Date: Thu,  3 Feb 94 01:41:10 PST
From: Info-Hams Mailing List and Newsgroup <info-hams@ucsd.edu>
Errors-To: Info-Hams-Errors@UCSD.Edu
Reply-To: Info-Hams@UCSD.Edu
Precedence: Bulk
Subject: Info-Hams Digest V94 #106
To: Info-Hams


Info-Hams Digest            Thu,  3 Feb 94       Volume 94 : Issue  106

Today's Topics:
                                BV2CH
                        Coaxial cable (4 msgs)
      Daily Summary of Solar Geophysical Activity for 30 January
                    Dayton Parking: Hell on Earth!
                     FTP site with Mods!!! et al.
               ICF-2010, indentifying components, help!
             Your experiences on 40 meter CW QRP (2 msgs)

Send Replies or notes for publication to: <Info-Hams@UCSD.Edu>
Send subscription requests to: <Info-Hams-REQUEST@UCSD.Edu>
Problems you can't solve otherwise to brian@ucsd.edu.

Archives of past issues of the Info-Hams Digest are available 
(by FTP only) from UCSD.Edu in directory "mailarchives/info-hams".

We trust that readers are intelligent enough to realize that all text
herein consists of personal comments and does not represent the official
policies or positions of any party.  Your mileage may vary.  So there.
----------------------------------------------------------------------

Date: Wed, 2 Feb 1994 00:20:02 GMT
From: ucsnews!sol.ctr.columbia.edu!howland.reston.ans.net!cs.utexas.edu!oakhill!victorc@network.ucsd.edu
Subject: BV2CH
To: info-hams@ucsd.edu

Just say hi to everybody, DE BV2CH 

------------------------------

Date: 1 Feb 1994 19:18:48 GMT
From: mvb.saic.com!unogate!news.service.uci.edu!usc!sol.ctr.columbia.edu!usenet.ucs.indiana.edu!master.cs.rose-hulman.edu!news@network.ucsd.edu
Subject: Coaxial cable
To: info-hams@ucsd.edu

>I'd like to have some good quality coaxial cable. Can you give
>me any suggestions if you know?
>Now, I am using a 50 ohm cable, RG-58 A/U!
> 
>  Frankie Choy
Howdy, Frankie:    Get some Belden 9913 or equivalent.  But remember it's  
not as flexible as RG-58.  I only use RG-58 for short junmpers arounbd the  
shack.  And I'm even replacing those cables with RG-223.

73 de Jack, K9CUN

------------------------------

Date: 1 Feb 1994 19:18:00 GMT
From: mvb.saic.com!unogate!news.service.uci.edu!usc!sol.ctr.columbia.edu!usenet.ucs.indiana.edu!master.cs.rose-hulman.edu!news@network.ucsd.edu
Subject: Coaxial cable
To: info-hams@ucsd.edu

]>  I'd like to have some good quality coaxial cable. Can you give
]>  me any suggestions if you know?
]>  Now, I am using a 50 ohm cable, RG-58 A/U!
]> 
]>  Frankie Choy

Howdy, Frankie:

Get some Belden 9913 or equivalent.  But remember it's not as flexible as  
RG-58.  I only use RG-58 for short junmpers arounbd the shack.  And I'm  
even replacing those cables with RG-223.

73 de Jack, K9CUN

------------------------------

Date: 1 Feb 1994 19:19:19 GMT
From: mvb.saic.com!unogate!news.service.uci.edu!usc!sol.ctr.columbia.edu!usenet.ucs.indiana.edu!master.cs.rose-hulman.edu!news@network.ucsd.edu
Subject: Coaxial cable
To: info-hams@ucsd.edu

>I'd like to have some good quality coaxial cable. Can you give
>me any suggestions if you know?
>Now, I am using a 50 ohm cable, RG-58 A/U!
> 
>  Frankie Choy
Howdy, Frankie:    Get some Belden 9913 or equivalent.  But remember it's  
not as flexible as RG-58.  I only use RG-58 for short junmpers arounbd the  
shack.  And I'm even replacing those cables with RG-223.  Hope you are  
having fun with the project.

