1-Jul-89 05:16:26-MDT,8010;000000000000
Return-Path: <INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL>
Date: Sat,  1 Jul 89 05:00:44 MDT
From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL
Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL
Subject: INFO-CPM Digest V89 #145
To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL

INFO-CPM Digest             Sat,  1 Jul 89       Volume 89 : Issue 145

Today's Topics:
                         CP/M 3.0 BBS wanted
                           Dbase II Needed
                      New CCP features. (2 msgs)
                       QX-10/16 VT100 emulation
                       terminal emulator, v100
----------------------------------------------------------------------

Date: 29 Jun 89 14:31:34 GMT
From: ima!cfisun!lakart!dg@decvax.dec.com  (David Goodenough)
Subject: CP/M 3.0 BBS wanted

dorian@pawl.rpi.edu (Dorian S. Garson) sez:
> I've just acquired a Morrow MD11 system (11 meg HD, CP/M 3.0, Z80-A - my first
> CP/M system), and I'd like to run a BBS on it.  Can anyone tell me where I
> might find public domain/shareware or very inexpensive BBS software for this
> beast?  If there's more than one to chose from, which one is the best?

Mr. Garson then talks about the SIMTEL archives ......

HOWEVER, I'm gonna throw in my $0.02 worth and say that the best CP/M
BBS I've seen is the PICS system. It's written in (Turbo ?) Pascal, and
has all the neat features you expect from a BBS. It is a little
different from a RCP/M in that you never actually get to see the A> or
A0> or whatever prompt, but since there is a BBS program looking after
security etc. it's much easier to do, since vanilla CP/M doesn't really
understand the meaning of the word security (3.0 may be better than 2.2
I just haven't read the documentation enough yet).
-- 
	dg@lakart.UUCP - David Goodenough		+---+
						IHS	| +-+-+
	....... !harvard!xait!lakart!dg			+-+-+ |
AKA:	dg%lakart.uucp@xait.xerox.com		  	  +---+

------------------------------

Date: 1 Jul 89 00:10:03 GMT
From: unh!psc90!netnews@uunet.uu.net  (Remote mail paths)
Subject: Dbase II Needed

Hi,

Does anyone know where I can get a copy of Dbase II? I have P&T CP/M and
it is mentioed in the manual, and I need it to read the Simcpm.idx index
from Simtel20,. but I can not find it anywhere. Can someone suggest a
vendor, or if it is PD software?  

Deryk

  ......................................................................
  \      ...Deryk C. Marien                                            /
   \     .  Plymouth State College, Computer Services                 /
    >----.  Plymouth, NH  03264 -------------------------------------<
   /     .  UUCP: !uunet!unhd!psc90!netnews or !dartvax!psc90!netnews \
  /.........BITNET: D_MARIEN@UNHH...COMPUSERVE (72701,2200)............\

------------------------------

Date: 28 Jun 89 15:40:20 GMT
From: ima!cfisun!lakart!dg@decvax.dec.com  (David Goodenough)
Subject: New CCP features.

OK, I'm looking for ideas: I just finished seriously hacking Z80CCP
from the SIMTEL20 archives to do what _I_ think a CCP should do. Given
that it has:

	Automatic Submit operation: if a program is not found either where
		said, or on A0: it throws it at SUBMIT.COM;
	Paging TYPE;
	LIST (TYPE to LST: w/o pages);
	ERA tells you what it's going to erase, and asks about all
		wildcards, not just *.*;
	Civilised USER number handling: I can say B3:PROGRAM, and it
		does the sensible thing, also B3: does the same as
		B: / USER 3;

_AND_:

	about 256 bytes of space left over;

we come to $64,000 question. What do I put in the 256 bytes left?

Basically I'm looking for some small, neat, _USEFUL_ idea to use that
last bit of space. (If this was for the Voyager probe, I'd try to tuck
a pattern matching algorithm in, but I doubt this will ever make outer
space :-) ). It is worth noting that the USER command has been ditched
(it's now redundant), as was the CLS, which I did not consider useful.

Suggestions by E-mail to the address below, or post if you think everyone
wants some neat ideas. If I get enough response, I'll summarise.
-- 
	dg@pallio.UUCP - David Goodenough		+---+
						IHS	| +-+-+
	....... !harvard!xait!lakart!pallio!dg		+-+-+ |
AKA:	dg%pallio.uucp@cfisun.cfi.com		  	  +---+

------------------------------

Date: 30 Jun 89 21:27:07 GMT
From: tektronix!orca!frip!andrew@beaver.cs.washington.edu  (Andrew Klossner)
Subject: New CCP features.

[]

	"Civilised USER number handling: I can say B3:PROGRAM, and it
	does the sensible thing, also B3: does the same as B: / USER
	3; ...

	"the USER command has been ditched (it's now redundant)"

The USER command should not be ditched, for lots of reasons: --

  -- Losing it invalidates some shell scripts;
  -- Novices using (old!) "how to use CP/M" books will become confused;
  -- And sometimes you want to change the user number, but don't know
     (or care) what disk you're on.  (This happens mostly in shell scripts.)

  -=- Andrew Klossner   (uunet!tektronix!frip.WV.TEK!andrew)    [UUCP]
                        (andrew%frip.wv.tek.com@relay.cs.net)   [ARPA]

------------------------------

Date: Fri, 30 Jun 89 11:02 EDT
From: The really warped universe of Mike Richichi <MRICHICH%DRUNIVAC.BITNET@CUNYVM.CUNY.EDU>
Subject: QX-10/16 VT100 emulation

We are looking for a working VT100 emulator for the QX-16.  We currently
are using an MS-DOS program called Pibterm that was hacked by someone to
address the serial port properly, but this program does not properly
handle scrolling regions, and most of our VAX applications software uses
them.  Our success with other MS-DOS terminal programs has been dismal
due to the very non-MS-DOS-standard way that the 16 accesses the serial
port.

However, it seems that if you run a 16 in CP/M mode (ie, off the Z80),
you wouldn't come across this difficulty.

So the question is, does anyone know of a VT100 emulator for CP/M that:

     -Will work on the QX-10/16
     -Handles VT100 scrolling regions properly
     -Can do most video attributes (bold, inverse, underline, blinking)
     -Can support speeds up to 9600 baud (Xon-Xoff flow control is fine)
      without dropping characters

That sounds like a tall order, I know, but if the answer can be found
anywhere, I think here would be the place.

Thank you very much.

_____________________________________________________________________________
Mike Richichi,  Student Operator, DRUNIVACC      |  My opinions are mine
Box 1411, Drew U, Madison, NJ 07940, USA         |  and mine alone, unless
MRICHICH@DRUNIVAC.BITNET or MRICHICH@DREW.BITNET |  you wish to buy them.
"And they say it's a tragic story / he just wasn't there one day / but he
 went out in a Blaze Of Glory / and you and I just fade away" --Joe Jackson
-----------------------------------------------------------------------------


------------------------------

Date: 30 Jun 89 16:02:48 GMT
From: vsi1!daver!mips!vaso@apple.com  (Vaso Bovan)
Subject: terminal emulator, v100

In article <413@wicat.UUCP> keithm@wicat.UUCP (Keith McQueen) writes:
>>Also, what the hell is the 8/16 Northstar?  Is it an IBM compatible or does
>>just run a 16 bit CPM?
>>
>
>In the early days of 8086, Northstar experimented with it by
>creating 8088 boards for the Advantage (and I think for the
>Horizon, but don't quote me on it).  The Advantage board
>would run generic MS-DOS, but was not PC compatible.
>
That experiment just about ruined the company. I was an employee at the time.
Management pushed this "semi clone" against the advice of senior engineers,
who wanted NorthStar to develop a true clone, or to work on other proprietary
designs. So much time and resources was spent on this kluge board that
NorthStar could not meet the growing IBM/DOS threat effectively. From then on
NorthStar was doomed.

------------------------------

End of INFO-CPM Digest V89 Issue #145
*************************************
 3-Jul-89 10:44:59-MDT,5895;000000000000
Mail-From: KPETERSEN created at  3-Jul-89 10:31:43
Return-Path: <INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL>
Date: Mon,  3 Jul 89 10:31:42 MDT
From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL
Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL
Subject: INFO-CPM Digest V89 #146
To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL

INFO-CPM Digest             Mon,  3 Jul 89       Volume 89 : Issue 146

Today's Topics:
                               8" disks
                       ANSI X. 3.64 and CP/M 3
                       INFO-CPM Digest V89 #142
                   Info wanted about Alspa Zero-Net
                      Z280 Ultraboard? (2 msgs)
----------------------------------------------------------------------

Date: 30 Jun 89 11:16:48 GMT
From: ssbell!mcmi!amperif!unocss!mlewis@uunet.uu.net  (Marcus S. Lewis)
Subject: 8" disks

Can anybody tell me the proper stepping rate for a Siemans FD200-2
8" disk drive?
Thanks in advance.
Marc


-- 
Na khuya mne podpis'?                 |  Internet: cs057@zeus.unl.edu      
                                      |  UUCP:     uunet!btni!unocss!mlewis
Go for it!                            |  Bitnet:   CS057@UNOMA1            
---------------------------------------------------------------------------

------------------------------

Date: 1 Jul 89 07:18:45 GMT
From: amdahl!oliveb!tymix!tardis!jms@ames.arc.nasa.gov  (Joe Smith)
Subject: ANSI X. 3.64 and CP/M 3

In article <8906290704.AA24819@ucbvax.Berkeley.EDU> JSHIN@HAMPVMS.BITNET (The Game Master) writes:
>Does CP/M 3 support graphics?

  No.  It allows you to use more than 64K of RAM and makes it easier to
  use other USER numbers.

>Also, I need to know the escape sequences for ANSI X. 3.64, which
>I think does color graphics.  Hey, standard is there to be used, no?

X3.64 does not do graphics like circles and diagonal lines and such.
It does define how to invoke color text.  ("$" below means the ESC char)
  $[30m = use black text	$[40m = use black background
  $[31m = use red text		$[41m = use red background
  $[32m = use green text	$[42m = use green background
  $[33m = use yellow text	$[43m = use yellow background
  $[34m = use blue text		$[44m = use blue background
  $[35m = use magenta text	$[45m = use magenta background
  $[36m = use cyan text		$[46m = use cyan background
  $[37m = use white text	$[47m = use white background.

If your screen normally has white text on a black background, you can
make it inverse video by using either "$[7m" or "$[30;47m".  For other
escape sequences, check the manual on any VT100 compatible terminal.

-- 
Joe Smith (408)922-6220 | SMTP: JMS@F74.TYMNET.COM or jms@tymix.tymnet.com
McDonnell Douglas FSCO  | UUCP: ...!{ames,pyramid}!oliveb!tymix!tardis!jms
PO Box 49019, MS-D21    | PDP-10 support: My car's license plate is "POPJ P,"
San Jose, CA 95161-9019 | narrator.device: "I didn't say that, my Amiga did!"

------------------------------

Date: 2 Jul 89 21:43:46 GMT
From: pacbell!sactoh0!ianj@ames.arc.nasa.gov  (Ian R. Justman)
Subject: INFO-CPM Digest V89 #142

In article <8906290704.AA24802@ucbvax.Berkeley.EDU>, GHK@NCCIBM1.BITNET writes:
>   Due to the slow clock speeds of the 6502, which does all of the I/O
>  for the PCPI APPLICARD, it is very capable of loosing characters.

I don't think you understood what I said.  I said I had a SOFTcard
which is from Microsoft and not the Applicard which is from PCPI.
However, I'll take what you said into consideration, even though
I'm stuck with a SoftCard.

-- 
Home:   Ian Justman       |UUCP:                 |"One of the few
6612 Whitsett Drive       |                      |die-hard CP/M
North Highlands, CA  95660| pacbell!sactoh0!ianj |addicts left on this
(916) 344-5360            |                      |planet"

------------------------------

Date: 29 Jun 89 03:28:17 GMT
From: ddp100%psuvm.BITNET@jade.Berkeley.EDU
Subject: Info wanted about Alspa Zero-Net

   A friend recently acquired an Alspa Zero-Net system. The system disk
seems to be crashed, unfortunately. From what we can tell in the manual we
have, it will boot from Turbodos or CP/M. We have tried a DS/DD CP/M disk
but it would not boot. Do we need a special CP/M format? These are 8 inch
disks, by the way. Alspa seems to have gone out of business in mid 83 or
at least thats where their ads drop off. I'd really appreciate any info.
or suggestions anyone might have on this system. Thanks in advance.

     Reply to DDP100@PSUVM.BITNET if possible.

------------------------------

Date: 1 Jul 89 15:58:23 GMT
From: rebel!hisata!doug@gatech.edu  (Doug Allison)
Subject: Z280 Ultraboard?

A few years ago, I heard that High Tech Research was working on a 
Z280 board for the CP/M Kaypro.  The claims about it seemed pretty
grandiose, and I haven't heard anything about it since.

Does anybody know anything about this board?  Is it on the market?
Is it everything it was claimed to be???

Thanks!

Doug Allison
UUCP:{...}!gatech!hisata!doug
 

------------------------------

Date: 2 Jul 89 16:09:51 GMT
From: paravia@csd4.milw.wisc.edu  (Mark David Kakatsch)
Subject: Z280 Ultraboard?

