien.
    Jika mesin Anda hanya berfungsi sebagai klien, pilihlah level lebih rendah.

en: Wizard Configuration
target: Konfigurasi Dukun

en: Would you like to configure printing?
target: Ingin konfigurasi printer?

en: Would you like to learn Linux simply, quickly, and for free? MandrakeSoft provides free Linux training, as well as a way to test your progress, at MandrakeCampus -- our online training center
target: Inginkah Anda belajar Linux secara mudah, cepat dan gratis? MandrakeSoft menyediakan training Linux gratis, beserta cara mentes kemajuan Anda, di KampusMandrake -- pusat training online kami

en: X (for X Window System) is the heart of the GNU/Linux graphical interface
    on which all the graphical environments (KDE, GNOME, AfterStep,
    WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX
    will try to configure X automatically.
    
    It is extremely rare for it to fail, unless the hardware is very old (or
    very new). If it succeeds, it will start X automatically with the best
    resolution possible, depending on the size of the monitor. A window will
    then appear and ask you if you can see it.
    
    If you are doing an "Expert" installation, you will enter the X
    configuration wizard. See the corresponding section of the manual for more
    information about this wizard.
    
    If you can see the message during the test, and answer "Yes", then DrakX
    will proceed to the next step. If you cannot see the message, it simply
    means that the configuration was wrong and the test will automatically end
    after 10 seconds, restoring the screen.
target: X (Sistem Window X) adalah jantung antarmuka grafis GNU/Linux tempat sandar
    semua lingkungan grafis (KDE, Gnome, AfterStep, WindowMaker...) Mandrake
    Linux. Di sini DrakX akan mencoba mengkonfigurasi X secara otomatis.
    
    Jarang sekali gagal, kecuali jika hardware amat kuno (atau amat baru). Jika
    sukses, X otomatis dijalankan dg resolusi terbaik sesuai ukuran monitor.
    Window akan muncul dan bertanya apakah Anda dapat melihatnya.
    
    Jika Anda melakukan instal "Ahli", Anda akan memasuki wizard konfigurasi
    X. Lihat bab yg bersangkutan di manual utk info lanjut ttg wizard ini.
    
    Jika Anda dapat melihat pesan dan menjawab "Ya", DrakX akan maju ke tahap
    berikut. Jika Anda tak dapat melihat pesan, berarti konfigurasi salah dan
    10 detik kemudian tes otomatis berakhir dg kembali ke layar semula.

en: X at startup
target: X saat startup

en: X driver
target: Driver X

en: X server
target: Server X

en: XFree %s with 3D hardware acceleration
target: XFree %s dengan akselerasi hardware 3D

en: XFree %s with EXPERIMENTAL 3D hardware acceleration
target: XFree %s dengan akselerasi hardware 3D PERCOBAAN

en: XFree configuration
target: Konfigurasi XFree

en: XFree86 driver: %s
target: Driver XFree86: %s

en: XFree86 server: %s
target: Server XFree86: %s

en: XFree86 server: %s
target: Server XFree86: %s

en: Xpmac (installation display driver)
target: Xpmac (instalasi driver display)

en: Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot
    either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,
    these other operating systems are correctly detected and installed. If this
    is not the case, you can add an entry by hand in this screen. Be careful to
    choose the correct parameters.
    
    Yaboot's main options are:
    
     * Init Message: a simple text message displayed before the boot prompt;
    
     * Boot Device: indicates where you want to place the information required
    to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier
    to hold this information;
    
     * Open Firmware Delay: unlike LILO, there are two delays available with
    yaboot. The first delay is measured in seconds and at this point, you can
    choose between CD, OF boot, MacOS or Linux;
    
     * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.
    After selecting Linux, you will have this delay in 0.1 second before your
    default kernel description is selected;
    
     * Enable CD Boot?: checking this option allows you to choose ``C'' for CD
    at the first boot prompt;
    
     * Enable OF Boot?: checking this option allows you to choose ``N'' for Open
    Firmware at the first boot prompt;
    
     * Default OS: you can select which OS will boot by default when the Open
    Firmware Delay expires.
target: Yaboot adalah pemuat boot utk hardware NewWorld MacIntosh. Ia mampu memboot
    GNU/Linux, MacOS maupun MacOSX jika terdapat di komputer Anda. Biasanya,
    OS lain ini terdeteksi dan terinstal dengan benar. Jika tidak, Anda dapat
    menambahkan entry secara manual di layar ini. Hati-hati memilih parameter.
    
    Opsi utama yaboot adalah:
    
     * Pesan Awal: pesan teks yang ditampilkan sebelum prompt boot.
    
     * Device Boot: menunjukkan tempat Anda ingin meletakkan info yg diperlukan
    utk memboot GNU/LInux. Biasanya Anda men-setup partisi bootstrap lebih dulu
    untuk menyimpan informasi ini.
    
     * Delay Open Firmware: tak seperti LILO, ada dua macam delay tersedia di
    yaboot. Delay pertama diukur dalam detik dan di sini Anda bisa memilih CD,
    boot OF, MacOS, atau Linux.
    
     * Timeout Boot Kernel: timeout ini mirip delay boot LILO. Setelah memilih
    Linux, akan ada delay 0.1 detik sebelum kernel default Anda dipilih.
    
     * Aktifkan boot CD?: opsi ini memungkinkan Anda memilih "C" (CD) pada
    prompt boot pertama.
    
     * Aktifkan boot OF?: dg opsi ini Anda bisa memilih "N" (Open Firmware)
    saat prompt boot pertama.
    