73 de Jack, K9CUN

------------------------------

Date: 1 Feb 1994 19:19:39 GMT
From: mvb.saic.com!unogate!news.service.uci.edu!usc!sol.ctr.columbia.edu!usenet.ucs.indiana.edu!master.cs.rose-hulman.edu!news@network.ucsd.edu
Subject: Coaxial cable
To: info-hams@ucsd.edu

>I'd like to have some good quality coaxial cable. Can you give
>me any suggestions if you know?
>Now, I am using a 50 ohm cable, RG-58 A/U!
> 
>  Frankie Choy
Howdy, Frankie Choy:    Get some Belden 9913 or equivalent.  But remember  
it's not as flexible as RG-58.  I only use RG-58 for short junmpers  
arounbd the shack.  And I'm even replacing those cables with RG-223.  Hope  
you are having fun with the project.

73 de Jack, K9CUN

------------------------------

Date: Mon, 31 Jan 1994 11:07:38 MST
From: munnari.oz.au!metro!news.cs.su.oz.au!harbinger.cc.monash.edu.au!yeshua.marcam.com!zip.eecs.umich.edu!destroyer!nntp.cs.ubc.ca!alberta!ve6mgs!usenet@network.ucsd.edu
Subject: Daily Summary of Solar Geophysical Activity for 30 January
To: info-hams@ucsd.edu

                /\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\

                 DAILY SUMMARY OF SOLAR GEOPHYSICAL ACT

                                30 JANUARY, 1994

                /\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\

                  (Based In-Part On SESC Observational Data)


SOLAR AND GEOPHYSICAL ACT
-----------------------------------------------------------

!!BEGIN!! (1.0) S.T.D. Solar Geophysical Data Broadcast for DAY 030, 01/30/94
10.7 FLUX=099.0  90-AVG=106        SSN=081      BKI=1022 1331  BAI=006
BGND-XRAY=B1.5     FLU1=3.1E+05  FLU10=9.5E+03  PKI=3123 3332  PAI=009
  BOU-DEV=008,002,017,018,009,021,023,006   DEV-AVG=013 NT     SWF=00:000
 XRAY-MAX= C3.2   @ 0111UT    XRAY-MIN= B1.2   @ 2359UT   XRAY-AVG= B2.8
NEUTN-MAX= +002%  @ 2210UT   NEUTN-MIN= -002%  @ 2140UT  NEUTN-AVG= -0.2%
  PCA-MAX= +0.1DB @ 2005UT     PCA-MIN= -0.4DB @ 1145UT    PCA-AVG= -0.0DB
BOUTF-MAX=55345NT @ 2359UT   BOUTF-MIN=55318NT @ 1807UT  BOUTF-AVG=55338NT
GOES7-MAX=P:+000NT@ 0000UT   GOES7-MIN=N:+000NT@ 0000UT  G7-AVG=+067,+000,+000
GOES6-MAX=P:+116NT@ 1707UT   GOES6-MIN=N:-059NT@ 0740UT  G6-AVG=+088,+029,-028
 FLUXFCST=STD:105,105,105;SESC:105,105,105 BAI/PAI-FCST=010,010,010/010,015,012
    KFCST=2223 4111 1112 3111  27DAY-AP=011,006   27DAY-KP=3133 3331 1322 2110
 WARNINGS=
   ALERTS=
!!END-DATA!!

NOTE: The Effective Sunspot Number for 29 JAN 94 was  52.0.
      The Full Kp Indices for 29 JAN 94 are: 1+ 2- 3o 3o   3o 2- 1- 2- 


SYNOPSIS OF ACT
--------------------

             Solar activity was low. Only one C-class flare occurred:
       an uncorrelated C3 at 0110Z. The remainder of the period was
       remarkably void of any activity. Region 7662 (S16E10) is
       showing some modest growth. Some new emerging flux groups were
       observed just to the west of 7662. The remainder of the sun was
       quiet and stable.

            Solar activity forecast:  solar activity is expected to be
       low.

            The geomagnetic field was quiet to unsettled.

            Geophysical activity forecast:  the geomagnetic field is
       expected to be predominantly unsettled for the next three days.

            Event probabilities 31 jan-02 feb

                             Class M    05/05/05
                             Class X    01/01/01
                             Proton     01/01/01
                             PCAF       Green

            Geomagnetic activity probabilities 31 jan-02 feb

                        A.  Middle Latitudes
                        Active                25/15/15
                        Minor Storm           15/10/10
                        Major-Severe Storm    05/01/01

                        B.  High Latitudes
                        Active                25/20/20
                        Minor Storm           15/10/10
                        Major-Severe Storm    05/05/05

            HF propagation conditions were normal over all regions.
       Near-normal conditions should continue over the next 72 hours.
       The risk for SWF activity over daylit paths has diminished.


