Date: Wed, 26 Jan 94 10:07:39 PST From: Ham-Digital Mailing List and Newsgroup Errors-To: Ham-Digital-Errors@UCSD.Edu Reply-To: Ham-Digital@UCSD.Edu Precedence: Bulk Subject: Ham-Digital Digest V94 #14 To: Ham-Digital Ham-Digital Digest Wed, 26 Jan 94 Volume 94 : Issue 14 Today's Topics: (none) AFSK with TEKK Data Radios ? APLINK ftp site ? BPQ 407a ? ftp site? Can 9600 baud TNCS autobaud? Data about Repeaters Global Alert How to drive a Baycom with a Sun SparcStation Ka9q for windows (3 msgs) Notebook interference to HT? PK-88 mailbox, can it forward mail to other stations? PK900 & SSTV Q: Monicor, Inc. -- Software ??? Robot file format question Scheme of G3RUH FSK modem; HELP me topten digital slogans Want TCP/IP for Macintosh Send Replies or notes for publication to: Send subscription requests to: Problems you can't solve otherwise to brian@ucsd.edu. Archives of past issues of the Ham-Digital Digest are available (by FTP only) from UCSD.Edu in directory "mailarchives/ham-digital". We trust that readers are intelligent enough to realize that all text herein consists of personal comments and does not represent the official policies or positions of any party. Your mileage may vary. So there. ---------------------------------------------------------------------- Date: 25 Jan 94 13:25:42 GMT From: news-mail-gateway@ucsd.edu Subject: (none) To: ham-digital@ucsd.edu help ------------------------------ Date: 20 Jan 1994 17:56:38 GMT From: darwin.sura.net!howland.reston.ans.net!usenet.ins.cwru.edu!cleveland.Freenet.Edu!dq528@seismo.css.gov Subject: AFSK with TEKK Data Radios ? To: ham-digital@ucsd.edu Earlier there was some chatter on this newsgroup about TEKK's data/telemetry radios. Are these radios suitable for use with AFSK modulation? Specifically the TI TCM3105 modem chip. Has anyone done this? thanks, Bret -- | Bret Berger | dq528@cleveland.freenet.edu | | KB7EGU | 216.467.0965 FAX 216.467.3580 | | Engineer | 6527 Deerfield Drive, Suite 303 | | StoneFly Technology | Sagamore Hills, OH 44067-3108 | ------------------------------ Date: Tue, 25 Jan 1994 10:25:01 GMT From: Germany.EU.net!thoth.mch.sni.de!news.sni.de!kassel!nessos!schro@uunet.uu.net Subject: APLINK ftp site ? To: ham-digital@ucsd.edu I'm looking for the APLINK program. Is it available via ftp ? tnx es 73 de Django DL5YEC ------------------------------ Date: 24 Jan 1994 02:34:50 GMT From: juniper.almaden.ibm.com!enge.almaden.ibm.com!enge@uunet.uu.net Subject: BPQ 407a ? ftp site? To: ham-digital@ucsd.edu I just loaded it to ucsd.edu in hamradio/packet/tcpip/incoming and to kilroy.jpl.nasa.gov in pub/incoming. The file is BPQ407A.ZIP Roy Engehausen, AA4RE enge@almaden.ibm.com ------------------------------ Date: 24 Jan 94 15:14:36 -0600 From: news.ucr.edu!library.ucla.edu!europa.eng.gtefsd.com!howland.reston.ans.net!cs.utexas.edu!sdd.hp.com!saimiri.primate.wisc.edu!news.doit.wisc.edu!uwec.edu!whitemp@network.ucsd.edu Subject: Can 9600 baud TNCS autobaud? To: ham-digital@ucsd.edu Quick question: Do 9600 baud packet TNCs 'autobaud?' Can a fellow connect to them with a 1200 baud tnc? Thanks- Mike White N9UXC whitemp@cnsvax.uwec.edu n9uxc@bbscfl.#cfl.wi.na.usa ------------------------------ Date: Thu, 20 Jan 1994 16:29:47 GMT From: darwin.sura.net!howland.reston.ans.net!torn!nott!cunews!freenet.carleton.ca!FreeNet.Carleton.CA!ab154@seismo.css.gov Subject: Data about Repeaters To: ham-digital@ucsd.edu Hello to all Hams: My name is Bryan Parlee, VE3BKP, a native of Ontario and a temporary resident of Nova Scotia, Canada. I am attending the College of Geographic Sciences and as an Amateur Operator (although only 8months with my ticket) I am looking for some data. My career and study area deals with spatial mapping, satellite imagery, computer modelling and so on. This industry area is known