Date: Thu, 10 Mar 94 04:30:01 PST
From: Advanced Amateur Radio Networking Group <tcp-group@ucsd.edu>
Errors-To: TCP-Group-Errors@UCSD.Edu
Reply-To: TCP-Group@UCSD.Edu
Precedence: Bulk
Subject: TCP-Group Digest V94 #64
To: tcp-group-digest


TCP-Group Digest            Thu, 10 Mar 94       Volume 94 : Issue   64

Today's Topics:
                Kantronics Data Engine <--> Kiss mode
                              What next?

Send Replies or notes for publication to: <TCP-Group@UCSD.Edu>.
Subscription requests to <TCP-Group-REQUEST@UCSD.Edu>.
Problems you can't solve otherwise to brian@ucsd.edu.

Archives of past issues of the TCP-Group Digest are available
(by FTP only) from UCSD.Edu in directory "mailarchives".

We trust that readers are intelligent enough to realize that all text
herein consists of personal comments and does not represent the official
policies or positions of any party.  Your mileage may vary.  So there.
----------------------------------------------------------------------

Date: Wed, 9 Mar 94 14:53:51 PST
From: srbible@cs.nps.navy.mil (Steven Bible)
Subject: Kantronics Data Engine <--> Kiss mode
To: tcp-group@ucsd.edu

How do you get the Kantronics Data Engine into Kiss mode for TCP/IP?
I have tried INTERFACE KISS and RESET but the DE will transmit but 
not listen properly.  I cannot get anymore out of the documents.
What am I missing. I am using NOS_1229.EXE PA0GRI version.  

Thanks, Steve N7HPR


------------------------------------------------------------------------
Steven R. Bible, LT, USN       Home Phone: (408) 644-0305
SMC #1214         Work Phone: (408) 656-2174
Naval Postgraduate School             DSN:       868-2174
Monterey, California  93943  internet: srbible@cs.nps.navy.mil
      amprnet: N7HPR@K6LY.#NOCAL.CA.USA.NOAM

------------------------------

Date: Wed, 9 Mar 94 20:23 PST
From: wi7c@speedway.net (KC)
Subject: What next?
To: tcp-group@UCSD.EDU

Hi TCP Gurus -
   I have my two computers tied together with a simple
null-modem cable via COM1 and want to use KA9Q NOS to
communicate between the two using SLIP. I have tried
configuring the two ports with the ATTACH and IFCONFIG
commands, but cannot get the two to talk to each other.
   I am using KA9Q NOS (PA0GRI v2.0p). Any suggestions?
   Thanks.
   KC Alewine, WI7C
   South Lake Tahoe, CA


-- 
KC on Speedway Free Access -- (10288)-1-503-520-2222
wi7c@speedway.net

------------------------------

End of TCP-Group Digest V94 #64
******************************
******************************