Speaking of Z280's, there was an article on how to build your own '280
CPU board(S-100)...It's pretty simple, and uses only 16 TTL chips+'280.
So does anyone know of a source for the chip? I haven't found it in any
standard catalog(Jameco, JDR, DigiKey, etc...). IS it available, and if so,
how much? Thanks...

Mark



--
| Albert Einstein got his name after he got| Mark D. Kakatsch                 |
| smashed from drinking only only one stein| paravia@csd4.milw.wisc.edu       |
| of beer. Hence; Albert EinStein.         | ...uwmcsd1!uwmcsd4!paravia       |

------------------------------

End of INFO-CPM Digest V89 Issue #146
*************************************
 5-Jul-89 20:33:33-MDT,9987;000000000000
Return-Path: <INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL>
Date: Wed,  5 Jul 89 19:09:25 MDT
From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL
Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL
Subject: INFO-CPM Digest V89 #147
To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL

INFO-CPM Digest             Wed,  5 Jul 89       Volume 89 : Issue 147

Today's Topics:
                   Info wanted about Alspa Zero-Net
                    Search for First in CP/M BDOS
                             The Real MEX
                            Unix. (2 msgs)
                    Wanted info on DIRECT OA1025.
                           Z280 Ultraboard?
                       Z80 for DEC VT180 Robin
----------------------------------------------------------------------

Date: 5 Jul 89 15:28:24 GMT
From: sumax!amc-gw!sigma!bill@beaver.cs.washington.edu  (William Swan)
Subject: Info wanted about Alspa Zero-Net

In article <89179.232817DDP100@PSUVM> DDP100@PSUVM.BITNET writes:
>   A friend recently acquired an Alspa Zero-Net system. The system disk
>seems to be crashed, unfortunately. From what we can tell in the manual we
>have, it will boot from Turbodos or CP/M. We have tried a DS/DD CP/M disk
>but it would not boot. Do we need a special CP/M format? These are 8 inch
>disks, by the way. Alspa seems to have gone out of business in mid 83 or
>at least thats where their ads drop off. I'd really appreciate any info.
>or suggestions anyone might have on this system. Thanks in advance.

The Alspa Zero-Net will boot TurboDos, I know, and might boot CP/M if the
BIOS was ever created for it (to my knowledge it never was, at least by
Alspa Computer, but I left there in early '83, a couple years before the
actual demise of the corporation - not that there was much doubt about the
eventual outcome long before then - but I digress...).

The Zero-Net disk formats are a bit unusual (Ron Alspaugh's forte -
optimising disk formats for speed :-), so you're not going to be able to
boot from just any DS/DD disk. A brief explanation:

First, the sector skew is encoded in the track image. In a "normal" disk,
the sector numbers are encoded 1-2-3-..., in the Zero-Net (actually all
Alspa DD formats are similar) they are encoded something like 1-4-7-2-5...
This eliminates the need for skew tables! :-) Still, the only penalty to
you for using an incorrectly sector-labelled disk would be slower 
performance.

A bigger problem arises in identifying the disk type. The Zero-Net used an
awful scheme the particulars of which I've forgotten over the past 6+ years.
I don't think it used the ACI-1/2 scheme of encoding the disk format in byte
0x7F of sector 1 track 0. As I recall (I'd have to look it up to be sure) it
saved it in the sector header, under disk SIDE! It goes something like: 0 
(and 1?) are standard CP/M SS/SD (IBM 3740) format, 2 & 3 are DS/SD, 3 & 4
are DD/SS, 5 & 6 are DD/DS (I seem to remember it went higher, but memory
escapes me right now).

The Zero-Net boots from a disk differently than most CP/M systems, which
normally boot from a reserved track and sector. Under Zero-Net, there are
no reserved tracks - excepting, of course, standard SS/SD disks. Instead,
the boot ROM, which has knowledge of all the disk formats, looks for a file
with a particular name, something like 0BOOT.COM, and loads and executes it. 
That file, the boot loader, then looks for another file presumably containing
the TurboDOS system image, and loads that.

All this by way of saying that you either need the two files on a SS/SD disk
to get going, or an Alspa-formatted DD disk. If you have other Alspa floppies
around, you might try them in case the system files are present on them.

Otherwise, there are two courses of action open to you:

1. Send me e-mail. I may have a Zero disk around (if I can get my ACI-2
TurboDOS system to boot). It's likely to be a very old and buggy version,
unhappily. The TurboDOS writers were madly revising the system at the time,
and the version 1.22? that I've an image of may be very old. 

2. Join the Alspa mailing list (which has been very quiet for several
months). I believe there are some Zero-Net owners there, and they may have
the scoop on more recent version. From my .mailrc file (edited...):
To join the list send request to:
	...!ssyx.ucsc.edu!alspa-users-request
For submissions to the list:
	...!ssyx.ucsc.edu!alspa-users


I would encourage followups to this to be conducted on the mailing list.


-- 
Bill Swan  entropy.ms.washington.edu!sigma!bill  Send postal address for info:
	Innocent but in prison in Washington State for 13.5 years:
	Ms. Debbie Runyan: incarcerated 01/1989, scheduled release 07/2002.
	                   In now:  0 years,  5 months,  2 weeks,  1 day. 

------------------------------

Date: Tue, 4 Jul 89 22:47 EST
From: "Hey, I'm from Korea, too!" <JSHIN%HAMPVMS.BITNET@CUNYVM.CUNY.EDU>
Subject: Search for First in CP/M BDOS

A quick question...

Does the "Search for First" function (#17) in the BDOS call
accept wildcards as FCB entries?  Should the caller convert
*'s to ???'s, or does the BDOS take care of that?

IF BDOS accepts '*' , does it accept it even if it is NOT the last character?

Thank you very much.

               - John Shin

------------------------------

Date: Wed, 05 Jul 89 12:33:52 EST
From: "Jay Sage" <SAGE@LL.LL.MIT.EDU>
Subject: The Real MEX

   John Shin asked "are the files in the MEX directory the real MEX?"  Yes
and no.  They are an early public-domain release of MEX (version 1.14).  The
VT100 emulation and other advanced features are only in the commercial
version of MEX (1.65 currently).  That version costs $60.  MEX has a number
of bugs but is really an outstanding program.  That's what I use on all my
CP/M and MS-DOS computers.


------------------------------

Date: Mon, 3 Jul 89 16:33 EST
From: "Hey, I'm from Korea, too!" <JSHIN%HAMPVMS.BITNET@CUNYVM.CUNY.EDU>
Subject: Unix.

O.K.  Here's a real good one for you.  Laugh your heart out...

   Has anyone ported Unix to a CP/M (or any Z-80) machine?
Or, Is there a C compiler that is big and generic enough (or a Unix source
that is generic enough) to compile the system?

Heeeeeeeeee.............

                 -John Shin  (JShin@HampVMS)

P.S.  Hey; don't give me anything like "Z80 is too slow; too weak;  too
small," 'cause, architecturally speaking, with current technology, there
is no problem with coming up with a Z80 that runs at 100 MHz, and we all
know about memory mappers, don't we?  How about an FPU?

------------------------------

Date: 5 Jul 89 14:53:43 GMT
From: pilchuck!amc-gw!sigma!bill@uunet.uu.net  (William Swan)
Subject: Unix.

In article <8907040701.AA14772@ucbvax.Berkeley.EDU> JSHIN@HAMPVMS.BITNET ("Hey, I'm from Korea, too!") writes:
>   Has anyone ported Unix to a CP/M (or any Z-80) machine?

The answer is yes!

At least one version was distributed on the net recently under the name UZI.
I haven't tried it out so I can't comment on whether (or how well) it works,
although I recall it really needed a fast disk because of the swapping it 
does.


-- 
Bill Swan  entropy.ms.washington.edu!sigma!bill  Send postal address for info:
	Innocent but in prison in Washington State for 13.5 years:
	Ms. Debbie Runyan: incarcerated 01/1989, scheduled release 07/2002.
	                   In now:  0 years,  5 months,  2 weeks,  1 day. 

------------------------------

Date: 4 Jul 89 09:17:30 GMT
From: mcvax!ukc!mucs!aek@uunet.uu.net  (Alan Knowles)
Subject: Wanted info on DIRECT OA1025.

I have recently acquired a S/Hand CP/M luggable (if you are very strong)
computer. It is manufactured by DIRECT Inc. and is model OA1025. It
obviously has many features but I have no documentation (particularly about
the screen codes). Some I have determined by examining code provided on the
system disc, but my main problem is how to get special screen attributes
(e.g. inverse video) to survive beyond a CR/LF. 

Any assistance in this area would be appreciated as would information as to
how to obtain a user handbook and/or a circuit diagram.

A private email reply would be most appropriate since I doubt there are
many people interested in this machine and its peculiarities.


Dr.A.E.Knowles
Department of Computer Science
The University of Manchester
Oxford Road
Manchester M13 9PL

Tel. (061) 275 6185

Electronic Mail addresses:

JANET		aek@uk.ac.man.cs.ux
UUCP		...!mcvax!ukc!man.cs.ux!aek
ARPA            aek@ux.cs.man.ac.uk@nsfnet-relay.ac.uk

------------------------------

Date: 4 Jul 89 16:03:14 GMT
From: ssbell!mcmi!amperif!unocss!mlewis@uunet.uu.net  (Marcus S. Lewis)
Subject: Z280 Ultraboard?

From article <3179@csd4.milw.wisc.edu>, by paravia@csd4.milw.wisc.edu (Mark David Kakatsch):
> Speaking of Z280's, there was an article on how to build your own '280
> CPU board(S-100)...It's pretty simple, and uses only 16 TTL chips+'280.

The article is in issue 2 of SuperMicro, pg 63.  At the end of the article
it says to call Zilog for information about the chip.
Marc

-- 
Na khuya mne podpis'?                 |  Internet: cs057@zeus.unl.edu      
                                      |  UUCP:     uunet!btni!unocss!mlewis
Go for it!                            |  Bitnet:   CS057@UNOMA1            
---------------------------------------------------------------------------

------------------------------

Date: Wed, 05 Jul 89 12:33:12 EST
From: "Jay Sage" <SAGE@LL.LL.MIT.EDU>
Subject: Z80 for DEC VT180 Robin

   Richard Secrist wrote:

>> An alternative could be to pop a Z-80 in his DEC Robin (aka VT-180),
>> but I never heard of anybody trying it.

Why would anyone want to try that -- the VT180 Robin already uses a Z80!


------------------------------

End of INFO-CPM Digest V89 Issue #147
*************************************
10-Jul-89 01:18:02-MDT,6455;000000000000
Return-Path: <INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL>
Date: Mon, 10 Jul 89 01:00:10 MDT
From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL
Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL
Subject: INFO-CPM Digest V89 #148
To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL

INFO-CPM Digest             Mon, 10 Jul 89       Volume 89 : Issue 148

Today's Topics:
                           LASM.ASM needed
                    Search for First in CP/M BDOS
                       Term prog for C128 CP/M
                            Unix. (2 msgs)
                     UUCP clone for CP/M (2 msgs)
----------------------------------------------------------------------

Date: 7 Jul 89 14:41
From: w_smith@wookie.enet.dec.com (Willie Smith, LTN Components Eng.)
Subject: LASM.ASM needed

As one of the CP/M 8 inch distributors for Kermit, I find that
I'm missing LASM.ASM.  Unfortunately, so are the Kermit folk
at Columbia.  Does anyone have a source for it?  Could someone
mail it to me or let me know where there is a BBS anywhere at
all where I could pick it up?
 
BTW:  If anyone wants the complete Kermit distribution on
8 inch SSSD (IBM 3740) disks, please send 7 preformatted
(watch my lips move) 8 inch single sided single density
(CP/M standard interchange format) to the mail address below
with a prepaid return mailer.
 
Willie SMith
w_smith@wookie.dec.com
w_smith%wookie.dec.com@decwrl.dec.com
{Usenet!Backbone}!decwrl!wookie.dec.com!w_smith
[".dec.com" may be replaced by ".enet.dec.com" in some or all of the above]
 
Paper mail to:
 
Willie Smith
P.O. Box 150
Hamilton, MA  01936

------------------------------

Date: 6 Jul 89 17:23:36 GMT
From: cs.utexas.edu!sun-barr!newstop!texsun!pollux!attctc!bobc@tut.cis.ohio-state.edu  (Bob Calbridge)
Subject: Search for First in CP/M BDOS

In article <8907060704.AA26910@ucbvax.Berkeley.EDU>, JSHIN@HAMPVMS.BITNET ("Hey, I'm from Korea, too!") writes:
` 
` A quick question...
` 
` Does the "Search for First" function (#17) in the BDOS call
` accept wildcards as FCB entries?  Should the caller convert
` *'s to ???'s, or does the BDOS take care of that?
` 
` IF BDOS accepts '*' , does it accept it even if it is NOT the last character?
` 
` Thank you very much.
` 
`                - John Shin


Its been a while since I've done any programming using FINDFIRST but as I 
remember you do need to place the '?'s in the FCB.  I seem to recall that
the parsing function (152?) could help to expand the '*'s if you are using
CP/M 3.0.