as Geomatics. I am intending to construct/design a Communications Database/Mapping system using existing GIS software like SPANS or ARC/INFO. What is missing however, are known sources of informations/data for Ontario repeaters. I have a list of the actual repaters, call, input, and output...but I would like to go deeper than that with data such as wattage, RX range, Transmission radius, location coordinates, packet linkage info, and functions available. Does anyone know of such a source or perhaps a contact that could provide such information?? My e-mail address is gis308@cogs.ns.ca ....73's and Thanx , Bryan (VE3BKP) -- ------------------------------ Date: Tue, 25 Jan 1994 18:52:11 GMT From: agate!netsys!direct!indirect.com!nu7i@network.ucsd.edu Subject: Global Alert To: ham-digital@ucsd.edu Hey! If you don't like what you see, use the killfile. You don't have the right to try to get him kicked off his system. 73 -- Member: National Federation of the Blind "Proud, Angry, and Strong" -- Jennifer Restle (The complete information access agenda - You print it you braille it too!) ------------------------------ Date: Mon, 24 Jan 1994 17:18:20 GMT From: newsflash.concordia.ca!sifon!clouso.crim.ca!hobbit.ireq.hydro.qc.ca!barde!vaillan@uunet.uu.net Subject: How to drive a Baycom with a Sun SparcStation To: ham-digital@ucsd.edu I would like to connect a Baycom tnc (modem) to the RS232 port of my Sun computer. Which software should I use. I would like to be able to reach local packet BBS with it. 73, Clem. --- Clement Vaillancourt, | Institut de Recherche d'Hydro-Quebec Analyste, | Varennes, P. Quebec, Canada, J3X 1S1 Informatique scientifique | Tel:+1 514 652 8238 Fax:+1 514 652 8309 vaillan@ireq.hydro.qc.ca | Radio-amateur: VE2HQJ@VE2CRL.PQ.CAN.NA ------------------------------ Date: Mon, 24 Jan 1994 17:07:28 GMT From: uchdcc!dcc.uchile.cl!ereimber@uunet.uu.net Subject: Ka9q for windows To: ham-digital@ucsd.edu Hi!. Recently, I asked if there is a version of ka9q for windows. here are some answers: THERE IS NO KA9Q. The versions of Ka9q will not run under a DOS box in Windows, but there are some patches that will help you. There is also a software called Trumped Winsock that implements TCP/IP in windows. Thanks to everyone who answered me. Erich Reimberg N. ------------------------------ Date: 25 Jan 94 14:29:18 GMT From: noc.near.net!news.delphi.com!BIX.com!jsloman@uunet.uu.net Subject: Ka9q for windows To: ham-digital@ucsd.edu ereimber@dcc.uchile.cl (Erich Reimberg N.) writes: >Hi!. > Recently, I asked if there is a version of ka9q for windows. here >are some answers: > THERE IS NO KA9Q. > The versions of Ka9q will not run under a DOS box in Windows, but > there are some patches that will help you. > There is also a software called Trumped Winsock that implements > TCP/IP in windows. >Thanks to everyone who answered me. > Erich Reimberg N. JNOS version 1.07b or later WILL run in a Window happily. You can find it on UCSD.EDU and many other FTP sites. Do an archie search on "JNOS" for more options. -- Jeff Sloman N1EWO ------------------------------ Date: Mon, 24 Jan 1994 18:56:56 GMT From: wang!djenkins@uunet.uu.net Subject: Ka9q for windows To: ham-digital@ucsd.edu ereimber@dcc.uchile.cl (Erich Reimberg N.) writes: > THERE IS NO KA9Q [for windows]. > The versions of Ka9q will not run under a DOS box in Windows, but > there are some patches that will help you. Now I'm confused. I have been running PA0GRI's version of KA9Q's NOS in a DOS window under Windows(tm) for a month now. It works like a charm. I leave it running while my daughter uses Write, Paintbrush, games, etc... Sometimes I even run PCelm in a second DOS window and use a Windows based freeware emacs rip-off to edit mail and replies. I am only running a 16MHz 386SX with 8Meg and a VGA