     * OS Standar: Anda dapat memilih OS yang akan diboot secara default saat
    delay Open Firmware terlampaui.

en: Yaboot mode
target: mode Yaboot

en: Yes
target: Ya

en: Yes (allow this through the firewall)
target: Ya (izinkan ini melewati firewall)

en: Yes I need DHCP
target: Ya, perlu DHCP

en: Yes I need NTP
target: Ya, perlu NTP

en: Yes, I want autologin with this (user, desktop)
target: Ya, saya mau autologin dg (user,desktop) ini

en: You appear to be running a 2.2 kernel.  If your network IP
    is automatically set by a computer in your home or office 
    (dynamically assigned), we need to allow for this.  Is
    this the case?
target: Wah, Anda pakai kernel 2.2 yah... Bila IP jaringan Anda diset sendiri
    oleh komputer di kantor atau rumah (secara dinamis)
    maka kita harus jawab YA di sini. Benar tak demikian?

en: You appear to have an OldWorld or Unknown
     machine, the yaboot bootloader will not work for you.
    The install will continue, but you'll
     need to use BootX to boot your machine
target: Nampaknya Anda punya mesin DuniaLama/TakJelas.
    Bootloader yaboot takkan bekerja.
    Instal akan berlanjut, tapi Anda perlu memakai
    BootX utk mem-boot mesin Anda

en: You are about to configure an Auto Install floppy. This feature is somewhat dangerous and must be used circumspectly.
    
    With that feature, you will be able to replay the installation you've performed on this computer, being interactively prompted for some steps, in order to change their values.
    
    For maximum safety, the partitioning and formatting will never be performed automatically, whatever you chose during the install of this computer.
    
    Do you want to continue?
target: Konfigurasi disket Instalasi Otomatis akan dilakukan. Fitur ini agak berbahaya dan harus hati-hati digunakan.
    
    Dg fitur ini, Anda akan dapat mengulang instalasi yang Anda terapkan pada komputer ini, sementara pada beberapa tahapan akan ada pertanyaan interaktif untuk mengubah nilainya.
    
    Utk keamanan maximum, proses partisi dan format takkan pernah dijalankan
    secara otomatis, apapun yg Anda pilih selama instalasi komputer ini.
    
    Jalan terus?

en: You are about to configure your computer to share its Internet connection.
    With that feature, other computers on your local network will be able to use this computer's Internet connection.
    
    Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN).
target: Komputer ini bisa dikonfigurasikan agar bisa membagi koneksi Internetnya.
    Dengan cara ini, komputer lain di jaringan lokal bisa menggunakn koneksi
    Internet milik komputer ini.
    
    Perhatikan: Anda mesti punya adapter jaringan untuk mensetup Local Area Network (LAN).

en: You are about to install the printing system %s on a system running in the %s security level.
    
    This printing system runs a daemon (background process) which waits for print jobs and handles them. This daemon is also accessable by remote machines through the network and so it is a possible point for attacks. Therefore only a few selected daemons are started by default in this security level.
    
    Do you really want to configure printing on this machine?
target: Anda akan menginstal sistem cetak %s di sistem dg level keamanan %s.
    
    Sistem cetak ini menjalankan daemon (proses background) yang menunggu dan memproses job cetak. Daemon ini juga dapat diakses oleh mesin remote via network jadi ia juga bisa jadi sasaran serangan. Karenanya hanya sedikit daemon terpilih yg dijalankan dlm level sekuriti ini.
    
    Benarkah Anda ingin mengkonfigurasikan printer di mesin ini?

en: You are configuring an OKI laser winprinter. These printers
    use a very special communication protocol and therefore they work only when connected to the first parallel port. When your printer is connected to another port or to a print server box please connect the printer to the first parallel port before you print a test page. Otherwise the printer will not work. Your connection type setting will be ignored by the driver.
target: Anda sedang melakukan konfigurasi winprinter laser OKI. Printer ini memakai protokol komunikasi khusus dan karenanya bekerja hanya saat terhubung port paralel pertama. Bila printer Anda terhubung dg port lain atau dengan kotak server cetak hubungkan printer dg port paralel pertama sebelum melakukan tes cetak. Jika tidak, printer takkan bekerja. Setting tipe koneksi Anda akan diabaikan oleh driver.

en: You are currently connected to internet.
target: Sekarang Anda sedang terhubung ke Internet.

en: You are currently using %s as Boot Manager.
    Click on Configure to launch the setup wizard.
target: Manajer Boot: %s. Klik Configure untuk memanggil ahli setup.

en: You are going to configure a remote printer. This needs working network access, but your network is not configured yet. If you go on without network configuration, you will not be able to use the printer which you are configuring now. How do you want to proceed?
target: Anda akan melakukan konfigurasi printer remote. Ini memerlukan akses jaringan aktif, tapi konfigurasi jaringan Anda belum ada. Jika diteruskan tanpa konfigurasi network, Anda takkan dapat menggunakan printer yang Anda konfigurasikan sekarang. Bagaimana Anda mau teruskan?

en: You are not currently connected to Internet.
target: Anda sedang tidak terhubung ke Internet.

en: You are now proposed to set up your Internet/network connection. If you
    wish to connect your computer to the Internet or to a local network, click
    "OK". The autodetection of network devices and modem will be launched. If
    this detection fails, uncheck the "Use auto detection" box next time. You
    may also choose not to configure the network, or do it later; in that case,
    simply click the "Cancel" button.
    
    Available connections are: traditional modem, ISDN modem, ADSL connection,
    cable modem, and finally a simple LAN connection (Ethernet).
    
    Here, we will not detail each configuration. Simply make sure that you have
    all the parameters from your Internet Service Provider or system
    administrator.
    
    You can consult the ``User Guide'' chapter about Internet connections for
    details about the configuration, or simply wait until your system is
    installed and use the program described there to configure your connection.
    
    If you wish to configure the network later after installation, or if you
    are finished configuring your network connection, click "Cancel".
target: Kini koneksi internet/jaringan akan disetup. Jika Anda ingin menyambung
    komputer Anda dg Internet atau jaringan lokal, klik "OK". Deteksi
    otomatis perangkat jaringan dan modem akan diluncurkan. Jika deteksi gagal,
    selanjutnya jangan tandai kotak "Pakai deteksi otomatis". Anda juga dapat
    memilih tak mengkonfigurasikan jaringan, atau mengerjakannya nanti; jika
    demikian, klik tombol "Batal".
    