Bob

-- 
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
=             I know it's petty..........                                     =
-                  But I have to justify my salary!                           -
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

------------------------------

Date: SAT 08 JUL 1989 16:20:00 CDT
From: Brian <S1CH%SDSUMUS.BITNET@VM1.NoDak.EDU>
Subject: Term prog for C128 CP/M

What would be a good term program that runs under C-128 CP/M?
I've tried some term programs, but couldn't get it figured out
how to set them up to work on the C-128. Any available on the
SIMTEL20 archives?

 ------------------------------
 Brian Piersel
 BITNET:    S1CH@SDSUMUS
 INTERNET:  S1CH@SDSUMUS.BITNET

 "If winning is not important, why keep score?"

------------------------------

Date: 6 Jul 89 16:46:43 GMT
From: ssbell!mcmi!amperif!unocss!mlewis@uunet.uu.net  (Marcus S. Lewis)
Subject: Unix.

From article <8907040701.AA14772@ucbvax.Berkeley.EDU>, by JSHIN@HAMPVMS.BITNET ("Hey, I'm from Korea, too!"):
  
>    Has anyone ported Unix to a CP/M (or any Z-80) machine?
> Or, Is there a C compiler that is big and generic enough (or a Unix source
> that is generic enough) to compile the system?
 
Yes, there is a Unix for Z-80.  It's called UZI (neat name, yes?)
I have the source, I think Simtel has it as well.  It is in C with 
a potload of inline assembler.  It was posted to comp.unix.sources
a few months ago.
Laugh, and let me know if it works.

Marc

-- 
Na khuya mne podpis'?                 |  Internet: cs057@zeus.unl.edu      
                                      |  UUCP:     uunet!btni!unocss!mlewis
Go for it!                            |  Bitnet:   CS057@UNOMA1            
---------------------------------------------------------------------------

------------------------------

Date: 6 Jul 89 16:19:35 GMT
From: ima!cfisun!lakart!dg@decvax.dec.com  (David Goodenough)
Subject: Unix.

JSHIN@HAMPVMS.BITNET ("Hey, I'm from Korea, too!") sez:
> 
> O.K.  Here's a real good one for you.  Laugh your heart out...
> 
>    Has anyone ported Unix to a CP/M (or any Z-80) machine?
> Or, Is there a C compiler that is big and generic enough (or a Unix source
> that is generic enough) to compile the system?

Yes.

It's called U.Z.I. (Unix Z80 Implementation). Source is on Simtel (I think),
also on GEnie, or try this BBS:

(617) 965 7046
-- 
	dg@lakart.UUCP - David Goodenough		+---+
						IHS	| +-+-+
	....... !harvard!xait!lakart!dg			+-+-+ |
AKA:	dg%lakart.uucp@xait.xerox.com		  	  +---+

------------------------------

Date: 9 Jul 89 14:55:20 GMT
From: lamc!kdavis@apple.com  (Ken Davis)
Subject: UUCP clone for CP/M

Has anyone come up with a uucp like clone for transferring mail
from a cpm machine to unix and back? Would be very interested in
obtaining it.

-- 
Ken Davis - W6RFN      San Francisco, California
UUCP: (apple, pyramid, netsys, pacbell, hoptoad}!lamc!kdavis
DIALCOM: 164:MDU0116    Internet: lamc!kdavis%apple.com

------------------------------

Date: 9 Jul 89 20:20:53 GMT
From: ea.ecn.purdue.edu!wieland@ee.ecn.purdue.edu  (Jeffrey J Wieland)
Subject: UUCP clone for CP/M

In article <202105@lamc.UUCP> kdavis@lamc.UUCP (Ken Davis) writes:
>Has anyone come up with a uucp like clone for transferring mail
>from a cpm machine to unix and back? Would be very interested in
>obtaining it.

I would also be interested in this.  Has anyone looked at UUPC to
see if it could be ported to a CP/M compatible environment?  It
might be easier to make something like this work under the 
Z-System then under standard CP/M-80.

			Jeff Wieland
		    wieland@ecn.purdue.edu

------------------------------

End of INFO-CPM Digest V89 Issue #148
*************************************
12-Jul-89 02:25:14-MDT,8600;000000000000
Return-Path: <INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL>
Date: Wed, 12 Jul 89 01:00:14 MDT
From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL
Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL
Subject: INFO-CPM Digest V89 #149
To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL

INFO-CPM Digest             Wed, 12 Jul 89       Volume 89 : Issue 149

Today's Topics:
                         CP/M Kermit on C128
                         Disk Parameter Block
                             ST-125 drive
                     UUCP clone for CP/M (2 msgs)
                What are ????????.?Z? files? (2 msgs)
----------------------------------------------------------------------

Date: MON 10 JUL 1989 22:04:00 CDT
From: Brian <S1CH%SDSUMUS.BITNET@VM1.NoDak.EDU>
Subject: CP/M Kermit on C128

I just downloaded CP4-C128.LBR from the <CPM.C128> directory
on SIMTEL20. It works, but I discovered it doesn't handle
1200 baud! Is there something else I need to do, or is there
a newer version that does handle 1200 baud?

 ------------------------------
 Brian Piersel
 BITNET:    S1CH@SDSUMUS
 INTERNET:  S1CH@SDSUMUS.BITNET

 "The needs of the many outweigh the needs of the few, or the one."

------------------------------

Date: TUE 11 JUL 1989 21:33:00 CDT
From: Brian <S1CH%SDSUMUS.BITNET@VM1.NoDak.EDU>
Subject: Disk Parameter Block

I have been working on patching the disk parameter block (dpb)
on C-128 CP/M to allow the full capacity of 3.5" disks to be
used. I think I got the parameters right, but some of them
I'm not really sure what they are. If anyone knows more about
the dpb, let me know. Respond directly to me if possible. I don't
always get mail that comes through some gateways, so if you don't
hear back from me within about a week, better post to the list
instead. Thanks in advance...

 ------------------------------
 Brian Piersel
 BITNET:    S1CH@SDSUMUS
 INTERNET:  S1CH@SDSUMUS.BITNET

 "People who know nothing, doubt nothing."

------------------------------

Date: 10 Jul 89 15:33:01 GMT
From: ea.ecn.purdue.edu!wieland@ee.ecn.purdue.edu  (Jeffrey J Wieland)
Subject: ST-125 drive

I have been looking for a hard drive to add to my CP/M Kaypro, and one
of the drives I have been considering is the Seagate St-125.  It sounds
perfect for what I need: 3.5", 40 or 28 ms access, shock mount, low
power.  But, considering the reputation that the 225's (and other 
Seagates) have earned, I am reluctant to plunk down my hard-earned
bucks on a drive that is going to self-destruct.  Does anyone have
any experience with the 3.5" drives from Seagate?

			    Jeff Wieland
			wieland@ecn.purdue.edu

------------------------------

Date: 10 Jul 89 18:59:31+0200
From: <wyle@inf.ethz.ch>
Subject: UUCP clone for CP/M

>X-Mailer: Mail User's Shell (6.5.6 6/30/89)

me too.

(What about it, Dave?  Are you going to release your cp/m 'g' protocol
yet?)

I use xmodem and a couple of scripts (started manually on the cp/m
machine) to download stuff from the Unix host, and upload stuff I've
edited locally.  I think it would be a piece of cake to write a
terminal emulator script to call a unix host, log in, invoke xmodem,
download the spooled mail/news or whatever, then delete them from the
spool dir.  It might even be possible to have a restricted shell which
can run only a few commands (rx, sx, rm) on the unix side...

The same script could then take the local cp/m files, upload them, and
pipe them through mail or inews -h and then delete them on the Unix
side.

I assume that since cp/m is not multi-tasking - multi-user that these
up- and download scripts would always have to be invoked manually.  On
the other hand, if the Unix host could poll the cp/m machine running a
bbs system...

I assume that Dave Goodenough has these scripts for qterm; I further
speculate that someone has MEX scripts to do the same sort of thing.
You don't have to run uucp to network to another machine.  Some fancy
scripts (with error-recovery, security, etc) will give you the same
effect.

Of course you'd have to have some code (probably shell scripts) on the
Unix side of the system, but I still think the project is pretty easy.

My cp/m box is a laptop (Bondwell Model 2).  I don't have the need or
the desire to download Unix mail or news and then upload replies,
because it's easier to use the machine on my desk at work.


------------------------------

Date: 10 Jul 89 22:58:44 GMT
From: sumax!amc-gw!sigma!bill@beaver.cs.washington.edu  (William Swan)
Subject: UUCP clone for CP/M

In article <13227@ea.ecn.purdue.edu> wieland@ea.ecn.purdue.edu.UUCP (Jeffrey J Wieland) writes:
>>Has anyone come up with a uucp like clone for transferring mail
>>from a cpm machine to unix and back? Would be very interested in
>>obtaining it.
>I would also be interested in this.  Has anyone looked at UUPC to
>see if it could be ported to a CP/M compatible environment?  It
>might be easier to make something like this work under the 
>Z-System then under standard CP/M-80.
  
  
The answer to the above question is a qualified yes. I have a port of UUPC to
CP/M-80 (using Aztec C), but it is not fully debugged.  Actually, it's only
barely debugged - I haven't gotten it through the dial-up sequence yet. :-)
  
It's also a port of the original version released to the net two years ago,
and I understand that UUPC has been revised and improved since then.
  
Progress is likely to be slow as I am temporarily working two jobs and don't
have the time to futz with it right now. (This is my third run at the problem,
and the second promising one - I have *some* idea of the rough road ahead. :-)
  
There may be another version available soon, but the developer of that version
will have to speak for himself, if he so chooses. One way or another, we'll
have it!!
  
  
  
-- 
Bill Swan  entropy.ms.washington.edu!sigma!bill  Send postal address for info:
	Innocent but in prison in Washington State for 13.5 years:
	Ms. Debbie Runyan: incarcerated 01/1989, scheduled release 07/2002.
	                   In now:  0 years,  5 months,  2 weeks,  6 days.

------------------------------

Date: 11 Jul 89 16:40:54 GMT
From: rti!sunpix!matthew@mcnc.org  ( Sun Visualization Products)
Subject: What are ????????.?Z? files?

After a long time away from CP/M I'm getting my feet wet again.  I bought an
Apple /// with Softcard over the Memorial Day weekend.

I've been perloining the local BBS's for interesting programs and utilities.
Now, I know that ????????.?Q? files are files that have been compressed with
SQ and can be uncompressed with USQ.  But, I've scene a number of files with
????????.?Z? file names. What programs are these compressed by.

Second question.  I can find a few programs that will de-ARC *.ark files 
(compatible with MS-DOS *.arc files).  Are there any CP/M programs to create
MS-DOS compatible archives?

Third question (related to the first).  Any LU type program that handles 
library management, and automatically squeezes/unsqueezes files?


-- 
Matthew Lee Stier                         |
Sun Microsystems ---  RTP, NC  27709-3447 |        "Wisconsin   Escapee"
uucp: { sun, mcnc!rti }!sunpix!matthew    |
phone: (919) 469-8300 fax: (919) 460-8355 |

------------------------------

Date: 11 Jul 89 16:40:54 GMT
From: rti!sunpix!matthew@mcnc.org  ( Sun Visualization Products)
Subject: What are ????????.?Z? files?

After a long time away from CP/M I'm getting my feet wet again.  I bought an
Apple /// with Softcard over the Memorial Day weekend.

I've been perloining the local BBS's for interesting programs and utilities.
Now, I know that ????????.?Q? files are files that have been compressed with
SQ and can be uncompressed with USQ.  But, I've scene a number of files with
????????.?Z? file names. What programs are these compressed by.

Second question.  I can find a few programs that will de-ARC *.ark files 
(compatible with MS-DOS *.arc files).  Are there any CP/M programs to create
MS-DOS compatible archives?

Third question (related to the first).  Any LU type program that handles 
library management, and automatically squeezes/unsqueezes files?


-- 
Matthew Lee Stier                         |
Sun Microsystems ---  RTP, NC  27709-3447 |        "Wisconsin   Escapee"
uucp: { sun, mcnc!rti }!sunpix!matthew    |
phone: (919) 469-8300 fax: (919) 460-8355 |

------------------------------

End of INFO-CPM Digest V89 Issue #149
*************************************
13-Jul-89 20:36:25-MDT,8051;000000000000
Return-Path: <INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL>
Date: Thu, 13 Jul 89 20:00:38 MDT
From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL
Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL
Subject: INFO-CPM Digest V89 #150
To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL

INFO-CPM Digest             Thu, 13 Jul 89       Volume 89 : Issue 150

Today's Topics:
                     Kaypro II parts, make offer
                      S-100 CP/M stuff for sale
                          Tabby / Ybbat mail
               uupc for cp/m?  Roll your own. (2 msgs)
                     What are ????????.?Z? files?
----------------------------------------------------------------------

Date: Thu 13 Jul 89 15:17:19-EST
From: Gern <GUBBINS@TOPS20.RADC.AF.MIL>
Subject: Kaypro II parts, make offer

I have gutted an unloved Kaypro II computer and put a Zenith Z-100 computer
inside it.  I would like to find a good home for the gutted remains of
the Kaypro II.   All I would really want for the following is Shipping
and handling costs.  I would like to sell all the parts to one person.

Good Motherboard, no ICs
(2) Single Sided Full Height Floppy Disk Drives
Keyboard board with ESC key busted
Kaypro Users Guide
Kaypro Dealer Tech Reference Manual and schematics
CP/M Guide

The drives worked the last I knew.