monitor. I haven't tried Phil's latest one from Mecca under Windows, but, I imagine it would work the same. While the L&G (Latest and Greatest) from KA9Q himself doesn't have some of the features of JNOS, MFNOS, GRINOS, etc, etc, etc, it does have an on screen unACK'd frame counter and a separate session for trace stuff. >Thanks to everyone who answered me. You're quite welcome. For the benefit of others, here is what I sent Erich last week: | I don't know if there is one FOR windows. I doubt it. On ucsd.edu is a | file /hamradio/packet/tcpip/mswin/mswinnos.zip. It contains some notes and | a .PIF file that will allow NOS to run in a DOS window under Windows(tm). | It works quite well. | | This will NOT work with the BayCom style modems. They put too much load on | the system to be able to run under Windows. 73, Dave, n1mxv -- David E. Jenkins Home: (508) 632-4164 Wang Labs, Inc. 52 Norman Street Work: (508) 967-7284 M/S 014-690 Gardner, MA 01440-1916 Fax: (508) 967-2212 1 Industrial Ave. Packet: n1mxv@wa1phy.ma e-mail: djenkins@wang.com Lowell, MA 01851 ------------------------------ Date: Mon, 24 Jan 1994 00:42:06 GMT From: ucsnews!sol.ctr.columbia.edu!howland.reston.ans.net!darwin.sura.net!news.Vanderbilt.Edu!news@network.ucsd.edu Subject: Notebook interference to HT? To: ham-digital@ucsd.edu I am successfully running a packet station using a Gateway 386/25 and a KPC-3 and a Realistic HTX-202. I have recently tried the same configuration except using a Compudyne 396SXL notebook computer. When using this computer, I get so much interference on the HT that I can not even squelch it out. I have tried several different antennas but it was no help. What can you recommend I do to make this a usable packet setup? Thanks...Win (KE4IHG) heagyws@ctrvax.vanderbilt.edu ------------------------------ Date: Sun, 23 Jan 1994 22:09:59 GMT From: ucsnews!sol.ctr.columbia.edu!howland.reston.ans.net!vixen.cso.uiuc.edu!milo.mcs.anl.gov!ANLVM.CTD.ANL.GOV!B10990@network.ucsd.edu Subject: PK-88 mailbox, can it forward mail to other stations? To: ham-digital@ucsd.edu I have a PK-88 set up to forward mail to my home bbs. It will not do so unless polled by that bbs, however. I think that is part of a firmware upgrade, so if your friend has an older model that has not been upgraded, it may not have the capability. Also, the PK-88 will not accept hierarchical addressing for outbound mail. --Gary, K9CZB ------------------------------ Date: 24 Jan 1994 16:19:30 GMT From: usc!howland.reston.ans.net!noc.near.net!jericho.mc.com!fugu!levine@network.ucsd.edu Subject: PK900 & SSTV To: ham-digital@ucsd.edu The manual discusses SSTV but I have seen no programs around supporting SSTV rx/tx for the unit. Anyone know of one? --- ------------------------------------------------------------ || // ||\\ //|| //\\ //\\ || // || \\ // || // // ||// || \\ || // // ||\\ || || || \\ === \\ === || \\ || // || \\ // \\ // || \\ || // || \\// \\// ---------------------------------------------------------FTAC Bob Levine KD1GG 7J1AIS VK2GYN formerly KA1JFP levine@mc.com <--Internet email Phone(508) 256-1300 x247 kd1gg@wa1phy.ma <--Packet Mail FAX(508) 256-3599 ------------------------------------------------------------ ------------------------------ Date: Tue, 25 Jan 1994 20:24:46 GMT From: pagesat.net!olivea!sgigate.sgi.com!sgiblab!swrinde!cs.utexas.edu!howland.reston.ans.net!usenet.ins.cwru.edu!eff!news.kei.com!yeshua.marcam.com!zip.eecs.umich.edu!umn.edu!