COPIES OF JOINT USAF/NOAA SESC SOLAR GEOPHYSICAL REPORTS
========================================================

REGIONS WIT
----------------------------------------------------------
NMBR LOCATION  LO  AREA  Z   LL   NN MAG TYPE
7658  N10W92  184  0020 CAO  05  002 BET
7661  N09W43  135  0020 CRO  02  003 BET
7662  S16E10  082  0040 DRO  06  010 BET
7663  N12E06  086  0000 AXX  01  002 ALPHA
7664  S07E49  043  0010 AXX  00  002 ALPHA
7665  N05E65  027  0060 HSX  02  002 ALPHA
7659  S12W53  145                    PLAGE
7660  S09W22  114                    PLAGE
REGIONS DUE TO RET
NMBR LAT
7651 S07   350


LISTING OF SOLAR ENERGETIC EVENTS FOR 30 JANUARY, 1994
------------------------------------------------------
BEGIN  MAX  END  RGN   LOC   XRAY  OP 245MHZ 10CM   SWEEP SWF
     NO EVENTS OBSERVED


POSSIBLE CORONAL MASS EJECTION EVENTS FOR 30 JANUARY, 1994
----------------------------------------------------------
               ISOLATED HOLES AND POLAR EXT
      EAST   SOUTH  WEST   NORTH  CAR  TYPE  POL  AREA   OBSN
60   S16W06 S26W08 S18W21 S14W13  112  ISO   POS   003 10830A


SUMMARY OF FLARE EVENTS FOR THE PREVIOUS UTC DAY
------------------------------------------------

 Date   Begin  Max   End  Xray  Op Region  Locn    2695 MHz  8800 MHz  15.4 GHz
------  ----  ----  ----  ----  -- ------ ------  --------- --------- ---------
29 Jan: 0059  0102  0104  C1.0                                         
        0247  0302  0306  B9.7                                         
        0314  0413  0422  M2.4                                   110       130
        0735  0739  0742  C5.0                                         
        0819  0833  0842  C3.3                                         
        0847  0905  0918  C6.6  SF  7658  N12W71                       
        1050  1059  1110  C2.3                                         
        1113  1129  1138  M2.4                                         
        1252  1308  1321  C6.5                                         
        1503  1514  1545  C8.8                                    35        26


REGION FLARE STATISTICS FOR THE PREVIOUS UTC DAY
------------------------------------------------

                C   M   X     S   1   2   3   4   Total   (%)
               --  --  --    --  --  --  --  --    ---  ------
  Region 7658:  1   0   0     1   0   0   0   0    001  (10.0)
Uncorrellated: 6   2   0     0   0   0   0   0    009  (90.0)

 Total Events: 010 optical and x-ray.


EVENTS WIT
----------------------------------------------------------------

 Date   Begin  Max   End  Xray  Op Region  Locn    Sweeps/Optical Observations
------  ----  ----  ----  ----  -- ------ ------   ---------------------------
29 Jan: 1050  1059  1110  C2.3                     III

NOTES:
     All times are in Universal Time (UT).  Characters preceding begin, max,
     and end times are defined as:  B = Before,  U = Uncertain,  A = After.
     All times associated with x-ray flares (ex. flares which produce
     associated x-ray bursts) refer to the begin, max, and end times of the
     x-rays.  Flares which are not associated with x-ray signatures use the
     optical observations to determine the begin, max, and end times.

     Acronyms used to identify sweeps and optical phenomena include:

          II        = Type II Sweep Frequency Event
          III       = Type III Sweep
          IV        = Type IV Sweep
          V         = Type V Sweep
          Continuum = Continuum Radio Event
          Loop      = Loop Prominence System,
          Spray     = Limb Spray,
          Surge     = Bright Limb Surge,
          EPL       = Eruptive Prominence on the Limb.


**  End of Daily Report  **

------------------------------

Date: Tue, 1 Feb 1994 21:07:44 GMT
From: library.ucla.edu!europa.eng.gtefsd.com!emory!wa4mei.ping.com!ke4zv!gary@network.ucsd.edu
Subject: Dayton Parking: Hell on Earth!
To: info-hams@ucsd.edu

In article <2im1g0$i6v@oak.oakland.edu> prvalko@vela.acs.oakland.edu (prvalko) writes:
>I'm not out to scare anyone away (heh heh) but that guy who posted the
>"Jesus is coming" thread can rest easy because not even the Lord himself
>will be able to get out of the traffic jam around Dayton on April 29th!
>
>73 all!  CU on Shiloh Springs Road.   paul

