Date: Sun, 11 Jul 93 04:30:10 PDT
From: Advanced Amateur Radio Networking Group <tcp-group@ucsd.edu>
Errors-To: TCP-Group-Errors@UCSD.Edu
Reply-To: TCP-Group@UCSD.Edu
Precedence: Bulk
Subject: TCP-Group Digest V93 #177
To: tcp-group-digest


TCP-Group Digest            Sun, 11 Jul 93       Volume 93 : Issue  177

Today's Topics:
                         MMT 432 - 56kb modem
                              Subscribe
                     Undeliverable Mail (2 msgs)

Send Replies or notes for publication to: <TCP-Group@UCSD.Edu>.
Subscription requests to <TCP-Group-REQUEST@UCSD.Edu>.
Problems you can't solve otherwise to brian@ucsd.edu.

Archives of past issues of the TCP-Group Digest are available
(by FTP only) from UCSD.Edu in directory "mailarchives".

We trust that readers are intelligent enough to realize that all text
herein consists of personal comments and does not represent the official
policies or positions of any party.  Your mileage may vary.  So there.
----------------------------------------------------------------------

Date: Sun, 11 Jul 93 0:31:09 MET DST
From: bsm@sun10.etab.se (Bosse Strinnholm)
Subject: MMT 432 - 56kb modem
To: tcp-group@ucsd.edu

I got a Microwave Modules 432Mhz SSB Transverter which generates a
lot of DCD falsing to my 56kbs modem. 
I guess I need some kind of filter to cure this.

Has anyone out there had the same problem?
What kind of filter is needed? Model? Prices?

The assembly description for the 56kb modem states that the transverter 
must be configured for LOW POWER input by installing a jumper.
As I lack all instructions for the transverter I need to know where to 
install that jumper. 

Please respond by email.

bosse

------
bsm@sun10.etab.se 

------------------------------

Date: Sat, 10 Jul 1993 12:10:34 -0600
From: denali!davis (Glenn Davis)
Subject: Subscribe
To: tcp-group@UCSD.EDU

Hi, please add me to this mailing list as: Glenn Davis (davis@realtime.ab.ca)

I just discovered that this list existed.  The lucky event was related to
a problem with TheNet X1H.  I was refered to a patch that looks like it
will fix the problem we are having.

On a related note, I wonder if someone can answer a question for me:

On TheNet X1H, there is a field for defining the IP address, and the 
IP Broadcast address, but not for the network mask.  My question is:  
does one use the directed broadcast address (ie <network>.255) or
the all ones broadcast (255.255.255.255)?

Thanks,
Glenn/VE6RSX

------------------------------

Date: Sat, 10 Jul 93 10:54:02 -0400
From: NDHM X400  </G=X400/S=NDHM/O=GTEGOVSYS/PRMD=GTEGS/ADMD=TELEMAIL/C=US/@gtespace.ndhm.gtegsc.com>
Subject: Undeliverable Mail
To: TCP-Group@UCSD.Edu

Message: TCP-Group Digest V93 #176
Sent: Sat, Jul 10, 1993 9:58 AM
To: Ross Jr Charlie
On Server: NDHM 6
Date: Sat, Jul 10, 1993 11:00 AM
Reason: Could not be delivered because the destination Microsoft Mail server 
could not be found.

------------------------------

Date: Sat, 10 Jul 93 10:54:11 -0400
From: NDHM X400  </G=X400/S=NDHM/O=GTEGOVSYS/PRMD=GTEGS/ADMD=TELEMAIL/C=US/@gtespace.ndhm.gtegsc.com>
Subject: Undeliverable Mail
To: TCP-Group@UCSD.Edu

Message: TCP-Group Digest V93 #176
Sent: Sat, Jul 10, 1993 9:58 AM
To: Ross Jr Charlie
On Server: NDHM 6
Date: Sat, Jul 10, 1993 11:00 AM
Reason: Could not be delivered because the destination Microsoft Mail server 
could not be found.

------------------------------

End of TCP-Group Digest V93 #177
******************************
******************************