@news.cerf.net Subject: Q: Monicor, Inc. -- Software ??? To: ham-digital@ucsd.edu I was wondering if anyone has had experience designing software for a radio frequency modem from Monicor in Florida. I've been assigned the daunting task of developing software to route up to 16 separate links from handheld radios on a plant floor and a mainframe. I anticipate using a 386 or 486 running DOS as the router and I would like to see/hear what others have done in this arena. Specifically -- What data structure, functions, and exceptions NEED to be available? -- What is the best way to control the UART in the PC? -- What time division routines can be used knowing my hardware constraints? -- Is there any C or C++ shareware out there I can use? please respond via email -- Charles A. Jaeger, B.S. CpE 612/890-5660 or 612/890-5696 Computer Engineer jaeger@sunrayce.solar.umn.edu Burnsville, MN cjaeger@gellersen.valpo.edu ------------------------------ Date: Wed, 26 Jan 1994 10:03:54 GMT From: sdd.hp.com!cs.utexas.edu!howland.reston.ans.net!pipex!uknet!doc.ic.ac.uk!pinky.shu.ac.uk!cms-2.shu.ac.uk!mfitzgib@decwrl.dec.com Subject: Robot file format question To: ham-digital@ucsd.edu I have a friend who is trying to find a way to convert robot *.hmz (hmz or somthing like that!] to gif pcx etc.... is there any software for doing this? anyone know what the file format for the robot is? Mick G8VHB ------------------------------ Date: 24 Jan 1994 07:16:32 GMT From: saimiri.primate.wisc.edu!caen!nigel.msen.com!usenet.ins.cwru.edu!howland.reston.ans.net!pipex!sunic!trane.uninett.no!news.eunet.no!nuug!news.eunet.fi!news.spb.su!KremlSun!@@sdd.hp.com Subject: Scheme of G3RUH FSK modem; HELP me To: ham-digital@ucsd.edu Hello ALL I'am looking for scheme, diagrams, description on 9600 G3RUH FSK modem (not TAPR, K9NG). If you can to help, PSE let me know. TNX in advance, 73! Victor RX3DIN; ex: UV3DIN ------------------------------ Date: 24 Jan 1994 22:19:55 GMT From: ucsnews!sol.ctr.columbia.edu!howland.reston.ans.net!cs.utexas.edu!convex!tonyp@network.ucsd.edu Subject: topten digital slogans To: ham-digital@ucsd.edu TOP-TEN SLOGANS FOR DIGITAL MODE - by WA2EAA -------------------------------- 17. "FECing" is OK, but I prefer "Masterstation". 16. Take TNC (you're old if you "get" this). 15. Just the FAX, ma'am. 14. COMPRESSED PACKET runs 8-level code. You can KISS ASCII. 13. I FEC'd for hours, but my contact never came. 12. You bet your ASCII I run digital mode! 11. "QRL?" the frequency first: Practice safe FECs. 10. AMTOR is just a baby-SITOR. (bah-dump!) 9. Reach out & FEC someone. 8. DIGITAL MODE: It's a kick in the ASCII! 7. AMTOR: It's FEC'n fun! 6. Noah's ARQ. 5. In AMTOR it takes two to perform "Masterstation". 4. FEC until you're ARQ'd. 3. I can't decode 7-level, so you'd better byte my ASCII. 2. Keep on FEC'n (tie-dyed shirt seen at a 'Dead concert). and the number 1 slogan 1. Put your TNC in loopback, and FEC yourself! _..._ (Last night 40-meters was QRN-city and I had nothing better to do) -- Tony J. Podrasky | What's this thing? San Diego , Ca | It's called a MODEM. tonyp@convex.com | And what's this button for? WA2EAA NNNN ZCZC | Whatever you do don't touc{{{7bh6x!{@%hxbd&$#)$% NO CARRIER ------------------------------ Date: 24 Jan 1994 15:07:42 GMT From: usc!howland.reston.ans.net!vixen.cso.uiuc.edu!ux1.cso.uiuc.edu!rtaylor@network.ucsd.edu Subject: Want TCP/IP for Macintosh To: ham-digital@ucsd.edu Kenneth.E.Harker@Dartmouth.Edu (Kenneth E. Harker) writes: > I am interested in getting the TCP/IP software that is available >for Macintosh. Is there an ftp site somwhere with this on it? > Also, has there been any work done on using the newer Macs' >Geoports? Using the DSP chip on the AV macs' motherboards? I'd be >very interested in that, as my new deck is an AV. > 73's to all... NCSA telnet can be acquired from the National Center for Supercomputing Applications at the University of ILL. It can be downloaded from there on Internet, but I don't know where the files are. Contact them. ------------------------------ End of Ham-Digital Digest V94 #14 ****************************** ******************************