    Koneksi yg tersedia adalah: modem tradisional/ISDN, hubungan ADSL, modem
    kabel, dan hubungan LAN (Ethernet).
    
    Di sini konfigurasi tak dirinci. Pastikan Anda punya semua parameter dari
    ISP atau administrator sistem.
    
    Penjelasan dapat dilihat di manual hubungan Internet. Atau tunggulah hingga
    sistem terinstal dan pakailah program yg dijelaskan utk setup koneksi.
    
    Jika Anda ingin mengkonfigurasi network pasca instalasi atau bila instalasi
    jaringan selesai, klik "Batal".

en: You can add additional entries for yaboot, either for other operating
    systems, alternate kernels, or for an emergency boot image.
    
    For other OSs, the entry consists only of a label and the "root"
    partition.
    
    For Linux, there are a few possible options:
    
     * Label: this is simply the name you will have to type at the yaboot prompt
    to select this boot option;
    
     * Image: this would be the name of the kernel to boot. Typically, vmlinux
    or a variation of vmlinux with an extension;
    
     * Root: the "root" device or ``/'' for your Linux installation;
    
     * Append: on Apple hardware, the kernel append option is used quite often
    to assist in initializing video hardware, or to enable keyboard mouse
    button emulation for the often lacking 2nd and 3rd mouse buttons on a stock
    Apple mouse. The following are some examples:
    
             video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 hda=autotune
    
             video=atyfb:vmode:12,cmode:24 adb_buttons=103,111
    
     * Initrd: this option can be used either to load initial modules, before
    the boot device is available, or to load a ramdisk image for an emergency
    boot situation;
    
     * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you
    need to allocate a large ramdisk, this option can be used;
    
     * Read-write: normally the "root" partition is initially brought up in
    read-only, to allow a file system check before the system becomes ``live''.
    Here, you can override this option;
    
     * NoVideo: should the Apple video hardware prove to be exceptionally
    problematic, you can select this option to boot in ``novideo'' mode, with
    native frame buffer support;
    
     * Default: selects this entry as being the default Linux selection,
    selectable by just pressing ENTER at the yaboot prompt. This entry will
    also be highlighted with a ``*'', if you press [Tab] to see the boot
    selections.
target: Anda dapat menambahkan entri yaboot, baik untuk OS lain, kernel lain, atau
    untuk image boot darurat.
    
    Untuk OS lain, entri hanya berisi label dan partisi root.
    
    Untuk Linux, ada beberapa pilihan:
    
     * Label: nama yg harus diketik di prompt yaboot utk memilih opsi boot ini.
    
     * Image: nama kernel untuk diboot. Biasanya bernama vmlinux atau nama lain
    yang mirip dengan vmlinux atau ditambahkan ekstensi lain.
    
     * Root: device "root" atau "/" untuk instalasi Linux Anda.
    
     * Append: pada hardware Apple, opsi append kernel sering digunakan untuk
    menolong inisialisasi hardware video, atau pengaktifan emulasi tombol mouse
    pada keyboard utk mouse Apple yang tidak memiliki tombol kedua dan ketiga.
    Berikut adalah beberapa contohnya:
    
             video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 hda=autotune
    
             video=atyfb:vmode:12,cmode:24 adb_buttons=103,111
    
     * Initrd: opsi ini bisa dipakai utk memuat modul awal sebelum device boot
    tersedia, atau untuk memuat image ramdisk untuk situasi boot darurat.
    
     * Initrd-size: standar ukuran ramdisk biasanya 4096 byte. Jika Anda perlu
    mengalokasikan ramdisk yang lebih besar, gunakan opsi ini.
    
     * Read-write: umumnya partisi "root" diberikan secara readonly agar bisa
    dilakukan pengecekan filesystem sebelum sistem "hidup". Di sini Anda bisa
    mengubah kelakuan aslinya.
    
     * NoVideo: Jika hardware video Apple problematis, Anda dapat memakai opsi
    ini utk mem-boot dalam mode "novideo", dengan support framebuffer native.
    
     * Default: opsi standar Linux, dapat dipilih hanya dg menekan ENTER pada
    prompt yaboot. Entri ini juga akan ditandai "*" jika Anda menekan [Tab]
    untuk melihat pilihan boot.

en: You can also use the graphical interface "xpdq" for setting options and handling printing jobs.
    If you are using KDE as desktop environment you have a "panic button", an icon on the desktop, labeled with "STOP Printer!", which stops all print jobs immediately when you click it. This is for example useful for paper jams.
target: Anda juga dapat memakai antarmuka grafis "xpdq" untuk setting opsi dan kontrol job cetak.
    Jika KDE Anda pakai sbg lingkungan desktop Anda punya ikon "tombol panik", di desktop, berlabel "STOP Printer!", yang menghentikan semua job cetak seketika bila Anda tekan. Ini berguna contohnya saat kertas macet.

en: You can choose other languages that will be available after install
target: Anda bisa pilih bahasa lain yang akan tersedia setelah install selesai

en: You can copy the printer configuration which you have done for the spooler %s to %s, your current spooler. All the configuration data (printer name, description, location, connection type, and default option settings) is overtaken, but jobs will not be transferred.
    Not all queues can be transferred due to the following reasons:
target: Anda dapat menyalin konfigurasi printer yg Anda buat utk spooler %s ke %s, spooler Anda sekarang. Semua data konfigurasi (nama printer, keterangan, lokasi, tipe koneksi, dan setting opsi default) disamakan, tapi job takkan ditransfer. 
    Tak semua antrian dapat ditransfer karena alasan berikut:

en: You can export using NFS or Samba. Which one do you want
target: Anda dapat mengekspor dg NFS atau Samba. Mana yg Anda ingin

en: You can now partition %s.
    When you are done, don't forget to save using `w'
target: Anda bisa buat partisi %s 
    Habis itu, jangan lupa simpan dengan menekan tombol `w'

en: You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers.
target: Anda dapat menset langsung URI utk akses printer. URI harus memenuhi spesifikasi CUPS/Foomatic. Ingat, tak semua tipe URI di-support oleh semua spooler.