Say, $20.00 takes all shipped to anywhere in the USA.

Cheers,
Gern
-------

------------------------------

Date: 12 Jul 89 19:32:24 GMT
From: edsews!rcsuna!rhaar@uunet.uu.net  (Bob Haar CS50)
Subject: S-100 CP/M stuff for sale

I am putting my S-100 CP/M computer system up for sale.

hardware:

	Compupro S-100 rack-mount cabinet (the original "boat-anchor")

	Tarbell CPU I/O board, model 3033
		Z80, 2 serial ports, memory management, etc.

	2 Seattle Computer 64K static RAM boards

	Tarbell Double Density floppy disk controller

	SD Systems VDB8024 video display board

	Compupro System SUpport 1 board (serial I/O + clock)

	Cromenco 8PIO parallel I/O board

	2 Siemans FDD100-8 8" SSDD floppy drives in rack-mount cabinet

	BMC green phosphor monitor
	
	Keytronics VT100-layout keyboard

Software:

	CP/M Plus (v. 3.0)
	
	CP/M 2.2

	ZCPR3 (Z3PLUS auto-install version)

	BDS C v 1.5

	WORDSTAR CP/M release 4.0

	CompuView VEDIT v 1.16

	lots of PD software including Kermit and MEX

All was working when I last ran the system, but is being offered
on an AS-IS basis.

The system is currently mounted in a short 19" rack which I will
include if sold in the Detroit area, but is too big to ship easily.

Make me an offer. I would like to sell the whole thing as a unit, but
will sell pieces if I don't get an attractive offer for the whole thing.

	Robert Haar

	phone: (313) 986-1412 (work)
		     651-4183 (home)

	UUCP: edsews!rphroy!rcsuna!rhaar
	CSNET: HAAR@GMR.COM

------------------------------

Date: 11 Jul 89 16:36:13 GMT
From: ima!cfisun!lakart!dg@decvax.dec.com  (David Goodenough)
Subject: Tabby / Ybbat mail

OK, a very simple request:

Can anyone give me a phone number (data) of a BBS somewhere in the USA
(preferably, Boston, MA, New England, East Coast, ALL USA, in that order)
that is running TABBY mail, so I can talk to the sysop. I'm looking into a
TABBY / UUCP gateway (!) but I can't get anything at all about what makes
TABBY mail go - no documentation, nothing. If pressed I will have to start
running the programs out of YBBAT.ARK, and just do it on the basis of
"monkey see, monkey do", but I'd really rather avoid doing this.

P.S. respond by E-mail, and use this route:

.....!harvard!cfisun!lakart!pallio!dg

since xait aren't quite working right.
-- 
	dg@pallio.UUCP - David Goodenough		+---+
						IHS	| +-+-+
	....... !harvard!xait!lakart!pallio!dg		+-+-+ |
AKA:	dg%pallio.uucp@cfisun.cfi.com		  	  +---+

------------------------------

Date: 13 Jul 89 18:18:16 GMT
From: rochester!ken@cu-arpa.cs.cornell.edu  (Ken Yap)
Subject: uupc for cp/m?  Roll your own.

John Gilmore's uuslave sources had some #ifdef'ed code for CP/M.
I have not tried it and I have no idea if it works and if so
which compiler is needed.

------------------------------

Date: 10 Jul 89 17:03:26 GMT
From: mcvax!cernvax!ethz!ethz-inf!wyle@uunet.uu.net  (Mitchell Wyle)
Subject: uupc for cp/m?  Roll your own.

kdavis writes:
> Has anyone come up with a uucp like clone for transferring mail
> from a cpm machine to unix and back? Would be very interested in
> obtaining it.

(What about it, Dave?  Are you going to release your cp/m 'g' protocol
yet?)

I use xmodem and a couple of scripts (started manually on the cp/m
machine) to download stuff from the Unix host, and upload stuff I've
edited locally.  I think it would be a piece of cake to write a
terminal emulator script to call a unix host, log in, invoke xmodem,
download the spooled mail/news or whatever, then delete them from the
spool dir.  It might even be possible to have a restricted shell which
can run only a few commands (rx, sx, rm) on the unix side...

The same script could then take the local cp/m files, upload them, and
pipe them through mail or inews -h and then delete them on the Unix
side.

I assume that since cp/m is not multi-tasking - multi-user that these
up- and download scripts would always have to be invoked manually.  On
the other hand, if the Unix host could poll the cp/m machine running a
bbs system...

I assume that Dave Goodenough has these scripts for qterm; I further
speculate that someone has MEX scripts to do the same sort of thing.
You don't have to run uucp to network to another machine.  Some fancy
scripts (with error-recovery, security, etc) will give you the same
effect.

Of course you'd have to have some code (probably shell scripts) on the
Unix side of the system, but I still think the project is pretty easy.

My cp/m box is a laptop (Bondwell Model 2).  I don't have the need or
the desire to download Unix mail or news and then upload replies,
because it's easier to use the machine on my desk at work.
-- 
-Mitchell F. Wyle
Institut fuer Informationssysteme         wyle@inf.ethz.ch 
ETH Zentrum / 8092 Zurich, Switzerland    +41 1 256 5237

------------------------------

Date: 12 Jul 89 19:51:36 GMT
From: oliveb!amdahl!pacbell!sactoh0!ianj@apple.com  (Ian R. Justman)
Subject: What are ????????.?Z? files?

In article <685@greens.UUCP>, matthew@sunpix.UUCP ( Sun Visualization Products) writes:
> Now, I know that ????????.?Q? files are files that have been compressed with
> SQ and can be uncompressed with USQ.  But, I've scene a number of files with
> ????????.?Z? file names. What programs are these compressed by.

Those files are compressed with a program called "CRUNCH".  You use
a program called "UNCRUNCH" to uncompress them.  Those programs are
self-documenting, so by typing "UNCRUNCH", "CRUNCH", "UNCR", "CR",
or whatever, you will get a syntatical diagram on how to use the
program.
> 
> Second question.  I can find a few programs that will de-ARC *.ark files 
> (compatible with MS-DOS *.arc files).  Are there any CP/M programs to create
> MS-DOS compatible archives?
> 

Yes there is.  It's a program called ARKxxx where xxx is the
revision number.

> Third question (related to the first).  Any LU type program that handles 
> library management, and automatically squeezes/unsqueezes files?

There is a program called NULU151 which does the job nicely.  It
will not only extract members of an .LBR file, it will unsqueeze
them, too.  However, I would like to see an uncrunching facility
added to it.

-- 
Home:   Ian Justman       |UUCP:                 |"One of the few
6612 Whitsett Drive       |                      |die-hard CP/M
North Highlands, CA  95660| pacbell!sactoh0!ianj |addicts left on this
(916) 344-5360            |                      |planet"

------------------------------

End of INFO-CPM Digest V89 Issue #150
*************************************
16-Jul-89 05:17:15-MDT,9185;000000000000
Return-Path: <INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL>
Date: Sun, 16 Jul 89 05:00:24 MDT
From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL
Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL
Subject: INFO-CPM Digest V89 #151
To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL

INFO-CPM Digest             Sun, 16 Jul 89       Volume 89 : Issue 151

Today's Topics:
                  AAARRRRGGGGHHHH! Ram chip hassles
                         CP/M 3.0 BBS wanted
                          More on LBR tools
         NEC 8500 TELCOM/MODEM7 Bugs; Kermit for this beast ?
                    Search for First in CP/M BDOS
                     WHAT ARE ????????.?Z? FILES?
----------------------------------------------------------------------

Date: 14 Jul 89 21:18:02 GMT
From: uop!nsayer@ucdavis.ucdavis.edu  (Nick Sayer)
Subject: AAARRRRGGGGHHHH! Ram chip hassles

Forgive the widespread post, but I am being driven quite insane by
this nagging problem.

I am in the process of upping the speed on a PCPI Applicard for a friend
of mine. I was able to do this successfully on my Applicard, with parts
in my toolbox, but now my toolbox is empty, and I need to buy some more
RAMs. 

I need 64Kx1 dynamic RAM chips, like 4164's. They need to be 100 ns.
They need to work with 7 bit (128 cycle) refresh. I have called 20
different people (really! I counted!). Every single person I talked
to apparently didn't know what I was talking about. As I talked to
them, I could see (even through the phone!) this strange blank look
come across their face.

Am I the only one in the world who understands the difference between
7 and 8 bit refresh??? Am I going to have to buy 256K RAM chips and
waste 192K of RAM to make this project go???

This project is for a Z-80. When the Z-80 refreshes, it puts a 7 bit number
out on the high 7 bits of the address bus and generates a special refresh
read signal. Some RAM chips will work just fine when only every second
row is refreshed. These are called 7 bit refresh cycle RAMs.

P-P-P-P-P-Please, eddie!!!!

------------------------------------------------------------------
Nick Sayer  |  nsayer@uop.edu  | ...ucbvax!ucdavis!uop!nsayer
Packet radio: N6QQQ @ WB6V | FredMail: NSAYER@MADERA%NORCAL
Disclaimer: The BBC would like to appologise for that announcement
Coming soon: quack!mrapple@uop.edu

------------------------------

Date: 12 Jul 89 00:24:00 GMT
From: jarvis.csri.toronto.edu!dptcdc!tmsoft!masnet!canremote!larry.moore@rutgers.edu  (LARRY MOORE)
Subject: CP/M 3.0 BBS wanted

>From: dorian@pawl.rpi.edu (Dorian S. Garson)
>Orga: Rensselaer Polytechnic Institute, Troy, NY
>
>
>I've just acquired a Morrow MD11 system (11 meg HD, CP/M 3.0, Z80-A -
>my first
>CP/M system), and I'd like to run a BBS on it.  Can anyone tell me
>where I
>might find public domain/shareware or very inexpensive BBS software
>for this
>beast?  If there's more than one to chose from, which one is the best?
>
>Thanks!
>
>-Dorian->
>
> |\  /\ ARPAnet: DORIAN@PAWL.RPI.EDU
> | \/ __       
> | /\  /  FoNet: (201) 254-0469
> |/  \/  SloNet: 6 Brandywine Drive, East Brunswick, NJ  08816
>---
> * Via MaSNet/HST96/HST144/V32 - UN CPM
> * Via Usenet Newsgroup comp.os.cpm
At last a question I can help with!  A friend and I ran a BBS on a
Morrow MD11 for a couple of years (Starling CP/M+ RCPM).  We used BYE510 
and Metal 1.31f (from the First Osborne Group) - we found Metal to be
OK, if lacking in security.  In three months I'll start up the BBS again 
using BYE510 and PBBS (Pencin/Cottrell).  Any BBS operation will require 
a clock, though - the Morrow lacks one and lacks the time:: routine in
the BIOS.  I'm using a Hayes Chronograph connected to the AUX port of
the Morrow.  There are better, easier and more elegant solutions but it
fitted the budget at the time and has been reliable.  Source for BYE510
is available from most RCPM's as are the PBBS45 source.
Hope this helps,  Larry Moore  CP/M conference chair Canada Remote
Systems.
---
 * Via ProDoor 3.0R 

------------------------------

Date: Fri, 14 Jul 89 10:08:24 PDT
From: Bridger Mitchell <bridger%rcc@rand.org>
Subject: More on LBR tools

> matthew@sunpix.UUCP...
> Third question (related to the first).  Any LU type program that handles 
> library management, and automatically squeezes/unsqueezes files?

The Z-System has an extensive set of library (LBR) tools.  VLU is a
full-screen shell that will display, and extract in uncrunched form,
a .?Z? file.  LTYPE will view in scrolling mode a crunched member of
a library.  Other tools, such as LGET and LPUT, can be used to extract
and insert members.

These tools, like the Z-System, continue to evolve with improved
features.  Recent versions of LPUT, LDIR, and CRUNCH maintain the
datestamps of files inserted and extracted as LBR members, when hosted
by a system running DateStamper.

JetFind, a fast string-search utility with grep features, will search
sQueezed and crunched (?Z?) ascii and WS files inside one or several
libraries.  Options allow extracting matching lines or the entire file.

Z-System tools are available on Z-Nodes and simtel20.  The latest
versions of the Z-System (NZ-COM for CP/M 2.2, Z3PLUS for CP/M Plus),
and also JetFind, are available from Sage Microsystems East and
Plu*Perfect Systems, and also selected Z-Nodes.

-- bridger mitchell

------------------------------

Date: Fri, 14 Jul 89 09:47:00 PDT
From: secrist@msdsws.enet.dec.com (Richard C. Secrist)
Subject: NEC 8500 TELCOM/MODEM7 Bugs; Kermit for this beast ?

	The NEC 8500 has a resident TELCOM program that does MODEM7 transfers.
	8-bit up/downloads using this software frequently fail after a few
	buffers and start NAKing the host.  I haven't figured this out entirely,
	but I do know it is sometimes related to baud rate, i.e. a file that
	NAKs out at 2400 bps might come down at 1200 or 300 bps.  Some files,
	like 8-bit document-mode Wordstar files uploaded to a host from the
	NEC, always seem to NAK-out after 16 (decimal) packets, at anywhere
	from 50 to 9600 bps.  Move a 7-bit text file either way with the
	same setup, host, and software on both ends, and it goes just fine.
	Has anybody riddled this out yet ?