They're going to use the money saved to print up nice award certificates
for all the hams who earn WAS while trapped in the traffic jam. :-)

Gary

-- 
Gary Coffman KE4ZV          |    You make it,     | gatech!wa4mei!ke4zv!gary
Destructive Testing Systems |    we break it.     | uunet!rsiatl!ke4zv!gary
534 Shannon Way             |    Guaranteed!      | emory!kd4nc!ke4zv!gary 
Lawrenceville, GA 30244     |                     | 

------------------------------

Date: 3 Feb 94 04:12:26 GMT
From: news-mail-gateway@ucsd.edu
Subject: FTP site with Mods!!! et al.
To: info-hams@ucsd.edu

My modem isn't working, but I have seen that people are looking for a FTP
site with mods.  Well, the other nite my friend and I were playing with his
modem and I found a whole bunch of mods at:

        garfield.catt.ncsu.edu
in
        pub\???
I forget the directory; it was a while ago.  There were probably plans for
40 or so radios; once again I'm not sure.  Only word of caution:  they only
allow 10 anonymous users, so you might have fun trying to get in.

Point 2:  the other night I was scanning with my 2m HT and on 145.990 I
heard some squawking and beeping, as well as VV7VW, in British Columbia.  I
am in Madison, WI, and that's true VHF DX if I ever heard it.  Granted, the
band was up, but I'm still wondering...is that a satellite frequency?

Point 3:  I got my radio late in December, and brought it home from school
with me to Green Bay, WI.  I noticed that I always got a static signal on
146.760.  There is a repeater on that freq in Appleton, 30 miles away, but
that wasn't the source because I could key that repeater up while the
static was being recieved.  I noticed the same problem in Madison, where I
go to the UW.  There is a repeater on 146.760 here, too, and I can use it. 
Is this chronic interference unique to my radio, or is the HTX-202
susceptible to QRM on this freq?

Point 4:  (I said it was an FTP site, et al.)  There will be a Hamfest/VE
test session in Green Bay, WI on February 20.  It will be at Ashwaubenon
High School, from 8:00 am until the middle of the afternoon.  Admission is
$3 at the door.  Proceeds go to help the AHSTC put up their new 2m repeater
on 147.075 +, P/L 107.2.  Talk-in will be on the 147.075, and if that's not
up it will be on 147.270 + P/L 107.2 and 146.520 simplex.

For more information email:
segigot@students.wisc.edu

or call Chad Stiles N9PAY at:
(414)-494-2936

Thanks for hearing me.

Scott Gigot  N9VOM
segigot@students.wisc.edu

------------------------------

Date: Sun, 30 Jan 1994 16:16:40 GMT
From: agate!howland.reston.ans.net!newsserver.jvnc.net!raffles.technet.sg!ntuix!ntuvax.ntu.ac.sg!asirene@network.ucsd.edu
Subject: ICF-2010, indentifying components, help!
To: info-hams@ucsd.edu

Hi,

 Does anyone here have an ICF-2010/2001D service manual? I need
some help indentifying components:-

 1) junction of R106,R113 and R118
 2) gate of Q22
 3) gate of Q31

Can someone send me a GIF of the relevant section or maybe put it in the
mail for me? Perhaps a detailed description is sufficient?

 Tks.

73 de 9V Daniel

------------------------------

Date: Tue, 1 Feb 1994 23:13:41 GMT
From: ucsnews!sol.ctr.columbia.edu!howland.reston.ans.net!spool.mu.edu!olivea!sgigate.sgi.com!odin!chuck.dallas.sgi.com!adams@network.ucsd.edu
Subject: Your experiences on 40 meter CW QRP
To: info-hams@ucsd.edu

In article <1994Jan31.135516.1302@rsg1.er.usgs.gov>,
         junger@rsg1.er.usgs.gov (John Unger) writes:
...stuff deleted...
|> 
|> The key for me in working 40 CW successfully (and I'm not all that
|> successful!!) is having a good receiver and listening carefully
|> and diligently.  Band conditions seem to vary quickly and drastically
|> on 40; you should be able to recognize when it is a good time to work
|> hard for DX and when you just might as well rag chew with the guy
|> down the street. I wouldn't (and don't) use any antenna that was
|> "worse" then a resonant dipole in performance.  You might consider
|> some of the "shortened" dipoles if space is a factor; but I don't
|> have any experience with them.
...more stuff deleted...
|> cheers -- John, W3GOI
|> 

1.  QRPers usually hang out around 7.040MHz on 40.

2.  Late and nite the band comes and goes, so if it seems dead it might
    be, but then again, just try it.

3.  Three nites ago, worked an F6 from the home qth near Dallas.  I was
    using 0.95W on a 250' long wire up 33' pointed north.  He was in the
    contest.