en: You can't install the bootloader on a %s partition
target: Anda tak dapat menginstal bootloader pada partisi %s

en: You can't select this package as there is not enough space left to install it
target: Anda tak bisa pilih paket ini sebab tak ada ruang kosong untuk menginstallnya

en: You can't select/unselect this package
target: Anda tak bisa pilih/buang paket ini

en: You can't unselect this package. It is already installed
target: Anda tak bisa buang paket ini, sebab dia sudah diinstall

en: You can't unselect this package. It must be upgraded
target: Anda tak bisa buang paket ini. dia mesti diupgrade

en: You can't use JFS for partitions smaller than 16MB
target: JFS tak dapat dipakai utk partisi berukuran di bawah 16MB

en: You can't use ReiserFS for partitions smaller than 32MB
target: ReiserFS tak dapat dipakai utk partisi berukuran di bawah 32MB

en: You can't use a LVM Logical Volume for mount point %s
target: Anda tak dapat menggunakan LVM Logical Volume untuk titik mount %s.

en: You can't use an encrypted file system for mount point %s
target: Anda tak dapat menggunakan sistem file bersandi utk mount point %s

en: You decided to install the bootloader on a partition.
    This implies you already have a bootloader on the hard drive you boot (eg: System Commander).
    
    On which drive are you booting?
target: Anda memutuskan instalasi pemuat boot di partisi.
    Berarti Anda sudah punya pemuat boot di harddisk yang Anda boot (mis: System Commander).
    
    Di drive mana Anda boot?

en: You don't have a swap partition
    
    Continue anyway?
target: Anda belum punya partisi swap
    
    Jalan terus?

en: You don't have any configured interface.
    Configure them first by clicking on 'Configure'
target: Tiada interface terkonfigurasi.
    Konfigurasi dulu dg meng-klik 'Configure'

en: You don't have any internet connection.
    Create one first by clicking on 'Configure'
target: Tiada koneksi internet.
    Buat dulu dg meng-klik 'Configure'

en: You don't have any partitions!
target: Anda tak punya partisi!

en: You don't have enough free space on your Windows partition
target: Eh, Anda tak punya cukup ruangan pada partisi windows!

en: You have a hole in your partition table but I can't use it.
    The only solution is to move your primary partitions to have the hole next to the extended partitions
target: Anda punya tabel partisi tapi tidak bisa saya gunakan.
    Satu-satunya cara adalah memindahkan partisi primary Anda ke partisi
    extended selanjutnya

en: You have configured multiple ways to connect to the Internet.
    Choose the one you want to use.
target: Anda mengkonfigurasi bbrp jalan utk koneksi Internet.
    Pilih yg ingin Anda pakai.

en: You have more than one hard drive, which one do you install linux on?
target: Anda punya beberapa harddisk, yang mana yang ingin di-instal linux?

en: You have now the possibility to download software aimed for encryption.
    
    WARNING:
    
    Due to different general requirements applicable to these software and imposed
    by various jurisdictions, customer and/or end user of theses software should
    ensure that the laws of his/their jurisdiction allow him/them to download, stock
    and/or use these software.
    
    In addition customer and/or end user shall particularly be aware to not infringe
    the laws of his/their jurisdiction. Should customer and/or end user not
    respect the provision of these applicable laws, he/they will incure serious
    sanctions.
    
    In no event shall Mandrakesoft nor its manufacturers and/or suppliers be liable
    for special, indirect or incidental damages whatsoever (including, but not
    limited to loss of profits, business interruption, loss of commercial data and
    other pecuniary losses, and eventual liabilities and indemnification to be paid
    pursuant to a court decision) arising out of use, possession, or the sole
    downloading of these software, to which customer and/or end user could
    eventually have access after having sign up the present agreement.
    
    
    For any queries relating to these agreement, please contact 
    Mandrakesoft, Inc.
    2400 N. Lincoln Avenue Suite 243
    Altadena California 91001
    USA
target: Anda sekarang bisa mendownload software khusus untuk enkripsi.
    
    PERHATIAN:
    
    Berhubung adanya peraturan yang berbeda di berbagai lokasi berkenaan
    dengan penggunaan software ini, Anda dan/atau end user yang akan
    menggunakan software ini harus memastikan bahwa dirinya boleh untuk
    mendownload dan/atau menggunakan software ini sesuai dengan hukum
    yang berlaku di lokasinya.
    
    Juga ditekankan bahwa Anda dan/atau end user harus sadar bahwa dirinya
    tidak diperkenankan untuk melanggar hukum tersebut. Apabila melanggar
    akan dikenakan sangsi yang berat.
    
    Mandrakesoft dan para pembuat software dan/atau penyedianya sama sekali tidak
    bertanggung jawab baik untuk segala kerusakan khusus, tidak langsung, dan
    insidentil apapun (termasuk namun tidak terbatas pada kehilangan keuntungan
    gangguan bisnis, kehilangan data komersial dan kerugian lain dan 
    segala kewajiban yang harus dibayarkan sesuai hukum) yang disebabkan
    oleh penggunaan, kepemilikan, atau penjualan dari software yang
    didownload ini, setelah Anda dan/atau end user memiliki akses
    ke software tersebut setelah menandatangani perjanjian yang ada.
    
    Apabila ada pertanyaan mengenai perjanjian ini, silakan hubungi
    2400 N. Lincoln Avenue Suite 243
    Altadena California 91001
    USA

en: You have now the possibility to download updated packages that have
    been released after the distribution has been made available.
    
    You will get security fixes or bug fixes, but you need to have an
    Internet connection configured to proceed.
    
    Do you want to install the updates ?
target: Anda kini dapat men-download paket terupdate yg dirilis pasca distribusi.
    