	Better yet, anybody know about a kermit that runs on this beast ?

	rcs


------------------------------

Date: 7 Jul 89 20:25:15 GMT
From: voder!pyramid!prls!philabs!linus!nixbur!nixpbe!ugun13!josef@ucbvax.Berkeley.EDU
Subject: Search for First in CP/M BDOS

 > Does the "Search for First" function (#17) in the BDOS call
 > accept wildcards as FCB entries?  Should the caller convert
 > *'s to ???'s, or does the BDOS take care of that?

 > IF BDOS accepts '*' , does it accept it even if it is NOT the last character?

From "CP/M Operating System Manual" (Digital Research):

"An ASCII question mark (63 decimal, 3F hexadecimal) in any position
 from f1 [First character of file name] through ex [Extent byte] matches
 the corresponding field of any directory entry on the default or
 auto-selected disk drive
"
So, I think a '*' is not allowed and the caller should have expanded it
to '?'s.

Usually, the '*' is considered the last character of the respective part
(filename and/or extension), so
	a*.ext	is converted to	a???????.ext
		as are
	a*ything.ext
	a*******.ext

	a*.b*	is converted to a???????.b??

		Josef Moellers

	paper mail:			e-mail:
c/o Nixdorf Computer AG		USA:  uunet!linus!nixbur!mollers.pad
Abt. DX-SC 1			!USA: mcvax!unido!nixpbe!mollers.pad
Heinz-Nixdorf-Ring			Phone:
D-4790 Paderborn		(+49) 5251 104691
+-----------------------------------------------------------------------+
| "Many that live deserve death. And some that die deserve life.	|
|  Can You give it to them? Then do not be too eager to deal out	|
|  death in judgement"							|
|			Gandalf to Frodo in "The Fellowship of the Ring"|
+-----------------------------------------------------------------------+

------------------------------

Date: 14 Jul 89 02:25:00 GMT
From: jarvis.csri.toronto.edu!dptcdc!tmsoft!masnet!f1.n250.z1.fidonet.org!larry.moore@rutgers.edu  (larry moore)
Subject: WHAT ARE ????????.?Z? FILES?

A Z as the middle letter of the file extension indicates a LZV crunched file. Look for crnch24.{.arc,.ark,.lbr} for source and uncrunch.com -
ARKP04 is the latest version of a SEA arcfile creator that runs under CP/M - UNARC16 is the latest version of a SEA arc member extracter/list.
Latest project is to have an UNZIP that runs under CP/M which extracts and list directory of a 'ZIP' archive - saw a note predicting within two months it'll be ready for release.  A couple of us in Toronto are thinking of writing a 'zip' archive creation program that would run under CP/M (it's a slow hot summer and we've gotta do SOMETHING to keep the juices going  :-)   ).
Lots happening in a supposedly dead operating system.
--- D'Bridge 1.21
 * Origin: | Colour Dragon VI | D'Bridge/TBBS | (416)-823-4521| (1:250/1)

------------------------------

End of INFO-CPM Digest V89 Issue #151
*************************************
20-Jul-89 20:13:10-MDT,7507;000000000000
Return-Path: <INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL>
Date: Thu, 20 Jul 89 20:00:09 MDT
From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL
Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL
Subject: INFO-CPM Digest V89 #152
To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL

INFO-CPM Digest             Thu, 20 Jul 89       Volume 89 : Issue 152

Today's Topics:
                            7 bit refresh
                          Can't live with ED
                CP/M ANSI terminal emulators? (2 msgs)
                      Docs for HD64180? (2 msgs)
                    TVI806, Getting Software, Etc.
----------------------------------------------------------------------

Date: Mon, 17 Jul 89 12:09 EST
From: "There are conceptual relations, but never the truth."
Subject: 7 bit refresh

Hello.

As far as I know, T.I. is the only company that (used to) manufacture
256-cycle refresh 64K DRAMS.  Most, if not all, of the Japanese
made 64K DRAMS, which seems to dominate the mail-order market these
days are definitely 7-bit (128-cycle) refresh.

Just get one, and let me know what the brand name is.  I can look it up
for you, or you can call your local sales office of the manufacturer.

Those mail-order people should AT LEAST know WHICH brand name they are
selling, if the do not know what the refresh cycle is!

     -John

------------------------------

Date: 19 Jul 89 23:46:43 GMT
From: hpl-opus!hpnmdla!hpsad!jon@hplabs.hp.com  (Jon Aldrich)
Subject: Can't live with ED

I,m lookong for a text editor that will run under CPM-68K.  All I have
available currently is ED.  I'm in a CS course and am writing some assembly
code assignments.  I may just be spoiled, but surely there has got to be a
better editor out there some where.

------------------------------

Date: 20 Jul 89 06:50:25 GMT
From: pacific.mps.ohio-state.edu!ohstpy!jones@tut.cis.ohio-state.edu  (Bob Jones [VAX-Man] Home: (614)447-0214)
Subject: CP/M ANSI terminal emulators?

  Does anyone know of software available to emulate a vt100 [or other ANSI
terminal] on a 1982 Kapro running under cp/m? I don't know that much about
this type of computer except that it has an 8080 processor. We have software
now that emulates an ADM3A termial. Thank you.

Bob Jones  VAX/VMS-Man  ********** I think I forgot my towel *************

------------------------------

Date: 20 Jul 89 20:00:35 GMT
From: oliveb!mipos3!pcocd2!jmasters@apple.com  (Justin Masters )
Subject: CP/M ANSI terminal emulators?

In article <2948@ohstpy.mps.ohio-state.edu> JONES@ohstpy.mps.ohio-state.edu (Bob Jones [VAX-Man] Home: (614)447-0214) writes:
+
+  Does anyone know of software available to emulate a vt100 [or other ANSI
+terminal] on a 1982 Kapro running under cp/m? I don't know that much about
+this type of computer except that it has an 8080 processor. We have software
+now that emulates an ADM3A termial. Thank you.
+
+Bob Jones  VAX/VMS-Man  ********** I think I forgot my towel *************

Please let me know as well.  I have a Radio Shack Model 4 w/CP/M 2.2 on a
Z-80.  thanks in advance.

Justin.


------------------------------------------------------------------------------
"This is the United States calling.
 Are we reaching you?" - Pink Floyd  Justin Masters - jmasters@pcocd2.intel.com
-----------------------------------------------------------------------------

------------------------------

Date: 13 Jul 89 10:34:20 GMT
From: astroatc!nicmad!madnix!zaphod@speedy.wisc.edu  (Ron Bean)
Subject: Docs for HD64180?

   Anyone know a good way to get a databook or programmer's
manual for the HD64180? And is the Z280 upward compatible with it?
 
==================
zaphod@madnix.UUCP  (Ron Bean)
{harvard|rutgers|ucbvax}!uwvax!astroatc!nicmad!madnix!zaphod
                           {decvax|att}!

------------------------------

Date: 17 Jul 89 23:51:23 GMT
From: morris@jade.Berkeley.EDU  (Mike Morris)
Subject: Docs for HD64180?

In article <707@madnix.UUCP> zaphod@madnix.UUCP (Ron Bean) writes:
>
>   Anyone know a good way to get a databook or programmer's
>manual for the HD64180? And is the Z280 upward compatible with it?
> 
I got my '180 books from Hitachi (there were two) and my '280 books from
Zilog.  I was working for TRW at the time I asked for them, and wasn't
given any static about paying for them.  Note the '180 has bastard pin
spacing in the DIP package version, sockets are hard to come by.

Any distributor can give you the phone number of the local sales office.

US Snail:  Mike Morris                    UUCP: Morris@Jade.JPL.NASA.gov 
           P.O. Box 1130                  Also: WA6ILQ
           Arcadia, Ca. 91006-1130
#Include disclaimer.standard     | The opinions above probably do not even

------------------------------

Date: 18 Jul 89 23:39:17 GMT
From: armadillo.cis.ohio-state.edu!mowgli@tut.cis.ohio-state.edu  (Mowgli Assor)
Subject: TVI806, Getting Software, Etc.

Well, I just recently started playing with my Televideo 806 again, and realized
I didn't have *ANYTHING* useful. Even the copy of ASM I have seems to do wierd
things with seemingly legal (to me 9-) lines. It is, unfortunately, the 8080
version of ASM, & I need to find a whole *BUNCH* of Z-80 tools for the TVI. I
would appreciate anyone pointing me to where to get stuff.

In addition, I have a few specific questions:

1) I also have an IBM PC/XT - I remember there was a program for this which
   would convert just about any CP/M format to another, or between MS-DOS & any
   of the CP/M formats. Could someone please offer to mail me a copy, if you
   have it handy, or tell me where to get it?

2) C compilers - whose are they, how well do they work, how much do they cost?
   I've dealt with C before (on the PC), & since UZI is written in C source
   I'd like to look into C stuff on the TVI. I'm also interested in UZI, since
   my first project would probably be to write a decent Csh-like (as close as I
   could get it 9-) shell for my beasty.

3) Anyone else got a TVI-806 on the net? It's not exactly a common machine,
   I'll grant you. Kind of cute, though. Wish I could figure out how to get at
   the 6 RS-422 ports on the back of the machine - they seem to be made for use
   with Televideo's multi-user OS, which I've heard was 'cute' in the ultimate
   sense of the word (9-).

4) Does anyone have any assembly source I could grab for dealing properly with
   the serial ports, up to about 9600 or thereabouts?

5) I believe a bunch of people mentioned an archive sitting around, how do I
   get to it? In addition, are there any FTP sites with CP/M stuff?

As to exactly what I'm using, it's a Televideo 806, 60K, running CP/M 2.2 (I'd
love to get CP/M 3.0, but can it use the BIOS from 2.2? I doubt it). It's got a
20 Meg (closer to 13 when formatted, etc.) fixed disk, with A: & B: being the
HD, & C: being the 5 1/4" floppy. Far as I know, it's got a Z-80A in it (Z-80
of some sort, at least). I'm using a Wyse terminal as the console.

					Thanx, <Mowgli>

PS. Sorry about the basic questions, but I just got here 8-)



-=-
Address: mowgli@puffer.cis.ohio-state.edu (Mowgli Assor in real life)
     Or: mowgli@cis.ohio-state.edu
The 2 precepts of Semi-Divinity:	(1) Mind Thine Own Business.
					(2) Don't Worry About It.

------------------------------

End of INFO-CPM Digest V89 Issue #152
*************************************
23-Jul-89 01:12:28-MDT,7261;000000000000
Return-Path: <INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL>
Date: Sun, 23 Jul 89 01:00:36 MDT
From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL
Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL
Subject: INFO-CPM Digest V89 #153
To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL

INFO-CPM Digest             Sun, 23 Jul 89       Volume 89 : Issue 153

Today's Topics:
                         6502 cross-assembler
                           CP/M-68k editors
                    CP/M ANSI terminal emulators?
                          Docs for HD64180?
                       INFO-CPM Digest V89 #152
               Need for Epson Disk conversion software
                          ramdisk under cpm
----------------------------------------------------------------------

Date: 22 Jul 89 05:26:38 GMT
From: pacbell!sactoh0!ianj@ames.arc.nasa.gov  (Ian R. Justman)
Subject: 6502 cross-assembler

Does someone have a PD 6502 cross-assembler for CP/M?  If so, could
someone please mail me a copy?  Thanks in advance.
-- 
Home:   Ian Justman       |UUCP:                 |"One of the few
6612 Whitsett Drive       |                      |die-hard CP/M
North Highlands, CA  95660| pacbell!sactoh0!ianj |addicts left on this
(916) 344-5360            |                      |planet"

------------------------------

Date: Sat, 22 Jul 89 21:01:24 -0500
From: mknox@emx.utexas.edu (Margaret H. Knox)
Subject: CP/M-68k editors

The question was raised about alternate CP/M-68K editors.  Jon, It depends
on what system you are running (I mean the HOST hardware).  There are
several alternative editors.  

One, if you have the CPU speed, is to use one of the CP/M-80 emulators
and run any of the traditional CP/M full screen editors (WordStar, 
VEDIT, etc.).  

Two, I believe there is a PD full-screen editor on SIMTEL-20 for the
CP/M-68K system.

Three, MINCE (MINCE Is Not Complete Emacs) is available for CP/M-68K.
I think TriSoft may still have a copy or two on the shelves.

Four, there is also a visual editor from ERG for CP/M-68K, but I
don't recommend it.  The evaluation copy TriSoft received certainly
had a lot of bugs.

Five, pick up a copy of some good editor in source code for the
Atari ST-520.  It should be easy to 'port it.

Let me know if I can help.

					

------------------------------

Date: 22 Jul 89 02:31:22 GMT
From: pacbell!sactoh0!ianj@ames.arc.nasa.gov  (Ian R. Justman)
Subject: CP/M ANSI terminal emulators?