4.  In QRP work, the antenna seems to be everything.  But, don't give up
    just because you have only a dipole.

5.  Patience, patience, patience.  QRP separates the tolerant from the
    intolerant rather rapidly.

6.  Listen to 7.050MHz.  If you hear a warbling signal, then the band is
    very very long.  I haven't found anyone to tell me what in the world
    (or outta of this world) this signal is.  Kinda reminds me of the
    Over the Horizon Radar from the old USSR.

All the above IMHO.  I've been doing QRP over 30 years and CW 35+, thus
I'm an OF, but I'm still learning.  I haven't had any operations to talk
about over the air, so I guess I won't fit in the phone crowd......  :-)


dit  dit


-- 
Chuck Adams  K5FO  CP-60 wpm
adams@sgi.com

------------------------------

Date: Mon, 31 Jan 1994 14:59:48 GMT
From: netcomsv!netcom.com!greg@decwrl.dec.com
Subject: Your experiences on 40 meter CW QRP
To: info-hams@ucsd.edu

>Andrew M. Cohn (andy@clark.net) wrote:
>: If you work 40 meter CW, with 5 watts or less, and use less than ideal 
>: antennas (no beams, dipoles or rhombics, etc), I would like to hear about
>: your experiences. No...I'm not writing a book; I just want to know what
>: I can expect before investing in a QRP station!  

Andy...

The year was 1976, I was a Novice.

Rig: Ten Tec Argonaut 509, shiny and new. <3 watts out.

Antenna: Bent 40 meter dipole, fed with RG/174 1/8" coax. Antenna
hidden behind false roof on second-story. Three inches from wood
fascia, three feet above roof surface.

Sunspots: What sunspots, it was 1976!?

Results: Lots of fun on 40, some on 15, too. 30-odd states in four
months as a Novice. Enough contacts to go from 5 to 13WPM and upgrade
to Advanced in less than six months with no anxiety about code
speed. Typically five or six QSOs in each couple-hour session.

Recommendation: Go for it.

Greg

------------------------------

Date: Mon, 31 Jan 1994 20:28:41 GMT
From: metro!news.cs.su.oz.au!harbinger.cc.monash.edu.au!yeshua.marcam.com!news.kei.com!eff!usenet.ins.cwru.edu!howland.reston.ans.net!vixen.cso.uiuc.edu!sdd.hp.com!hpscit.@munnari.oz.au
To: info-hams@ucsd.edu

References <2igvqt$ov2@tcomeng.tcomeng.com>, <hatunenCKI4Mx.4HD@netcom.com>, <tweekCKI8FK.5xr@netcom.com>am
Subject : Re: FCC Database Online For Calif.

Michael D. Maxfield (tweek@netcom.com) wrote:

: I too was hoping for a little different implementation.  I noticed that
: you must exactly match the Licensee name  (MC DONALDS REST works whereas
: MC DONALDS does not work) as it is in the licensee field.  

of all the things to listen to on a scanner, I still am trying to figure
out why some one would want to listen to "that's a big Mac, .....". Watching
paint dry must really make some people wet thier pants.

------------------------------

Date: Mon, 31 Jan 1994 14:45:32 GMT
From: netcomsv!netcom.com!greg@decwrl.dec.com
To: info-hams@ucsd.edu

References <9401230124.A9637wk@support.com>, <gregCK519D.84u@netcom.com>, <1994Jan28.171743.483@arrl.org>
Subject : Re: RAMSEY FX TRANSCEIVER

In article <1994Jan28.171743.483@arrl.org> ehare@arrl.org (Ed Hare (KA1CV)) writes:
>Greg Bullough (greg@netcom.com) wrote:
>
>: Steven has hit it on the head. As hams, we have for years said "can't
>: afford a commercial rig? Home-brew or build a simple kit." Then
>: QST and all the other magazines which bang this drum (which quite
>: handily fills up magazine pages with circuits that few ever 
>: build) reap big advertising dollars from kit companies. 
>
>For starters, I am not sure that few ever build projects from
>magazines. 