    Anda akan mendapat pembetulan keamanan/kutu, tapi Anda perlu punya koneksi
    Internet terkonfigurasi utk melanjutkan.
    
    Ingin instal update ?

en: You have one big FAT partition
    (generally used by MicroSoft Dos/Windows).
    I suggest you first resize that partition
    (click on it, then click on "Resize")
target: Anda punya satu partisi FAT yang besar.
    (umumnya dipakai oleh wicrosoft Dos/mindows).
    Disarankan utk mengubah ukuran partisi ini
    (klik di situ, lalu pilih "Ubah ukuran")

en: You have selected the following server(s): %s
    
    
    These servers are activated by default. They don't have any known security
    issues, but some new could be found. In that case, you must make sure to upgrade
    as soon as possible.
    
    
    Do you really want to install these servers?
target: Anda memilih server berikut: %s
    
    Server ini aktif sesuai standar. Sementara ini tiada kabar ttg sekuritas,
    tapi mungkin ada yg telah ditemukan. Jika terjadi, upgrade-lah selekas mungkin.
    
    Jadi instal server ini?

en: You have space on your disk for only %d%% of these packages.
    
    If you wish to install less than this,
    select the percentage of packages that you want to install.
    A low percentage will install only the most important packages;
    a percentage of %d%% will install as many packages as possible.
target: Anda punya hard disk cuma cukup untuk sekitar %d%% dari seluruh paketini.
    
    Kalau Anda mau nginstall dengan ukuran yang lebih kecil dari ini,
    pilih dulu persentase paket yang hendak diinstall.
    Persentasi kecil berarti akan install paket yang penting-penting saja;
    dan sebaliknya persentase %d%% akan install paket yang tadi sudah
    dipilih sebanyak-banyaknya

en: You have transferred your former default printer ("%s"), Should it be also the default printer under the new printing system %s?
target: Anda telah men-transfer printer standar lama Anda ("%s"), Akankah ia juga dijadikan printer default pada sistem cetak baru %s?

en: You haven't selected any group of packages.
    Please choose the minimal installation you want:
target: Anda belum memilih grup paket.
    Pilih instalasi minimal yang Anda ingin:

en: You may need to change your Open Firmware boot-device to
     enable the bootloader.  If you don't see the bootloader prompt at
     reboot, hold down Command-Option-O-F at reboot and enter:
     setenv boot-device %s,\\:tbxi
     Then type: shut-down
    At your next boot you should see the bootloader prompt.
target: Gantilah bootdevice Open Firmware untuk mengaktifkan bootloader.
     Jika Anda tak melihat prompt bootloader saat reboot, tekan
     Command-Option-O-F saat reboot dan ketik:
     setenv boot-device %s,\\:tbxi
     kemudian: shut-down
    Anda akan melihat prompt bootloader pada boot selanjutnya.

en: You may now choose which services you wish to start at boot time.
    
    Here are presented all the services available with the current
    installation. Review them carefully and uncheck those which are not always
    needed at boot time.
    
    You can get a short explanatory text about a service by selecting a
    specific service. However, if you are not sure whether a service is useful
    or not, it is safer to leave the default behavior.
    
    !! At this stage, be very careful if you intend to use your machine as a
    server: you will probably not want to start any services which you do not
    need. Please remember that several services can be dangerous if they are
    enabled on a server. In general, select only the services you really need.
    !!
target: Kini Anda boleh pilih servis mana yang dijalankan saat boot.
    
    Di sini ditampilkan semua servis yg tersedia di instalasi ini. Periksa dg
    baik dan jangan tandai servis yg tak selalu diperlukan saat boot.
    
    Ada penjelasan singkat bila suatu servis dipilih. Tapi jika Anda tak yakin
    kegunaan servis tsb., lebih aman tak usah diusik.
    
    Pada tahap ini, hati-hati jika Anda bermaksud menjadikan mesin Anda sebuah
    server: Anda mungkin tak ingin menjalankan servis yg tak diperlukan. Ingat,
    bbrp servis bisa berbahaya jika dijalankan. Secara umum, pilihlah hanya
    servis yang benar-benar Anda perlukan.

en: You may now provide its options to module %s.
    Note that any address should be entered with the prefix 0x like '0x123'
target: Anda dapat memberikan opsi terhadap modul %s.
    Ingat, semua alamat harus diisikan dengan awalan 0x misalnya '0x123'

en: You may now provide its options to module %s.
    Options are in format ``name=value name2=value2 ...''.
    For instance, ``io=0x300 irq=7''
target: Silakan beri parameter untuk modul %s ini.
    Parameter biasanya dalam format ``nama=nilai nama2=nilai2...''.
    Misalnya, ``io=0x300 irq=8''

en: You must also format %s
target: Anda harus juga memformat %s

en: You must choose/enter a printer/device!
target: Pilih/masukkan printer/alat!

en: You must enter a device or file name!
target: Masukkan nama alat atau file!

en: You must have a FAT partition mounted in /boot/efi
target: Anda harus punya partisi FAT termount pada /boot/efi

en: You must have a root partition.
    For this, create a partition (or click on an existing one).
    Then choose action ``Mount point'' and set it to `/'
target: Pilih dulu partisi rootnya.
    Caranya, buatlah partisi (atau pilih di yang sudah ada).
    Lalu pilih ``Mount point'' dan set ke `/'

en: You must have a swap partition
target: Anda harus buat partisi swap

en: You must indicate where you wish to place the information required to boot
    to GNU/Linux.
    
    Unless you know exactly what you are doing, choose "First sector of drive
    (MBR)".
target: Anda harus menentukan tempat meletakkan info boot GNU/Linux.
    