In article <2948@ohstpy.mps.ohio-state.edu>, JONES@ohstpy.mps.ohio-state.edu (Bob Jones [VAX-Man] Home: (614)447-0214) writes:
> 
>   Does anyone know of software available to emulate a vt100 [or other ANSI
> terminal] on a 1982 Kapro running under cp/m? I don't know that much about
> this type of computer except that it has an 8080 processor. We have software
> now that emulates an ADM3A termial. Thank you.
> 
> Bob Jones  VAX/VMS-Man  ********** I think I forgot my towel *************

I don't think that the Kaypros ever had 8080's in them.  However,
to answer your question, I have been using a program called QTERM
which I have found to be a neat little program in that it not only
offers VT100 emulation, it offers a variety of protocols, like
Xmodem in almost every of its incarnations, including Modem-7
batch.  It also supports Ymodem.  The one thing that ought to make
it a boon with calling Unix systems is that it has the Kermit
transfer protocol.  I'll see if I can mail you a copy (configured
to work on the Kaypro).
-- 
Home:   Ian Justman       |UUCP:                 |"One of the few
6612 Whitsett Drive       |                      |die-hard CP/M
North Highlands, CA  95660| pacbell!sactoh0!ianj |addicts left on this
(916) 344-5360            |                      |planet"

------------------------------

Date: 19 Jul 89 02:38:00 GMT
From: jarvis.csri.toronto.edu!dptcdc!tmsoft!masnet!canremote!larry.moore@rutgers.edu  (LARRY MOORE)
Subject: Docs for HD64180?

>   Anyone know a good way to get a databook or programmer's
>manual for the HD64180? And is the Z280 upward compatible with it?
Inquire at "Hitachi America, Ltd., Semiconductor and IC Sales and
Service Division, (Literature Fulfillment Center), PO Box 1137, Glenview 
Illinois 60025". SASE will probably get faster response but reasonably
fast in any event.
---
 * Via ProDoor 3.01R 

------------------------------

Date: 21 Jul 89 13:50:06 EDT (Friday)
From: kushall.Henr@Xerox.COM
Subject: INFO-CPM Digest V89 #152

Subject: 7 bit refresh

RE:

>I need 64Kx1 dynamic RAM chips, like 4164's. They need to be 100 ns.
They need to work with 7 bit (128 cycle) refresh. I have called 20
different people (really! I counted!). Every single person I talked
to apparently didn't know what I was talking about. As I talked to
them, I could see (even through the phone!) this strange blank look
come across their face.

Am I the only one in the world who understands the difference between
7 and 8 bit refresh??? Am I going to have to buy 256K RAM chips and
waste 192K of RAM to make this project go???


Well I was able to locate data for 4 mfg of 64K DRAM and all but Toshiba
were 8 bit refresh. Note that ALL the data sheets for 256K DRAMS list them
as 256 refresh cycles/4 ms (A0-A7) including Toshiba. * bit refresh seems
to be the industry standard for 64K and 256K DRAMs.

The following info is from the respective mfg data sheets:

Toshiba: TMM41164P-2  128 refresh cycles/2ms(A0-A6) but only 120 ns

NEC: uPD41464-10 256 refresh cycles/4 ms (A0-A7) 100 ns

Hitachi: HM50465P,CP Series 256 refresh cycles/4 ms

TI: No longer lists 64K DRAM but the old(86) data sheets lists the TMS4164
as 256 refresh cycles/4 ms (A0-A7) 

Ed Kushall	




------------------------------

Date: 22 Jul 89 19:23:50 GMT
From: att!cbnewsd!pnb@ucbvax.Berkeley.EDU  (paul.n.burgess)
Subject: Need for Epson Disk conversion software

I currently have an Epson Geneva (PX-8) laptop computer together 
with a PF-10 portable disk drive. As you may know, Epson decided 
to have a non-standard format for their floppy disk layout for 
this system. As a result, while there is a good bit of CP/M 
software around, any of it distributed on disks for more popular 
CP/M machines won't work when trying to read it from other 
formatted disks. Does anyone know of any software that could be 
used to read such a disk, bringing the material from the original 
disk into RAM disk, and rewriting it back on to another disk in 
the Epson format? Any suggestions would be appreciated. Thanks in 
advance.

------------------------------

Date: 21 Jul 89 21:29:42 GMT
From: gem.mps.ohio-state.edu!ginosko!ctrsol!uakari!indri!caesar!blake!ogccse!littlei!flight!george@tut.cis.ohio-state.edu  (George Rachor x65135)
Subject: ramdisk under cpm

Is there such a thing as a Ram disk driver for the Apple ][ plus under
cpm?  I have an apple memory expansion card located in slot 2.

When I boot up prodos this board is found to be a ramdisk called "RAM2".

I currently have CPM 2.2.  Would such a thing be public domain?

------------------------------

End of INFO-CPM Digest V89 Issue #153
*************************************
24-Jul-89 05:05:26-MDT,8325;000000000000
Return-Path: <INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL>
Date: Mon, 24 Jul 89 05:00:34 MDT
From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL
Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL
Subject: INFO-CPM Digest V89 #154
To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL

INFO-CPM Digest             Mon, 24 Jul 89       Volume 89 : Issue 154

Today's Topics:
                          CP/M ANSI TERMINA
                      CP/M ANSI terminal emulat
                             CP/M on C128
                          ramdisk under cpm
                            TVI806, GETTIN
                    Uh-oh....  (was 7-bit Refresh)
                      UZI (for mlewis at unocss)
----------------------------------------------------------------------

Date: 23 Jul 89 03:29:00 GMT
From: mailrus!jarvis.csri.toronto.edu!dptcdc!tmsoft!masnet!f1.n250.z1.fidonet.org!larry.moore@purdue.edu  (larry moore)
Subject: CP/M ANSI TERMINA

(David Goodenough) harvard!cfisun!lakart!pallio!dg wrote a VT100 emulator
that runs under CP/M - the QTERM41.LBR has an overlay for the Kaypro, prewritten with some assembly required.  I've used it, with my Morrow MD, calling a Xenix 6.0 system ( termcap term = vt100) and it worked. Didn't use emacs, just vi
though, so it wasn't a rigorous test.
--- D'Bridge 1.21
 * Origin: | Colour Dragon VI | D'Bridge/TBBS | (416)-823-4521| (1:250/1)

------------------------------

Date: 22 Jul 89 12:45:00 GMT
From: mailrus!jarvis.csri.toronto.edu!dptcdc!tmsoft!masnet!canremote!larry.moore@purdue.edu  (LARRY MOORE)
Subject: CP/M ANSI terminal emulat

You should be able to locate a file called qterm40 which allows VT100
emulation.
---
 * Via ProDoor 3.01R 

------------------------------

Date: 24 Jul 89 02:50:22 GMT
From: sekora-jay@CS.YALE.EDU  (Jay Sekora)
Subject: CP/M on C128

(1) I have lost the information on how to get the additional disk
of "standard" CP/M utilities for the C128 (ED, the assemblers,
etc.).  There was a card to mail in that came with my C128D, but
I've lost it.  I got my machine a couple of years ago, and I *think*
I registered my copy of CP/M.

(2) Does anyone know where I could get (public domain or fairly
cheap):
	* a decent CP/M text editor
	* a Z-80 assembler (I understand the one that
	  comes with CP/M uses 8080 mnemonics--I like
	  my LDIR)
	* a C compiler (I understand there's a good
	  PD C compiler that comes with source)

I read comp.sys.cbm fairly often, so you can reply either by posting
there or by email.  I *don't* read comp.os.cpm very often, so email
is preferable to posting there.

Thanks,
-j.




____________________________________________________________________________
DISCLAIMER:  Everything I say is the|			sekora-jay@yale.UUCP
absolute and utter truth, but Yale  |		  {backbone}!yale!sekora-jay
doesn't necessarily know this.	    |		       sekjaya@yalevm.BITNET
				    | 6455 Yale Station, New Haven, CT 06520

------------------------------

Date: 23 Jul 89 09:58:10 GMT
From: amdahl!pacbell!sactoh0!ianj@ames.arc.nasa.gov  (Ian R. Justman)
Subject: ramdisk under cpm

In article <188@flight.UUCP>, george@flight.UUCP (George Rachor x65135) writes:
> 
> Is there such a thing as a Ram disk driver for the Apple ][ plus under
> cpm?  I have an apple memory expansion card located in slot 2.
> 
> When I boot up prodos this board is found to be a ramdisk called "RAM2".
> 
> I currently have CPM 2.2.  Would such a thing be public domain?

I suggest you give Applied Engineering's CP/AM a whizz.  It has a
program called "RAMDRIVE" which works on //e computers equipped
with ramcards like AE's RamWorks (it won't work with RamFactor or
with the Apple card that you have.  BTW, it ought to be in a slot
other than 2 because that's the standard slot for communications
devices (eg modems, etc.) unless you have a reason for locating it
in slot 2).  However, there is a program with it called "PC" which
will check to see if you have Protocol Cards (I think that is what
it stands for...) like the Disk 3.5 controller (a Central Point
Software Universal Disk Controller will work fine and I strongly
suggest it), a RamFactor, or other cards.  I think it might
recognize your card.

However, if you're using Microsoft's CP/M, as far as I know, you're
stuck.  I haven't seen ramdrive software that will work with
Apple expanded ram cards which are in the public domain.
-- 
Home:   Ian Justman       |UUCP:                 |"One of the few
6612 Whitsett Drive       |                      |die-hard CP/M
North Highlands, CA  95660| pacbell!sactoh0!ianj |addicts left on this
(916) 344-5360            |                      |planet"

------------------------------

Date: 21 Jul 89 12:27:00 GMT
From: mnetor!tmsoft!masnet!f1.n250.z1.fidonet.org!larry.moore@uunet.uu.net  (larry moore)
Subject: TVI806, GETTIN

C compilers - since you have an IBM PC I'd suggest getting the HiTech C package from Workman & Associates ... a Z80 CP/M ANSI C compiler that runs very well under a MSDOS CP/M emulator (or with a V20).  Produces good fast CP/M .com files ... you might be able to run it directly under CP/M 2.2 but it likes a LARGE TPA and doesn't seem to like CP/M+ (Morrow HD), and ran poorly on a borrowed Xerox 820-II CP/M 2.2. Might be OK on a Telewidget?^
For use directly under CP/M, nothing I've found beats Manx Aztec C - overlays, roms, DRI or MicroSoft compatable assembly output; 
runs stabily.  Missing a few of the ANSI extensions and also the bit field but otherwise quite fine.
Pricey though.
Hope this helps.
--- D'Bridge 1.21
 * Origin: | Colour Dragon VI | D'Bridge/TBBS | (416)-823-4521| (1:250/1)

------------------------------

Date: Sun, 23 Jul 89 12:32 EST
From: "Architecturally, Z-80 can be made to run at 100MHz!"
Subject: Uh-oh....  (was 7-bit Refresh)

Well, I am a currently enrolled student living in the college-provided
housing (a.k.a. Dorms).  It so happened that I had to move almost every
semester and go home to Korea over the summer, which means that having
databooks that fill a 4-by-six space was a drag, which lead me to "weed
out" duplicate and "obsolete" copies.  I knew I shouldn't have, but
the "friends (like the recent popular music proclaims)" forced me to.

I say, never trust your "friends!"  I just realized that most companies have
decided to cut back (or discontinue) on their 64-k DRAM products!  The only
databooks that list them are the old ones that I was about to have replaced!
Which means, while the companies ARE still producing 64K DRAMS for
"maintenance" purposes "ONLY," and those parts are available in the market,
I don't have any data on them!

256-K DRAM's (even 64K by 4) are ALMOST WITHOUT EXCEPTION 256 cycle refresh,
which means that they can NOT be used (with ease) with true Z80 (*&D#%ing,
eh!).  MY SUGGESTION, at this point, would be to use 32K by 8 STATIC RAMS
(Hey, don't gasp...)!!!  They are only $15 each, at most, these days int the
mail-order world, and are getting faster by the day.  Pseudo-static RAMS
are not a bad idea, either.

For your information, Hyundai made 256-cycle DRAMS, and Motorola and Oki
made 128-cycle DRAMS.  So did Mostek, but they merged with SGS-Thompson,
and no DRAMS in their databook!  All 128-cyclers are 2mS refresh.

                         John Shin

P.S.  Like I said, it would be also a good idea to get the brand of the
64K parts from the shop and ask the manufacturer, although telling a
256K chip that it is a 64K ship isn't such a bad idea, either.

------------------------------

Date: 22 Jul 89 20:20:22 GMT
From: mcvax!unido!cosmo!fifi%cosmo.UUCP@uunet.uu.net  (A.F.Zinser)
Subject: UZI (for mlewis at unocss)

SORRY FOR MISUSING THIS GROUP - IT'S SHORT, BUT IMPORTANT!
----------------------------------------------------------
hi marc, I've some trouble with the mailer at your system.
it sometimes (!!!) refuses to accept my mails to you - but
I get yours. do you know another route to your system
(*not* that one I used first time).      fifi@cosmo.uucp
----------------------------------------------------------
THANKS FOR YOUR COMPREHENSION

------------------------------

End of INFO-CPM Digest V89 Issue #154
*************************************
26-Jul-89 01:14:05-MDT,8717;000000000000
Return-Path: <INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL>
Date: Wed, 26 Jul 89 01:00:15 MDT
From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL
Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL
Subject: INFO-CPM Digest V89 #155
To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL

INFO-CPM Digest             Wed, 26 Jul 89       Volume 89 : Issue 155

Today's Topics:
                      CP/M yacc in comp.os.minix
              New CCP features - summary of suggestions
                      testing -- please ignore.
                            ZSM and ZPATCH
----------------------------------------------------------------------

Date: 24 Jul 89 10:34:34 GMT
From: mcvax!kth!draken!tut!santra!mjolner!tnvsu1.tele.nokia.fi!eru@uunet.uu.net
Subject: CP/M yacc in comp.os.minix

Readers of this group might be interested to hear that a yacc-clone
that was originally written on a CP/M system was recently posted to
comp.os.minix by its author David Clunie (U5569462@ucsvc.unimelb.edu.au).

