This section will help you determine which different media types you can use to install Ubuntu. For example, if you have a floppy disk drive on your machine, it can be used to install Ubuntu. There is a whole chapter devoted to media, Chapter 4, Obtaining System Installation Media, which lists the advantages and disadvantages of each media type. You may want to refer back to this page once you reach that section.
Whenever you see “CD-ROM” in this manual, it applies to both CD-ROMs and DVD-ROMs, because both technologies are really the same from the operating system's point of view, except for some very old nonstandard CD-ROM drives which are neither SCSI nor IDE/ATAPI.
CD-ROM based installation is supported for some architectures. On machines which support bootable CD-ROMs, you should be able to do a completely floppy-less installation. Even if your system doesn't support booting from a CD-ROM, you can use the CD-ROM in conjunction with the other techniques to install your system, once you've booted up by other means; see Chapter 5, Booting the Installation System.
SCSI, SATA and IDE/ATAPI CD-ROMs are supported. The Linux CD-ROM HOWTO contains in-depth information on using CD-ROMs with Linux.
USB CD-ROM drives are also supported, as are FireWire devices that are supported by the ohci1394 and sbp2 drivers.
Booting the installation system directly from a hard disk is another option for many architectures. This will require some other operating system to load the installer onto the hard disk.
Many Ubuntu boxes need their floppy and/or CD-ROM drives only for setting up the system and for rescue purposes. If you operate some servers, you will probably already have thought about omitting those drives and using an USB memory stick for installing and (when necessary) for recovering the system. This is also useful for small systems which have no room for unnecessary drives.
The network can be used during the installation to retrieve files needed for the installation. Whether the network is used or not depends on the installation method you choose and your answers to certain questions that will be asked during the installation. The installation system supports most types of network connections (including PPPoE, but not ISDN or PPP), via either HTTP or FTP. After the installation is completed, you can also configure your system to use ISDN and PPP.
You can also boot the installation system over the network.
Diskless installation, using network booting from a local area network and NFS-mounting of all local filesystems, is another option.
If you are running another Unix-like system, you could use it to install
Ubuntu without using the debian-installer described in the rest of this
manual. This kind of install may be useful for users with otherwise
unsupported hardware or on hosts which can't afford downtime. If you
are interested in this technique, skip to the Section D.4, “Installing Ubuntu from a Unix/Linux System”.
The Ubuntu boot disks contain a kernel which is built to maximize the number of systems it runs on. Unfortunately, this makes for a larger kernel, which includes many drivers that won't be used for your machine (see Section 8.6, “Compiling a New Kernel” to learn how to build your own kernel). Support for the widest possible range of devices is desirable in general, to ensure that Ubuntu can be installed on the widest array of hardware.
Generally, the Ubuntu installation system includes support for floppies, IDE (also known as PATA) drives, IDE floppies, parallel port IDE devices, SATA and SCSI controllers and drives, USB, and FireWire. The supported file systems include FAT, Win-32 FAT extensions (VFAT) and NTFS.
Disk interfaces that emulate the “AT” hard disk interface — often called MFM, RLL, IDE, or PATA — are supported. SATA and SCSI disk controllers from many different manufacturers are supported. See the Linux Hardware Compatibility HOWTO for more details.