    
    Kalau Anda kurang tahu, pilih saja "Sektor pertama di drive (MBR)".

en: You must specify a kernel image
target: Anda harus tentukan image kernel

en: You must specify a root partition
target: Anda harus tentukan partisi swap

en: You need a true filesystem (ext2, reiserfs) for this mount point
target: Anda perlu filesystem yg benar (ext2, reiserfs) utk titik mount ini

en: You need to reboot for the partition table modifications to take place
target: Anda harus reboot agar perubahan table partisi dapat berlaku

en: You will be able to choose them more specifically in the next step.
target: Anda akan bisa memilih dengan lebih lengkap nanti

en: You will receive an alert if one of the selected service is no more running
target: Anda akan menerima peringatan bila salah satu servis terpilih terhenti

en: You will receive an alert if the load is higher than this value
target: Anda akan diperingatkan jika muatan lebih tinggi daripada nilai ini

en: You'll need to reboot before the modification can take place
target: Anda harus reboot agar perubahan tabel partisi dapat berlaku

en: You've selected a software RAID partition as root (/).
    No bootloader is able to handle this without a /boot partition.
    So be careful to add a /boot partition
target: Anda memilih partisi RAID software sebagai root (/).
    Sekarang bootloader tak ada yang bisa handel tanpa partisi /boot.
    Jadi hati-hati dalam menambahkan partisi /boot

en: Your HP multi-function device was configured automatically to be able to scan. Now you can scan from the command line with "ptal-hp %s scan ...". Scanning via a graphical interface or from the GIMP is not supported yet for your device. More information you will find in the "/usr/share/doc/hpoj-0.8/ptal-hp-scan.html" file on your system. If you have an HP LaserJet 1100 or 1200 you can only scan when you have the scanner option installed.
    
    Do not use "scannerdrake" for this device!
target: Alat multifungsi HP Anda terkonfigurasi otomatis agar dapat men-scan. Kini Anda dapat men-scan dari baris perintah dg "ptal-hp %s scan ...". Scan via antarmuka grafis atau GIMP saat ini belum di-support. Info lanjutada di "/usr/share/doc/hpoj-0.8/ptal-hp-scan.html". Jika Anda punya HP LaserJet 1100 atau 1200 Anda hanya dapat men-scan jika opsi scanner terinstal.
    
    Jangan pakai "scannerdrake" utk alat ini!

en: Your HP multi-function device was configured automatically to be able to scan. Now you can scan with "scanimage" ("scanimage -d hp:%s" to specify the scanner when you have more than one) from the command line or with the graphical interfaces "xscanimage" or "xsane". If you are using the GIMP, you can also scan by choosing the appropriate point in the "File"/"Acquire" menu. Call also "man scanimage" and "man sane-hp" on the command line to get more information.
    
    Do not use "scannerdrake" for this device!
target: Alat multifungsi HP Anda terkonfigurasi otomatis agar dapat men-scan. Kini Anda dapat men-scan dg "scanimage" ("scanimage -d hp:%s" utk menentukan scanner jika Anda punya beberapa) dari baris perintah atau dg antarmuka grafis "xscanimage" atau "xsane". Jika Anda memakai GIMP, Anda dapat juga men-scan dg memilih titik yg sesuai di menu "File"/"Acquire". Panggil "man scanimage" dan "man sane-hp" di baris perintah untukinformasi lanjut.
    
    Jangan pakai "scannerdrake" utk alat ini!

en: Your Windows partition is too fragmented, please run ``defrag'' first
target: Partisi windows Anda terlalu terfragmen, jalankan ``defrag'' dulu

en: Your card can have 3D hardware acceleration support but only with XFree %s,
    NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.
    Your card is supported by XFree %s which may have a better support in 2D.
target: Kartu Anda dapat menggunakan akselerasi hardware 3D pada XFree %s,
    NAMUN INI BARU DALAM TAHAP PERCOBAAN DAN DAPAT MEMBUAT KOMPUTER ANDA HANG.
    Kartu Anda ini dapat digunakan XFree %s yang lebih baik dalam 2D.

en: Your card can have 3D hardware acceleration support but only with XFree %s.
    Your card is supported by XFree %s which may have a better support in 2D.
target: Kartu Anda punya akselerasi hardware 3D, tapi hanya bisa digunakan pada XFree %s.
    Kartu Anda ini dapat dipakai pada XFree %s yg punya dukungan baik dalam 2D.

en: Your card can have 3D hardware acceleration support with XFree %s,
    NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.
target: Kartu Anda dapat menggunakan akselerasi hardware 3D pada XFree %s,
    NAMUN INI BARU DALAM TAHAP PERCOBAAN DAN DAPAT MEMBUAT KOMPUTER ANDA HANG.

en: Your card can have 3D hardware acceleration support with XFree %s.
target: Kartu Anda dapat menggunakan akselerasi hardware 3D pada XFree %s.

en: Your choice? (0/1, default `%s')
target: Pilihan Anda? (0/1, default %s)

en: Your choice? (default %s)
target: Pilihan Anda? (default %s)

en: Your choice? (default `%s'%s)
target: Pilihan Anda? (default %s%s)

en: Your new Mandrake Linux operating system is currently being installed.
    Depending on the number of packages you will be installing and the speed of
    your computer, this operation could take from a few minutes to a
    significant amount of time.
    
    Please be patient.
target: Sistem operasi Mandrake Linux baru Anda sedang di-instal.
    Proses ini memakan waktu beberapa menit/jam, tergantung ukuran yang
    Anda install dan kecepatan komputer Anda.
    