Erkki Ruohtula
eru@tele.nokia.fi

------------------------------

Date: 22 Jul 89 01:05:59 GMT
From: ima!cfisun!lakart!dg@decvax.dec.com  (David Goodenough)
Subject: New CCP features - summary of suggestions

OK, the polls are in for what you think I should add to Z80CCP. These are
the suggestions:

Ken Yap <lakart!xait!garp!rochester!ken>
Paul Sander <ima!decvax!Atherton.COM!paul>
Jon Peticolas <ima!decvax!decwrl!ucbvax!cbnewsh.att.com!jlp>

These gentlemen all suggested history, something like the C-shell !!
and the likes. Well, with some _REAL_ dirty trickery, and the assumption
that you have a _VANILLA_ DRI V2.2 BDOS, no Z-system, or anything else,
it's in. It works like this: Use ZSID / DDT / Whatever to create a file
of at least 17 blocks, and fill them all with zeros: call it

!CCP.HIS

and put it on A0:

Now, whenever you execute a command, it's saved. To access them, you
enter ^K (that's control K) in response to the A0> prompt, hit return,
and you get the previous one. Hitting ^K ^M again gets you another
command. As it happens, I have 16 programmable function keys on my
machine, so I keep one loaded with < ^X ^K ^M >, where the ^X clears
the command line, ^K is the "up" character, and ^M sends it it. So
repeated hits on this function key step me backwards through my
history. If I were a good kid I'd add ^L or something to go forwards
as well.

Once you have a previous command up, it's just like you typed it in,
but didn't hit return yet - you can then use backspace etc. to edit
it, when you're happy, hit return and away it goes.


Tom Bopp <lakart!xait!uhccux.uhcc.Hawaii.Edu!tbopp>

Suggested the following:

>1. A smarter DIR command, to include file size and space available.
>
>   b3>DIR *5:afn    should work
>   b3>DIR A*:afn    should work
>   b3>DIR **:afn    should work like whereis

OK, I didn't do either of these (i.e. wildcarding drives & users) or
adding filesize / free space since I have utilities to do these,
HOWEVER .....

>2. A command TYPEB (or BTYP, or ???) to produce a DDT-like dump of a
>   binary file.

I did this, and called it DUMP (what else :-) ). But, it wouldn't fit in
the CCP, so I dreamed up the following, which will allow any self
respecting hacker to add anything they like to the CCP.

I created a second "section" of the CCP - resident in A0:!CCP.SYS, that
is called if the CCP is trying to match a command it can't find in it's
own table. It's not always present, it gets loaded when you enter '!' as
a command _OR_ start a command with '!', so:

A0>!DUMP B7:FOO.BAR

will load the extra code, and then do the dump command resident in the
extra code. I've set the extra code to live at 0x8000, and with my CCP
starting at 0xd400, I have up to 20K to play with - lots of room :-)

THE POINT OF THIS is that you can put whatever you want into this
extra addon code, so the customization possibilities are limited only
by your imagination.

>3. A command FEED which would send a FF to the printer.

Trivial, it's in the main CCP code.

>4. A command MENU C:  which would display a list of all .COM files on
>   drive C:, with menu numbers; typing a number would run the program.

Would take a bit of doing - if you want it, throw it in !CCP - you will
find that !CCP is going to become the place where I suggest doing
everything.

>5. A toggle (^F ?) to redirect printer output to a file.  To capture screen
>   output in a file you go ^P^F.  Need to think about filename (PRINTER.LOG
>   comes to mind), and how to avoid bombs if disk full, etc.  How to close
>   file, etc.

Almost impossible from the CCP level - this takes work messing with the
BDOS, with a TSR. Oh well, I'm 4 and 2 so far .....


Mike Morris <morris@jade.Jpl.Nasa.Gov>

Suggested:

> I've always hated ERA, how about adding DEL to the command table, pointing
> to the ERA code?  If you don't like that, a conditional assembly?

Trivial to do - it's in on a conditional assembly, just like I call TYPE
CAT, so that's on a C.A. as well.

> My BIOS will handle several disk formats transparently - the DPB is in
> Track 1 sector 0 bytes 0-31.  Bytes 32-64 have a ID string in ascii.
> My hacked CCP has a DISK command that displays stuff like the following:
> 
> A0: >DISK
> 
> A: 1900k RAMdsk - 100k LST: spool
> B:  966k D Sided D Density 50 SPT
> C:  466k S Sided D Density 50 SPT
> D:  241k S Sided S Density 26 SPT
> E: 8192k Hard Disk partition 0
> F: 8192k Hard Disk partition 1           

!CCP.SYS again - you've got 20K to work in. ..... No, seriously, that's
why I invented the !CCP.SYS approach - it allows an easy hook for doing
custom mods.

> How about IN, OUT, PEEK, POKE ?

Same again .....

> How about LOAD <COMfilename> and RUN ?

This gets interesting. The only reason to do these is if you're going to
take PEEK & POKE to them, and if you do that, they'd better be 32K or smaller.
I suppose you could move the load address for !CCP.SYS up to (say) 0xb000
or somewhere. Note that RUN can be achieved without any code added to the
CCP by creating a file RUN.COM on A0:, size zero bytes.

> I wish I had the space to implement the multiple byte OUT format.

Now you do :-)

> BTW, on mine I sacrificed
> the SAVE command to get more space.  I rarely use it, and when I need it
> I can boot up from a regular CP/M floppy.  If I had kept it I would have
> modified it to take memory in K as a decimal parameter, or H as the highest
> address in Hex to save.  No more of these "memory paragraphs" B.S. !

Again, I left the memory paragraph SAVE in the regular CCP, but to add
another command to !CCP.SYS - well there's still lots of space to play
with.

Now, for one of my own ideas - COPY needs to go in !CCP.SYS, it would be
a PIP type thing, but I'd have it a bit more flexible:

COPY A3:FILE.XYZ = B7:*.Z

would concatenate all .Z files on B7: and put them in A3:FILE.XYZ, have
it reset before each operation, no more BDOS ERROR on C: R/O


And finally,

Mitchell Wyle <xait!harvard!cs.utexas.edu!uunet!mcvax!inf.ethz.ch!wyle>

Suggested:

> What about a couple of programmable functions (from Bourne's shell):
>
> A0> for FILE in `ls *.TXT` ; do
> >     TYPE $FILE
> >   done

Again, almost impossible to do from the CCP. However, for those that
are interested, I have a utility to do this sort of thing: I call it
FILSUB. A typical command line might be:

A0>FILSUB [B:*.Z] `EM *.*`

which gets expanded to a $$$.SUB file that takes EM (my editor) to each
.Z file on B:. FILSUB has several other features, but this is the one
that was being asked for, and knowing how I did it, I doubt I could
fit it in the CCP, any more that SUBMIT is part of the CCP.


Again, this is not a closed issue, any other neat ideas will be welcome.
-- 
	dg@lakart.UUCP - David Goodenough		+---+
						IHS	| +-+-+
	....... !harvard!xait!lakart!dg			+-+-+ |
AKA:	dg%lakart.uucp@xait.xerox.com		  	  +---+

------------------------------

Date: 24 Jul 89 18:20:57 GMT
From: cs.utexas.edu!usc!orion.cf.uci.edu!uci-ics!cwi!tran@tut.cis.ohio-state.edu  (Hieu Tran)
Subject: testing -- please ignore.

This is a test.

------------------------------

Date: 25 Jul 89 18:26:49 GMT
From: janus.berkeley.edu!senderow@ucbvax.Berkeley.EDU  (Dan Senderowicz)
Subject: ZSM and ZPATCH

Does anybody know where can I find ZSM and ZPATCH? These programs are used
to assemble and patch QTERM. I understand that they can be find at simtel20,
but I was not able to. Thanks,

Dan.

------------------------------

End of INFO-CPM Digest V89 Issue #155
*************************************
28-Jul-89 20:06:32-MDT,9106;000000000000
Return-Path: <INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL>
Date: Fri, 28 Jul 89 20:00:16 MDT
From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL
Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL
Subject: INFO-CPM Digest V89 #156
To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL

INFO-CPM Digest             Fri, 28 Jul 89       Volume 89 : Issue 156

Today's Topics:
                            C for CP/M-86
                     Epson PX-8 Disk conversions
                        getting kermit to work
                        Kaypro 10 serial port
                   taking care of bad disk sectors
                    Uh-oh....  (was 7-bit Refresh)
----------------------------------------------------------------------

Date: 27 Jul 89 16:48:17 GMT
From: mcvax!unido!iraun1!iravcl!s_jaenicke@uunet.uu.net
Subject: C for CP/M-86

I have a question about CP/M-86 (and Concurrent CP/M-86):

Does anybody know about a C-Compiler (Better: C++) for CP/M-86 that also runs
under Concurrent CP/M-86?
I have only a Version 1.0 of Digital Research C (1981). Very slow, not
Standard, 8087-Lib doesn't work, only the small-memory-model runs under CCP/M.
Has anybody heard about a C-Compiler that has a 8087-Library, is able to link
Assembler-Code or other languages?
And: Where can I buy this Compiler?

Thanks for a response.
Frosch, Karlsruhe.

------------------------------

Date: Fri, 28 Jul 89 20:13:01 EDT
From: John C Klensin <KLENSIN@INFOODS.MIT.EDU>
Subject: Epson PX-8 Disk conversions

Paul N Burgess wrote looking for a way to get disk conversions from the 
Epson PX-8 / PF-10 disk drive format.

The most recent version of MSDOS Media Master supports the PX-8's disk
format, if you can find an IBM PC clone with a 3 1/2 inch drive.  The
720 Kb models are fine; I don't recall any problems with the 1.4Mb ones,
but am not sure we have tried it.   For probably-obvious reasons, Media 
Master is pretty sensitive to having a 100% compatible controller out 
there, and does not get along with "installable" device drivers, such as 
would come with after-the-fact controllers, very well at all.  Most of 
our conversions have been done with a PS-2 Mod 30.

I don't have any idea whether the CP/M-based versions of MediaMaster now 
support the PX-8.  You would need a supported machine with DSDD 3 1/2
inch disk drives, which does not impress me as likely. 

For many purposes like this, we have adopted the alternate solution of 
finding another CP/M machine that can read appropriate disks, then 
running the data down a wire into the Epson using Xmodem, Kermit, or 
whatever.  Then one lets the Epson write its own disks.

You will find that Epson's designers were quite clever about that 
machine.  From reading the drawings, I suspect that they intended to 
permit pulling the 80C80 and replacing it with a 16-bit processor at 
some stage.  But other bits of cleverness like this make it incompatible 
with almost anything you can think of once one gets down to the hardware 
level.  I gather that this has been a generic problem with Epson
computers. 

MediaMaster comes from Intersecting Concepts.  Last address I have handy 
is 68 Long Court, Suite 1B, Long Beach, CA 91360.

No affiliation with companies or endorsement of products mentioned 
above, but we have found them to work.
   John Klensin   Klensin@INFOODS.MIT.EDU


------------------------------

Date: 26 Jul 89 20:42:14 GMT
From: mailrus!ulowell!m2c!wpi!ggray@ames.arc.nasa.gov  (Gary Gray)
Subject: getting kermit to work

I have an Osborne Executive computer that I would like to use as a spare 
terminal. I would like to use kermit, since it is free and it is on all
of my other machines.  I have tried to get it running by transfering the .hex
files from Columbia to the Osborne via my IBM, using a program called media
master to get the Osborne to read the IBM disks.  I got the program called 
mload running (apparently) from the hex file and used it to assemble the 
two pieces of Kermit (the system independent and the system specific files)
Unfortunatly, Kermit hangs when I attempt to connect (enter terminal mode), but
operates normally in other respects.  Does anyone have any idea what I might 
be doing wrong?  Is there some special configuring I need to do?  

Failing that, does anyone know of an easier way to get Kermit running on
my machine?  

Thanks.

------------------------------

Date: 26 Jul 89 11:03:43 GMT
From: garfield!leif!andrew@uunet.uu.net
Subject: Kaypro 10 serial port

Help please!

I thought that perchance this was a good newsgroup to ask for help in.  I'm 
sitting here _trying_ to get my trusty Kaypro 10 to talk to it's serial 
interface.  The Superterm program seems to have no problem, (2400 8N1), but 
whenever I try to access the port from pip, basic (m,c,s,&o), or bdos calls, 
the machine sits there and hangs.  I even tried going directly to the Z80 SIO 
chip... with null results.....

Any suggestions?

Thanks,
-Andrew.


