Date: Mon, 21 Jun 93 04:30:07 PDT
From: Advanced Amateur Radio Networking Group <tcp-group@ucsd.edu>
Errors-To: TCP-Group-Errors@UCSD.Edu
Reply-To: TCP-Group@UCSD.Edu
Precedence: Bulk
Subject: TCP-Group Digest V93 #160
To: tcp-group-digest
TCP-Group Digest Mon, 21 Jun 93 Volume 93 : Issue 160
Today's Topics:
Anyone using ODIPKT 2.1 with SMC MLID? Help Pls
Cslip (NOS) routing problem with bad TCP option ???
drsi stat
slip link
Send Replies or notes for publication to: <TCP-Group@UCSD.Edu>.
Subscription requests to <TCP-Group-REQUEST@UCSD.Edu>.
Problems you can't solve otherwise to brian@ucsd.edu.
Archives of past issues of the TCP-Group Digest are available
(by FTP only) from UCSD.Edu in directory "mailarchives".
We trust that readers are intelligent enough to realize that all text
herein consists of personal comments and does not represent the official
policies or positions of any party. Your mileage may vary. So there.
----------------------------------------------------------------------
Date: Sun, 20 Jun 93 07:21:38 PDT
From: buaas@trout.nosc.mil (Robert A. Buaas)
Subject: Anyone using ODIPKT 2.1 with SMC MLID? Help Pls
To: tcp-group@ucsd.edu
I'm having trouble getting NOS to find the ODIPKT driver. NOS complains
about the attach packet line in autoexec.net, saying that "Packet driver
has unsupported Class 11". Anyone having used this configuration working
(SMC MLID driver, with ODIPKT 2.1 on top of it), pls email a sample of your
autoexec.bat, config.sys, net.cfg, and autoexec.net files...
thanks in advance.
--Bob K6KGS buaas@nosc.mil
------------------------------
Date: Sun, 20 Jun 93 20:18:32 -0700
From: karn@qualcomm.com (Phil Karn)
Subject: Cslip (NOS) routing problem with bad TCP option ???
To: CSP1DWD@MVS.OAC.UCLA.EDU
I see the problem. The unknown option is the experimental TCP Window
Scale Option (RFC-1072). The header compression code in NOS converts
the incoming TCP header into internal form, then tries to write it
back out unchanged once it notices that the SYN bit is set (which
calls for an uncompressed packet). Unfortunately, the code that
handles options isn't quite general enough, despite some half-hearted
attempts on my part a while back to get ready for these new options.
I never encountered this problem myself with wuarchive because the SLIP
router at work is a Netblazer, not a NOS box, so I never had occasion
to transmit the window shift option through NOS - only receive it.
I'll put this on my list of things to fix. While I'm at it, I might as
well actually implement the Window Scale option, since it's pretty
trivial.
Phil
------------------------------
Date: Sun, 20 Jun 1993 17:48:41 -0400 (EDT)
From: KC4BZK@delphi.com
Subject: drsi stat
To: tcp-group@ucsd.edu
is there any one out there that can tell me what the " DRSI STAT " command
in NOS is telling me. i run the drsi cards but dont have any doc's on this
command......tnks in advance......kc4bzk@delphi.com
------------------------------
Date: Sun, 20 Jun 1993 17:44:56 -0400 (EDT)
From: KC4BZK@delphi.com
Subject: slip link
To: tcp-group@ucsd.edu
is there any one out there that is running a slip link from one PC to
another an 9600 bps. i cant get my machine's to go any faster than 2400bps
with out getting check sum errors......HELP!...tnk's in advance....
kc4bzk@delphi.com
------------------------------
End of TCP-Group Digest V93 #160
******************************
******************************