    Sabar...

en: Your personal phone number
target: Nomor telepon Anda

en: Your printer model
target: Model printer Anda

en: Your system has not enough space left for installation or upgrade (%d > %d)
target: Sistem ini tak punya cukup space untuk install atawa upgrade (%d > %d)

en: Your system is low on resource. You may have some problem installing
    Mandrake Linux. If that occurs, you can try a text install instead. For this,
    press `F1' when booting on CDROM, then enter `text'.
target: Sumber daya sistem Anda rendah. Nantinya Anda akan sulit menginstal
    Linux-Mandrake. Cobalah instalasi text. Untuk hal ini silakan
    tekan `F1' saat booting pada CDROM, lalu ketikkan `text'.

en: Your system support multiple head configuration.
    What do you want to do?
target: Sistem Anda mendukung konfigurasi head majemuk.
    Apa yg ingin Anda lakukan?

en: Yugoslavian (latin)
target: Yugoslavia (latin)

en: access to X programs
target: akses ke program X

en: access to administrative files
target: akses ke file administratif

en: access to rpm tools
target: akses ke peralatan rpm

en: across Network
target: lewat Network

en: activate now
target: aktifkan sekarang

en: alert configuration
target: konfigurasi peringatan

en: allow "su"
target: izinkan "su"

en: apmd is used for monitoring batery status and logging it via syslog.
    It can also be used for shutting down the machine when the battery is low.
target: apmd digunakan untuk monitoring status batere dan mencatatnya di syslog.
    apmd juga bisa untuk mematikan mesin waktu baterenya habis.

en: but not matching
target: tapi bukan pencocokan

en: cable connection detected
target: Koneksi kabel terdeteksi

en: can not open /etc/inittab for reading: %s
target: gagal baca file /etc/inittab nih: %s

en: chunk size
target: ukuran chunk

en: click here if you are sure.
target: klik di sini jika Anda yakin.

en: commands before booting, or 'c' for a command-line.
target: perintah sebelum booting, atau 'c' untuk command line.

en: consolehelper missing
target: consolehelper hilang

en: could not find any font in your mounted partitions
target: tak ditemukan font di partisi termount

en: could not find any font.
target: gagal temukan font.

en: cron is a standard UNIX program that runs user-specified programs
    at periodic scheduled times. vixie cron adds a number of features to the basic
    UNIX cron, including better security and more powerful configuration options.
target: Cron adalah program UNIX standar yang menjalankan program user
    pada waktu yang terjadwal. vixie cron memiliki fitur yang lebih lengkap
    dari cron UNIX biasa, termasuk pembenahan sekuriti yang lebih baik dan
    lebih mantapnya option pada konfigurasinya.

en: daily
target: harian

en: deactivate now
target: non-aktifkan sekarang

en: detected %s
target: %s telah terdeteksi

en: detected on interface %s
target: telah dideteksi ada pada interface %s

en: detected on port %s
target: dideteksi pada port %s

en: disable
target: matikan

en: dismiss
target: tutup

en: done
target: selesai

en: enable
target: aktifkan

en: error unmounting %s: %s
target: error melepas mount %s: %s

en: ethernet card(s) detected
target: ada ethernet card yang terdeteksi

en: file list send by FTP : %s
target: daftar file dikirim oleh FTP : %s

en: files sending by FTP
target: file dikirim dg FTP

en: fsck failed with exit code %d or signal %d
target: fsck gagal dg kode keluar %d / sinyal %d

en: here if no.
target: di sini jika tidak.

en: high
target: tinggi

en: hourly
target: perjam

en: important
target: penting

en: kdesu missing
target: kdesu hilang

en: load setting
target: setting muatan

en: lpd is the print daemon required for lpr to work properly. It is
    basically a server that arbitrates print jobs to printer(s).
target: lpd adalah daemon printer yang jadi tulang punggung lpr. Dia
    bertugas sebagai server yang memberi perintah kepada printer untuk mencetak.

en: matching
target: pencocokan

en: maybe
target: hmm..

en: mkraid failed
target: mkraid gagal

en: mkraid failed (maybe raidtools are missing?)
target: mkraid gagal (mungkin raidtoolsnya tak ada?)

en: monthly
target: bulanan

en: mount failed:
target: gagal melakukan mount:

en: mounting partition %s in directory %s failed
target: penyambungan partisi %s ke direktori %s gagal

en: must have
target: harus ada

en: named (BIND) is a Domain Name Server (DNS) that is used to resolve host names to IP addresses.
target: named (BIND) adalah Domain Name Server (DNS) yang digunakan untuk menerjemahkan nama host ke IP address.

en: new
target: baru

en: nice
target: bagus

en: no available partitions
target: Tidak ada partisi

en: no fonts found
target: tiada font ditemukan

en: no help implemented yet.
target:  belom ada help-nya nih.

en: no network card found
target: Tidak ada card network ya?

en: no serial_usb found
target: tiada serial_usb

en: none
target: tiada

en: not enough room in /boot
target: Waah /boot tak cukup spacenya nih

en: on Hard Drive
target: di Hard Drive

en: on LPD server "%s", printer "%s"
target: di server LPD "%s", printer "%s"

en: on Novell server "%s", printer "%s"
target: di server Novell "%s", printer "%s"

en: on Windows server "%s", share "%s"
target: di server Windows "%s", share "%s"

en: on bus %d id %d
target: pada bus %d id %d

en: options description:
    
     - Backup system files:
           
    	This option allows you to backup your /etc directory,
    	which contains all configuration files. Please be
    	careful during the restore step to not overwrite:
    		/etc/passwd 
    		/etc/group 
    		/etc/fstab
    
     - Backup User files: 
    
    	This option allows you select all users that you want 
    	to backup.
    	To preserve disk space, it is recommended that you 
    	do not include web browser's cache.
    
     - Backup Other files: 
    
    	This option allows you to add more data to save.
    	With the other backup it's not possible at the 
    	moment to select select incremental backup.		
     
     - Incremental Backups:
    
    	The incremental backup is the most powerful 
    	option for backup. This option allows you 
    	to backup all your data the first time, and 
    	only the changed afterward.
    	Then you will be able, during the restore
    	step, to restore your data from a specified
    	date.
    	If you have not selected this option all
    	old backups are deleted before each backup.
target: penjelasan opsi:
    
     - Backup file sistem:
           
    	Opsi ini dapat mem-backup direktori /etc, yg berisi
    	semua file konfigurasi. Hati-hati saat tahap restore
    	(simpan ulang) agar tak menindih:
    		/etc/passwd 
    		/etc/group 
    		/etc/fstab
    
     - Backup file User: 
    
    	Dengan opsi ini Anda dapat memilih user yg ingin 
    	Anda backup.
    	Untuk menghemat ruang disk, cache browser web harap 
    	tak dimasukkan.
    