Bitnet:  andrew@kean.mun.ca

------------------------------

Date: 26 Jul 89 19:05:50 GMT
From: beech@g.ms.uky.edu  (Wayne Beech)
Subject: taking care of bad disk sectors

Hello,

I seem to recall seeing a program named FINDBAD that verified a cpm disk and
placed any bad sectors in a file like BADSPOTS.BAD.  does anyone know of this
program or similiar programs that can be used for dealing with badspots and/or
verifying that a drive is working correctly?

thanks.
-- 
=============================================================================
UUCP  : !ukma!beech
BITNET: beech@ukma
DOMAIN: beech@ms.uky.edu

------------------------------

Date: 26 Jul 89 13:10:39 GMT
From: mcvax!hp4nl!phigate!nlgvax!geertj@uunet.uu.net  (Geert Jan de Groot)
Subject: Uh-oh....  (was 7-bit Refresh)

[In various articles, people proposed all kinds of solutions for the 
128-cycle Z80 refresh problem. I still had my answer to the original
writer lying around and thought it might be useful to others, so here
it goes:]

In article <398@uop.uop.EDU> he wrote:
>I need 64Kx1 dynamic RAM chips, like 4164's. They need to be 100 ns.
>They need to work with 7 bit (128 cycle) refresh. 

The most 64K DRAMs are 7 bit refresh. From memory, Hitachi, NEC, Fujitsu
are all good. Texas Instruments is not. 128 or 256 bit refresh is clearly
marked in  the databook. 90% of the 64K RAMs (usually those from 
The Land Of The Rising Yen) are OK.

If you still only get access to the remaining 10%, there is another
trick using some extra circuitry. Get an extra 4040, connect the clock
of the 4040 to RFSH of the Z80, and use Q7 as the extra refresh address
you were missing. Use a 74153 as multiplexer for the extra addr pin:


              ----------                 ----------
             |          |           +---|I0        |
             |          |           |   |          |
 Z80 RFSH ---|clk     Q7|-----------+---|I1       Q|--- new A7 4164's
             |          |               |          |
      GND ---|reset     |    Z80 A14 ---|I2        |
             |          |               |          |
             |          |    Z80 A15 ---|I3        |
             |          |               |          |
             |          |               |          |
             | HEF 4040 |   ADDR MUX ---|A0        |
              ----------                |          |
                            Z80 RFSH ---|A1        |
                                        |          |
                                        | 74LS153  |
                                         ---------- 

During R/W operation, A14/15 is fed to the RAM's, which you needed to
build anyway because the old 4116's didn't have A7. During refresh,
Q7 is fed to the RAMs. Because Q7 toggles each 128 refresh periods,
it refreshes all columns.

I hope this is clear enough. Good luck!

>Am I the only one in the world who understands the difference between
>7 and 8 bit refresh??? Am I going to have to buy 256K RAM chips and
>waste 192K of RAM to make this project go???

256K chips are even worse. They have 8/9 bit refresh, so you have 2
address bits to add. You can use Q8 of the 4040 and the other half
of the 74153 to do this if you like, and have 256K available
(with the multi-task, multi-user Z80 system I built with a group,
we even have 384K available, enough to support 6 CP/M user simultaniously.
How 384K is addressed with a Z80 is another story, available on request).

>Nick Sayer  |  nsayer@uop.edu  | ...ucbvax!ucdavis!uop!nsayer

--8<--nip-nip---------------------------------------------------------------

Geert Jan de Groot,			Email: geertj@nlgvax.pcg.philips.nl
Philips TDS-ICA,			       ..!mcvax!nlgvax!geertj
Innovation Centre Aachen,		Ham: PE1HZG
Weisshausstrasse,			"MS-DOS is just a bootstrap" - me
5100 Aachen, Germany.
phone: +49 241 6003 714			[Standard disclaimers apply]

------------------------------

End of INFO-CPM Digest V89 Issue #156
*************************************
30-Jul-89 10:09:07-MDT,9991;000000000000
Return-Path: <INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL>
Date: Sun, 30 Jul 89 10:00:12 MDT
From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL
Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL
Subject: INFO-CPM Digest V89 #157
To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL

INFO-CPM Digest             Sun, 30 Jul 89       Volume 89 : Issue 157

Today's Topics:
                          Hard drive utils?
                      ramdisk under cpm (3 msgs)
                       TeleVideo TPC 1 (2 msgs)
                                 Zork
----------------------------------------------------------------------

Date: 30 Jul 89 11:17:07 GMT
From: amdahl!pacbell!sactoh0!ianj@ames.arc.nasa.gov  (Ian R. Justman)
Subject: Hard drive utils?

I just got two S100 computers, one of which has a 10-megabyte hard
drive.  Does anyone have any suggestions as to what kind of
PD hard drive utilites I should get (aside from FIRE, based on
RESTORE and SAP (needed to run FIRE), but those suggestions are
welcome)?
-- 
Home:   Ian Justman       |UUCP:                 |"One of the few
6612 Whitsett Drive       |                      |die-hard CP/M
North Highlands, CA  95660| pacbell!sactoh0!ianj |addicts left on this
(916) 344-5360            |                      |planet"

------------------------------

Date: 26 Jul 89 14:13:14 GMT
From: astroatc!nicmad!madnix!rat@speedy.wisc.edu  (David Douthitt)
Subject: Ramdisk under CPM

Ian R. Justman (ianj@sactoh0) wrote:
(in reply to) George Rachor x65135 (george@flight.UUCP):
| |  
| |  Is there such a thing as a Ram disk driver for the Apple ][ plus under
| |  CPM?  I have an apple memory expansion card located in slot 2.
| |  
| |  When I boot up Prodos this board is found to be a ramdisk called "RAM2".
| |  
| |  I currently have CPM 2.2.  Would such a thing be public domain?
| 
| I suggest you give Applied Engineering's CP/AM a whizz.

Why?  It's only compatible with CP/AM which limits you to Apple CP/M owners.
For a considerably lower amount ($0!) you can get ZCPR 3.3 and remain
compatible with any other Z80 machine running ZCPR 3.3 (or CP/M 2.2 if you
limit yourself).

| It won't work with RamFactor or with the Apple card that you have.

| However, there is a program with it called "PC" which...
| I think ... might recognize your card.

Seems like a pretty lame reason to buy CP/AM.

| However, if you're using Microsoft's CP/M, as far as I know, you're
| stuck.  I haven't seen ramdrive software that will work with
| Apple expanded ram cards which are in the public domain.

There ARE other CP/M cards besides the slowpokes from AE and Microsoft.

The PCPI card has numerous drivers in the public domain (it has a standard
way of installing any appropriate driver that you choose).  There might
be one for an Apple memory card.

If you don't have an Applicard, perhaps its time you left 1MHz in the dust
and got an older card which still has yet to be beaten at 6MHz.

Applied Engineering, when you gonna wake up and smell the roses?  This card
is at LEAST 5 years older than the Z80 Plus and runs 6 times faster.

	[david]

-- 
!======= David Douthitt :::: Madison, WI =======!== The Stainless Steel Rat ==!
!  ArpaNet: madnix!rat@cs.wisc.edu              !                             !
!  UseNet: ...uwvax!astroatc!nicmad!madnix!rat  !  Mad Apple Forth:           !
!               {decvax!att}!                   !  The Madness starts here.   !

------------------------------

Date: 24 Jul 89 20:25:12 GMT
From: uci-ics!zardoz!tgate!ka3ovk!drilex!axiom!linus!nixbur!nixpbe!ugun13!josef@cs.ucla.edu
Subject: ramdisk under cpm

george@flight.UUCP writes:

 > /* ---------- "ramdisk under cpm" ---------- */
 >
 > Is there such a thing as a Ram disk driver for the Apple ][ plus under
 > cpm?  I have an apple memory expansion card located in slot 2.
 >
 > When I boot up prodos this board is found to be a ramdisk called "RAM2".
 >
 > I currently have CPM 2.2.  Would such a thing be public domain?

From my (limited) experience with CP/M I would say that You can't just
buy a "ramdisk driver".

What You need to do is to change Your machine's BIOS to allow the entries
	HOME, SELDSK, SETTRK, SETSEC, READ and WRITE
to recognize Your RAMdisk.

Depending on the (current) implementation, it would probably be
sufficient to modify HOME, READ and WRITE, as the other ones merely
update some memory locations with the desired values which are later
used by READ and WRITE (with respect to HOME, my CP/M Operating System
Manual says "The disk head of the currently selected disk (...) is
moved to the track 00 position", although You can "translate into a
call to SETTRK with a parameter of 0" which in turn "...seek the
selected track at this time or delay the seek until the next READ or
WRITE actually occurs").

You could probably call the RAMdisk disk E: (A:-D: being used for floppies).

		Josef Moellers

	paper mail:			e-mail:
c/o Nixdorf Computer AG		USA:  uunet!linus!nixbur!mollers.pad
Abt. DX-SC 1			!USA: mcvax!unido!nixpbe!mollers.pad
Heinz-Nixdorf-Ring			Phone:
D-4790 Paderborn		(+49) 5251 104691
+-----------------------------------------------------------------------+
| "Many that live deserve death. And some that die deserve life.	|
|  Can You give it to them? Then do not be too eager to deal out	|
|  death in judgement"							|
|			Gandalf to Frodo in "The Fellowship of the Ring"|
+-----------------------------------------------------------------------+

------------------------------

Date: 30 Jul 89 11:12:49 GMT
From: amdahl!pacbell!sactoh0!ianj@ames.arc.nasa.gov  (Ian R. Justman)
Subject: Ramdisk under CPM

In article <752@madnix.UUCP>, rat@madnix.UUCP (David Douthitt) writes:
> 
> There ARE other CP/M cards besides the slowpokes from AE and Microsoft.
> 
> The PCPI card has numerous drivers in the public domain (it has a standard
> way of installing any appropriate driver that you choose).  There might
> be one for an Apple memory card.
> 
> If you don't have an Applicard, perhaps its time you left 1MHz in the dust
> and got an older card which still has yet to be beaten at 6MHz.
> 
> Applied Engineering, when you gonna wake up and smell the roses?  This card
> is at LEAST 5 years older than the Z80 Plus and runs 6 times faster.
> 

Sure it beats those cards.  But what about //c owners who want to
run CP/M?  Just tell me where one can get an Applicard-type device
for the //c and I'll be happy knowing that you're a little bit
rational.

BTW, what about those of us who can't currently afford an
Applicard?  What are we to do now?  Are we in the stone ages?  We
might, but if we get the job done, and it may take a bit longer,
who cares?!?!?  You have to realize that a lot of us can't go out
and get an Applicard at the snap of a finger.  Money doesn't grow
on trees, you know.  I personally want an Applicard myself, but I
just can't afford it.  Is there something wrong with that?  If you
think there's something wrong with me because I should be running a
PCPI card instead of a Microsoft one, and I'm able to get stuff
done, only at a slower pace, there's something wrong with your
ability to reason, bud.  SERIOUSLY wrong.

-- 
Home:   Ian Justman       |UUCP:                 |"One of the few
6612 Whitsett Drive       |                      |die-hard CP/M
North Highlands, CA  95660| pacbell!sactoh0!ianj |addicts left on this
(916) 344-5360            |                      |planet"

------------------------------

Date: Fri, 28 Jul 89 20:43 PDT
From: Steven Russell <SRUSSELL@uoneuro.uoregon.edu>
Subject: TeleVideo TPC 1

I am the proud new owner of a TeleVideo TPC 1 CP/M computer... with a busted B
drive.  Anyone out there know where I can get a replacement drive for this
beastie, and if there is anything tricky to getting the B drive installed?

Thanks in advance for any help.

-Steven Russell

srussell@uoneuro.uoregon.edu
srussell@uoneuro.bitnet

------------------------------

Date: 30 Jul 89 10:48:02 GMT
From: amdahl!pacbell!sactoh0!ianj@ames.arc.nasa.gov  (Ian R. Justman)
Subject: TeleVideo TPC 1

In article <8907290704.AA04019@ucbvax.Berkeley.EDU>, SRUSSELL@UONEURO.UOREGON.EDU (Steven Russell) writes:
> I am the proud new owner of a TeleVideo TPC 1 CP/M computer... with a busted B
> drive.  Anyone out there know where I can get a replacement drive for this
> beastie, and if there is anything tricky to getting the B drive installed?
> 

Go to wherever sells your favorite IBM peripherals and buy a
half-height 360k-style drive.  A friend of mine has one which came
with Teac drives.  He took them out and put them in his XT.  He
took the XT drives and put them in the TPC1 and it worked fine.  As
for installation, I don't know if you should let the dealer do it
or you should do it yourself for warranty reasons.
-- 
Home:   Ian Justman       |UUCP:                 |"One of the few
6612 Whitsett Drive       |                      |die-hard CP/M
North Highlands, CA  95660| pacbell!sactoh0!ianj |addicts left on this
(916) 344-5360            |                      |planet"

------------------------------

Date: Fri, 28 Jul 89 20:49 PDT
From: Steven Russell <SRUSSELL@uoneuro.uoregon.edu>
Subject: Zork

I have a question that my brother has asked me to pass on (he has no net
access).  Of late, he has become interested in a game called Zork, that he is
running on a VAX under UNIX.  He has been told that the game is available for
CP/M machines, but he doesn't know where to look.  Has anyone heard of this
game, and do any of you know of a source for it?  I understand it is a
"payware" program.  My brother and I thank y'all for any help. 

Steven Russell

srussell@uoneuro.uoregon.edu
srussell@uoneuro.bitnet


------------------------------

End of INFO-CPM Digest V89 Issue #157
*************************************