Why? Haven't you polled your readers, in order to make intelligent
editorial decisions? Haven't you asked 'if not, why not?' '73' has
an article-by article reader feedback form, every issue. If you
don't have the information, you really aren't in much of a position
to either support or refute my assertion, are you?

>Some of the authors that have offered a kit have reported
>large sales

And god bless 'em if they do, for they are the ones who recognize
that parts procurement is 90% of the problem and 200% of the 
expense of home-brewing. Someone who take the time to write an article,
and then offer a kit, with no intention of profiting by either is,
IMHO, entitled to some sort of sainthood.

>something else. Go to any hamfest, note the rows upon rows of
>vendors offering components. Hams are buying them, putting them
>in bags and taking them home. They must be doing something with 
>the parts.

In my experience, they're gathering bits for something they'll
'get around to someday,' and or looking for a specific component
for some simple use.

>Even if hams don't actually build very many projects, they sure seem
>to enjoy reading (or thinking ) about building them! All of the ham and 
>electronics magazines offer construction articles. I don't think I
>would characterize printing articles that our readers like as "banging
>a drum", but you may have meant something I just didn't understand.

Yup. One of the difficulties, over the years, is that many of the
folks at ARRL HQ 'just didn't understand,' what it's like to live
in the real world without the worlds biggest junk box at their
disposal, as well as instrumentation, EE degrees, etc., in pursuit
of the hobby. Sure, I *like* reading the advanced construction 
articles, and dreaming that I might some day be entitled to 
hold the same end of a soldering iron as Wes Hayward. The fact
is, though, that I'm doing good if I have the ability and time
to crank up a two-transistor QRP transmitter.

The 'drum' being banged is one which rings out 'build build build.' The
one that needs to be banged is 'how to get on the air with a key,
a chunk of coax, and an HW-101 you picked up for a buck and a quarter
at the ham-fest.' Or 'how can a tell a good old FM model HT from
a dud?' Building is great. But there is NO substitute for getting
a new ham *ON THE AIR* as expeditiously and cheaply as possible,
and with the least angst. Sure, there're folks (like the gentleman
from Hawaii who did some articles back in the 70's) who get their
Novice ticket and home-brew everything from the wall out. And
they're great. But that's just not realistic for most new hams.

The no-code ticket was instituted to reduce discouragement. The
League fought it tooth-and-nail, until it was clear that the League
had lost. This 'build it yourself' approach to basic communications
gear is another source of discouragement, and a recipe for unrealistic
expectations. The 'right' way, IMHO, is to get the new ham on the air
down the path of least resistance, initially. Then encourage him/her
to branch out, by building simple station accessories, perhaps a 
QRP transmitter to use alongside the HW-101 or IC-737, etc. By the
way, the League and QST have flirted with this policy from time to
time, but they can't seem to get away from the 'all home-built' ideal.

>Now, as for the big adverising dollars, I took a look at the February
>QST issue. I counted two 1/8th-page ads, two 1/12th page ad and a 1/24th-
>page ad, plus 4 ham ads, for companies offering kits.

I guess Ramsay's and Hamtronics' full-page ads didn't run in February.

>a small percentage of our total ad space; most of the ads are for
>some form of ready-made product. Our editorial policy is not influenced
>by our advertisers; it is determined by our perceptions of what
>hams want to see. 

More correctly stated: 'by what the Directors want hams (particularly
new hams) to see.'

>: As a hobby which has a tradition of mentoring ("elmering"), we are
>: doing the Right Thing(TM) when we identify something like a Ramsey
>: kit which is apt to blow a new ham's radio budget out the window
>: while discouraging him or her, and leaving him without a working
>: rig. 
>
>Our QST Product Review did indeed point out the problems we found
>with the Ramsey FX-146. We also pointed out those things we like.
>This ensures that QST reviews are complete and unbiased. People
>who read these things are able to decide which things are important
>and buy accordingly.
>
>
And good it was. QST Product Reviews are the ONLY ones I would ever
trust. Mostly because I've seen gushing, press-release quality *articles*
in 73 and CQ, masquerading as product reviews. It only begs the question
of why, when this landmark kit has been on the market for several years
already, it was just recently the subject of a review in QST. Lots of
stuff of much lesser interest has appeared before this one. I mean,
I bought one of the close-outs of the first Ramsay 146 kits on sale
a good two years ago! Haven't got around to assembling it yet, but
I wish I'd known what to watch for before plunking even the bargain-basement
price on the counter.

Greg

------------------------------

End of Info-Hams Digest V94 #106
******************************
******************************