     - Backup file Lain: 
    
    	Opsi ini memungkinkan Anda menambah data utk disimpan.
    	Dengan backup lain-lain Anda sementara tak dapat 
    	memilih backup incremental.		
     
     - Backup Incremental:
    
    	Ini adalah opsi terkuat backup. Anda dapat mem-backup 
    	semua data pertama kali, setelah itu hanya yang berubah.
    	Kemudian Anda akan dapat, saat tahap restore, menyimpan
    	ulang data dari tanggal yg ditentukan date.
    	Jika Anda belum memilih opsi ini semua backup lama akan 
    	dihapus sebelum tiap backup.

en: options description:
    
     In this step Drakbackup allow you to change:
    
     - The compression mode:
        
          If you check bzip2 compression, you will compress
          your data better than gzip (about 2-10 %).
          This option is not checked by default because
          this compression mode needs more time ( about 1000% more).
     
     - The update mode:
    
          This option will update your backup, but this
          option is not really useful because you need to
          decompress your backup before you can update it.
          
     - the .backupignore mode:
    
          Like with cvs, Drakbackup will ignore all references
          included in .backupignore files in each directories.
          ex: 
             /*> cat .backupignore*/
             *.o
             *~
             ...
target: penjelasan opsi:
    
     Di tahap ini Drakbackup mengizinkan Anda mengubah:
    
     - Mode kompresi:
        
          Jika Anda pilih kompresi bzip2, Anda akan mengkompres
          data lebih baik daripada gzip (sekitar 2-10 %).
          Opsi ini bukan standar karena
          banyak makan waktu (sekitar 1000% lebih).
     
     - Mode update:
    
          Opsi ini akan mengupdate backup Anda, tapi tak
          benar-benar berguna karena Anda perlu
          mengurai backup Anda sebelum dapat meng-update.
          
     - mode .backupignore:
    
          Seperti cvs, Drakbackup akan mengabaikan semua referensi
          tertulis dalam file .backupignore di tiap direktori.
          mis: 
             /*> cat .backupignore*/
             *.o
             *~
             ...

en: options description:
    
    Please be careful when you are using ftp backup, because only 
    backups that are already built are sent to the server.
    So at the moment, you need to build the backup on your hard 
    drive before sending it to the server.
target: penjelasan opsi:
    
    Hati-hati menggunakan backup ftp, karena hanya backup yg telah 
    dibangun yg akan dikirim ke server. Jadi sementara Anda perlu 
    membangun backup di harddrive Anda sebelum mengirimnya ke server.

en: paranoid
target: pengecut

en: parse all fonts
target: baca semua font

en: partition %s
target: Partisi %s

en: partition %s is now known as %s
target: partisi %s sekarang jadi %s

en: password
target: katasandi

en: pfm fonts conversion
target: konversi font pfm

en: please choose the date to restore
target: pilih tanggal simpan ulang

en: please wait during ttmkfdir...
target: tunggu saat ttmkfdir...

en: please wait, parsing file: %s
target: tunggu, sedang menelaah file: %s

en: re-type password
target: tulis lagi katasandi

en: reconfigure
target: konfigurasi ulang

en: restore description:
     
    Only the most recent date will be used ,because with incremental 
    backups it is necesarry to restore one by one each older backups.
    
    So if you don't like to restore an user please unselect all his
    check box.
    
    Otherwise, you are able to select only one of this
    
     - Incremental Backups:
    
    	The incremental backup is the most powerfull 
    	option to use backup, this option allow you 
    	to backup all your data the first time, and 
    	only the changed after.
    	So you will be able during the restore
    	step, to restore your data from a specified
    	date.
    	If you have not selected this options all
    	old backups are deleted before each backup.
target: penjelasan restore:
     
    Hanya tanggal terkini yang akan dipakai, karena dg backup incremental 
    diperlukan restore satu demi satu tiap backup lama.
    
    Jadi jika Anda tak suka simpan ulang user lepaslah pilihan semua kotak
    tandanya.
    
    Jika tidak, Anda dapat memilih hanya satu opsi
    
     - Backup Incremental:
    
    	Backup incremental adalah opsi terkuat backup,
    	Anda dapat mem-backup semua data pertama kali,
    	dan kemudian hanya yg berubah.
    	Jadi Anda dapat, saat tahap restore, menyimpan
    	ulang data Anda dari tanggal yg ditentukan.
    	Jika Anda belum memilih opsi ini semua backup
    	lama akan dihapus sebelum tiap backup.

en: restrict
target: batasi

en: running
target: sedang jalan

en: search
target: cari

en: select path to restore (instead of / )
target: pilih path utk simpan ulang (selain / )

en: service setting
target: setting servis

en: simple
target: mudah

en: stopped
target: dihentikan

en: tinyfirewall configurator
    
    This configures a personal firewall for this Mandrake Linux machine.
    For a powerful dedicated firewall solution, please look to the
    specialized MandrakeSecurity Firewall distribution.
target: konfigurator tinyfirewall
    
    Program ini mengkonfigurasi firewall pribadi sistem Linux Mandrake.
    Untuk membuat solusi firewall yang lebih baik, cobalah
    distribusi Mandrake Security Firewall

en: total progess
target: total kemajuan

en: ttf fonts conversion
target: konversi font ttf

en: type1inst building
target: bangun type1inst

en: usage: keyboarddrake [--expert] [keyboard]
target: cara pakai: keyboarddrake [--expert] [keyboard]

en: use dhcp
target: gunakan dhcp

en: use pppoe
target: gunakan pppoe

en: use pptp
target: gunakan pptp

en: very nice
target: bagus deh

en: weekly
target: mingguan

en: with /usr
target: dengan /usr

en: xfs restart
target: jalankan ulang xfs
